Translator Disclaimer
Paper
31 August 2015 Optical fiber Fabry-Perot refractive index sensor based on porous Al2O3 film
Author Affiliations +
Proceedings Volume 9634, 24th International Conference on Optical Fibre Sensors; 963484 (2015) https://doi.org/10.1117/12.2191484
Event: International Conference on Optical Fibre Sensors (OFS24), 2015, Curitiba, Brazil
Abstract
A fiber refractive index sensor based on porous alumina is fabricated by pasting porous alumina film with 42.36μm on single mode fiber tip using the UV-cured adhesive. Experimental results show that the proposed sensor has a very high correlation with glycerine concentration (0.0%~80.0%) with correlation coefficient of 99.771%. Its sensitivity and resolution was measure to be 99.771%, 154 nm/RIU and 1×10-4 respectively when the refractive index changes from 1.333 to 1.443.
© (2015) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Chujia Huang, Minghong Yang, Weijing Xie, and Jixiang Dai "Optical fiber Fabry-Perot refractive index sensor based on porous Al2O3 film", Proc. SPIE 9634, 24th International Conference on Optical Fibre Sensors, 963484 (31 August 2015); https://doi.org/10.1117/12.2191484
PROCEEDINGS
4 PAGES


SHARE
Advertisement
Advertisement
RELATED CONTENT

A label free aptamer based LPG sensor for detection of...
Proceedings of SPIE (September 28 2015)
Recycling optical fibers for sensing
Proceedings of SPIE (April 29 2016)
Sensing applications of U-optrodes
Proceedings of SPIE (September 08 2010)
Remote optical fiber sensor with Raman amplification
Proceedings of SPIE (July 26 2011)

Back to Top