Accurate mask registration on tilted lines for 6F2 DRAM manufacturing

K. D. Roeth; W. Choi; Y. Lee; S. Kim; D. Yim; F. Laske; M. Ferber; M. Daneshpanah; E. Kwon

doi:10.1117/12.2202818

23 October 2015 Accurate mask registration on tilted lines for 6F2 DRAM manufacturing

K. D. Roeth, W. Choi, Y. Lee, S. Kim, D. Yim, F. Laske, M. Ferber, M. Daneshpanah, E. Kwon

Author Affiliations +

Proceedings Volume 9635, Photomask Technology 2015; 963506 (2015) https://doi.org/10.1117/12.2202818
Event: SPIE Photomask Technology, 2015, Monterey, California, United States

Abstract

193nm immersion lithography is the mainstream production technology for the 22nm half pitch (HP) DRAM manufacturing. Considering multi-patterning as the technology to solve the very low k1 situation in the resolution equation puts extreme pressure on the intra-field overlay, to which mask registration error may be a significant error contributor [3]. The International Technology Roadmap for Semiconductors (ITRS [1]) requests a registration error below 4 nm for each mask of a multi-patterning set forming one layer on the wafer. For mask metrology at the 22nm HP node, maintaining a precision-to-tolerance (P/T) ratio below 0.25 will be very challenging. Mask registration error impacts intra-field wafer overlay directly and has a major impact on wafer yield. DRAM makers moved several years ago to 6F2 (figure 1, [2]) cell design and thus printing tilted lines at 15 or 30 degree. Overlay of contact layer over buried line has to be well controlled.

However, measuring mask registration performance accurately on tilted lines was a challenge. KLA Tencor applied the model-based algorithm to enable the accurate registration measurement of tilted lines on the Poly layer as well as the mask-to-mask overlay to the adjacent contact layers. The metrology solution is discussed and measurement results are provided.

Citation Download Citation

K. D. Roeth, W. Choi, Y. Lee, S. Kim, D. Yim, F. Laske, M. Ferber, M. Daneshpanah, and E. Kwon "Accurate mask registration on tilted lines for 6F2 DRAM manufacturing", Proc. SPIE 9635, Photomask Technology 2015, 963506 (23 October 2015); https://doi.org/10.1117/12.2202818

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE