Paper
9 November 2015 Actinic review of EUV masks: status and recent results of the AIMSTM EUV system
Author Affiliations +
Abstract
Key enabler of the successful introduction of EUV lithography into volume production is the EUV mask infrastructure. For the production of defect free masks, actinic review of potential defect sites to decide on the need for repair or compensation is required. Also, the repair or compensation with the ZEISS MERiT electron beam repair tool needs actinic verification in a closed loop mask repair solution. For the realization of actinic mask review, ZEISS and the SEMATECH EUVL Mask Infrastructure consortium started a development program for an EUV aerial image metrology system, the AIMSTM EUV, with realization of a prototype tool. The development and prototype realization of the AIMSTM EUV has entered the tool calibration and qualification phase utilizing the achieved capabilities of EUV aerial image acquisition and EUV mask handling. In this paper, we discuss the current status of the prototype qualification and show recent measurement results.
© (2015) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Sascha Perlitz, Jan Hendrik Peters, Markus Weiss, Dirk Hellweg, Renzo Capelli, Krister Magnusson, Matt Malloy, and Stefan Wurm "Actinic review of EUV masks: status and recent results of the AIMSTM EUV system", Proc. SPIE 9635, Photomask Technology 2015, 96351D (9 November 2015); https://doi.org/10.1117/12.2205054
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Extreme ultraviolet

Photomasks

Prototyping

Extreme ultraviolet lithography

Electromagnetic coupling

Calibration

Metrology

RELATED CONTENT

Actinic review of EUV masks first results from the...
Proceedings of SPIE (April 24 2014)
Status of the AIMS EUV development project
Proceedings of SPIE (October 01 2013)
Status of the AIMS(TM) EUV Project
Proceedings of SPIE (November 08 2012)
Model calibration and validation for pre-production EUVL
Proceedings of SPIE (March 23 2012)

Back to Top