You have requested a machine translation of selected content from our databases. This functionality is provided solely for your convenience and is in no way intended to replace human translation. Neither SPIE nor the owners and publishers of the content make, and they explicitly disclaim, any express or implied representations or warranties of any kind, including, without limitation, representations and warranties as to the functionality of the translation feature or the accuracy or completeness of the translations.
Translations are not retained in our system. Your use of this feature and the translations is subject to all use restrictions contained in the Terms and Conditions of Use of the SPIE website.
27 October 2015Helicopter engine exhaust rotor downwash effects on laser beams
The hot exhaust gases from engines on helicopters are pushed down by the rotor in a turbulent flow. When the optical
path of a laser beam or optical sensor passes through this region severe aberrations of the optical field may result. These
perturbations will lead to beam wander and beam distortions that can limit the performance of optical countermeasure
systems.
To quantify these effects the Italian Air Force Flight Test Centre hosted a trial for the “Airborne platform effects on
lasers and warning sensors” (ALWS) EDA-project. Laser beams were propagated from the airport control tower to a
target screen in a slant path with the helicopter hovering over this path. Collimated laser beams at 1.55-, 2- and 4.6-μm
wavelength were imaged with high speed cameras. Large increases in beam wander and beam divergence were found,
with beam wander up to 200 μrad root-mean-square and increases in beam divergence up to 1 mrad.
To allow scaling to other laser beam parameters and geometries formulas for propagation in atmospheric turbulence were
used even though the turbulence may not follow Kolmogorov statistics. By assuming that the plume is short compared to
the total propagation distance the integrated structure parameter through the plume could be calculated. Values in the
range 10-10 to 10-8 m1/3 were found when the laser beams passed through the exhaust gases below the helicopter tail. The
integrated structure parameter values calculated from beam wander were consistently lower than those calculated from
long term spot size, indicating that the method is not perfect but provides information about order of magnitudes.
The measured results show that the engine exhaust for worst case beam directions will dominate over atmospheric
turbulence even for kilometer path lengths from a helicopter at low altitude. How severe the effect is on system
performance will depend on beam and target parameters.
The alert did not successfully save. Please try again later.
Markus Henriksson, Lars Sjöqvist, Dirk Seiffer, "Helicopter engine exhaust rotor downwash effects on laser beams," Proc. SPIE 9650, Technologies for Optical Countermeasures XII; and High-Power Lasers 2015: Technology and Systems, 96500M (27 October 2015); https://doi.org/10.1117/12.2194815