Paper
9 July 2015 Grid-supported EUV pellicles: A theoretical investigation for added value
Florian Dhalluin, Laurens de Winter, Luigi Scaccabarozzi, Jack Van der Sanden, Sven Lentzen, Rob Van Gils, Maurice Bogers, Erik Ruinemans, Derk Brouns, Juan Diego Arias Espinoza, Mária Péter, Daniel Smith, Wim Van der Zande, Hans Vermeulen
Author Affiliations +
Abstract
EUV pellicle membranes are being pursued to protect scanner images from repeating defects caused by reticle fall-on particle defects. Because most materials highly absorb EUV, pellicle membranes must be ultrathin. In an attempt to increase the strength of the ultrathin membranes, grid-supported pellicle membranes have been proposed. In this study we compare grid-supported pellicles (GSP) over free-standing pellicles (FSP). We considered imaging, thermal, mechanical, and thermo-mechanical characteristics. Finite Element Methods (FEM) was used to investigate the thermal, and (thermo-)mechanical behavior of pellicles. The maximum temperature reached under operational conditions by the pellicle film was determined. Using a thermo-mechanical analysis wrinkling behavior was quantified. The mechanical analysis considered the influence of grid structures on the sagging behavior, on crack propagation, on the pellicle film resistance to collision with solid particles, and on the resistance to shocks on the pellicle frame. The analysis shows that GSP that meets imaging requirements will not bring any advantages over FSP.
© (2015) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Florian Dhalluin, Laurens de Winter, Luigi Scaccabarozzi, Jack Van der Sanden, Sven Lentzen, Rob Van Gils, Maurice Bogers, Erik Ruinemans, Derk Brouns, Juan Diego Arias Espinoza, Mária Péter, Daniel Smith, Wim Van der Zande, and Hans Vermeulen "Grid-supported EUV pellicles: A theoretical investigation for added value", Proc. SPIE 9658, Photomask Japan 2015: Photomask and Next-Generation Lithography Mask Technology XXII, 96580J (9 July 2015); https://doi.org/10.1117/12.2197454
Lens.org Logo
CITATIONS
Cited by 3 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Pellicles

Reticles

Finite element methods

Scanners

Extreme ultraviolet

Extreme ultraviolet lithography

Particles

RELATED CONTENT

EUV mask particle adders during scanner exposure
Proceedings of SPIE (April 06 2015)
Investigation of EUV pellicle feasibility
Proceedings of SPIE (April 01 2013)
EUV pellicle scanner integration for N2 nodes and beyond
Proceedings of SPIE (April 28 2023)
ASML NXE pellicle update
Proceedings of SPIE (June 27 2019)
NXE pellicle offering a EUV pellicle solution to the...
Proceedings of SPIE (March 18 2016)
CNT EUV pellicle: moving towards a full-size solution
Proceedings of SPIE (October 16 2017)

Back to Top