Paper
15 October 2015 Research on non-direct reflection columnar microstructure
B. Q. Wu, X. Z. Wang, L. H. Dong
Author Affiliations +
Proceedings Volume 9676, AOPC 2015: Optical Design and Manufacturing Technologies; 96760O (2015) https://doi.org/10.1117/12.2199358
Event: Applied Optics and Photonics China (AOPC2015), 2015, Beijing, China
Abstract
To minimize the risk of laser accidents, especially those involving eye and skin injuries, it is crucial to pay more attention to laser safety. To control the risk of injury, depending on the laser power and wavelength, a number of required safety measures have been put forward, such as specific protection walls, and wearing safety goggles when operating lasers. The direct reflection columnar microstructure can also be used for laser safety. Based on mathematical foundations , a columnar microstructure is designed by the optical design software LightTools. Simulation showed that there is a tilt angle between the emergent and incident light, the incident light being perpendicular to the microstructure, as well as the phenomenon of no direct reflection happened. A novel testing platform was built for the columnar microstructure after it was machined. The applied testing method can measure the angle between the emergent and incident light. The method lays the condition for the further research. It is shown that the columnar microstructure with no direct reflection can be utilized in laser protection systems.
© (2015) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
B. Q. Wu, X. Z. Wang, and L. H. Dong "Research on non-direct reflection columnar microstructure", Proc. SPIE 9676, AOPC 2015: Optical Design and Manufacturing Technologies, 96760O (15 October 2015); https://doi.org/10.1117/12.2199358
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Laser safety

Reflection

Reflectivity

Absorption

Injuries

Laser applications

Optical design

Back to Top