Progress in the indirect slumping technology development at MPE for lightweight x-ray optics

Mingwu Wen; Laura Proserpio; Elias Breunig; Peter Friedrich; Vadim Burwitz; Emanuel Madarasz

doi:10.1117/12.2241528

Translator Disclaimer

24 October 2016 Progress in the indirect slumping technology development at MPE for lightweight x-ray optics

Mingwu Wen, Laura Proserpio, Elias Breunig, Peter Friedrich, Vadim Burwitz, Emanuel Madarasz

Author Affiliations +

Proceedings Volume 9682, 8th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Large Mirrors and Telescopes; 968202 (2016) https://doi.org/10.1117/12.2241528
Event: Eighth International Symposium on Advanced Optical Manufacturing and Testing Technology (AOMATT2016), 2016, Suzhou, China

Abstract

Large X-ray telescopes for future observatories need to combine a big collecting area, meaning thin mirrors with large diameter, with good angular resolution. Structures have to be stiff enough to guarantee the correct profiles and positioning of such mirrors. Due to the mass limits of the launching rockets, lightweight materials and configurations are required.. The Slumped Glass Optic (SGO) group of the Max-Planck-Institute for Extraterrestrial physics (MPE) is developing the indirect slumping technology to comply with this need. This technique foresees the shaping at high temperature of thin glass foils, originally flat, to Wolter I design X-ray mirror segments, by using suitable moulds. During the thermal cycle inside an electrical oven the glass viscosity is such reduced that it allows its bending onto the mould. So the mould’s shape is replicated while still maintaining the original micro-roughness of the glass on the non-contact side that is of fundamental importance for X-ray reflections. This replication process is particularly suitable for the manufacturing of several identical optical elements, which must successively be coated with the necessary reflective layer and then aligned and integrated into supporting structures. Numerous aspects of the technology have been studied in the past, such as the selection of mould and glass materials, and the corresponding optimization of the thermal cycle parameters. During the last year, we focused on different process set-ups. The current results and status of activities will be presented in the paper.

Citation Download Citation

Mingwu Wen, Laura Proserpio, Elias Breunig, Peter Friedrich, Vadim Burwitz, and Emanuel Madarasz "Progress in the indirect slumping technology development at MPE for lightweight x-ray optics", Proc. SPIE 9682, 8th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Large Mirrors and Telescopes, 968202 (24 October 2016); https://doi.org/10.1117/12.2241528

ACCESS THE FULL ARTICLE