Translator Disclaimer
17 January 1989 Surface Morphology And Defect Structures In Microwave CVD Diamond Films
Author Affiliations +
Polycrystalline diamond films were deposited by the microwave-plasma chemical-vapor-deposition (CVD) on Si substrates using a mixture of methane and hydrogen for the source gas. In the morphology study of diamond films using a scanning electron microscope (SEM), it was found that upon increasing the methane concentration (hereafter denoted by c in units of vol%), the surface texture changed discontinuously from (111) to (100) at around c=0.4%, and gradually from (100) to microcrys-talline above c=1.2%. The diamond-Si interfaces and the defect struc-tures in the films were investigated by transmission electron micro-scopy (TEM). The film growth process was investigated by SEM, and it was found that the appearance of small grains and the formation of well-defined diamond faces took place repeatedly with time during the CVD synthesis. The film morphology of boron-doped diamond films on Si substrates and on non-doped diamond films were also presented.
© (1989) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Koji Kobashi, Kozo Nishimura, Koichi Miyata, Yoshio Kawate, Jeffrey T. Glass, and Bradley E. Williams "Surface Morphology And Defect Structures In Microwave CVD Diamond Films", Proc. SPIE 0969, Diamond Optics, (17 January 1989);

Back to Top