Paper
11 March 2016 Broadband optical amplification with water-free hexagonal double-clad Bi doped silica fiber
S. Kobayashi, M. Takahashi, M. Ohara, I. Kondo, Yusuke Fujii
Author Affiliations +
Abstract
1.3 - 1.55 micron optical amplifiers for the long distance up-stream and down-stream networks for a future increase of fiber access networks in telecommunications are attractive. A bismuth-doped silica glass has a potential of the broadband spectrum as lasers and amplifier applications at 1.3 -1.55 micron. The bismuth-doped fiber lasers and amplifiers were discussed by the MOCVD method. In this report optical amplification characteristics at 1.3 - 1.55 micron are presented with the water free hexagonal double-clad bismuth-doped silica fiber (HDC-BDF) made by the vertical axial vapor-phase deposition (VAD) method. The bismuth and aluminum ions were vapor–phase doped into the silicon and germanium oxide. Pumping into the HDC-BDF was performed by using the tilt-polished fiber from the hexagonal surface with the multimode fiber pigtail of the pumping LD. 2 dB amplified gain was obtained with less than -40 dBm CW input signal power at 1310nm.
© (2016) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
S. Kobayashi, M. Takahashi, M. Ohara, I. Kondo, and Yusuke Fujii "Broadband optical amplification with water-free hexagonal double-clad Bi doped silica fiber", Proc. SPIE 9728, Fiber Lasers XIII: Technology, Systems, and Applications, 97281R (11 March 2016); https://doi.org/10.1117/12.2212471
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Bismuth

Optical amplifiers

Optical fibers

Fiber amplifiers

Networks

Cladding

Glasses

RELATED CONTENT


Back to Top