You have requested a machine translation of selected content from our databases. This functionality is provided solely for your convenience and is in no way intended to replace human translation. Neither SPIE nor the owners and publishers of the content make, and they explicitly disclaim, any express or implied representations or warranties of any kind, including, without limitation, representations and warranties as to the functionality of the translation feature or the accuracy or completeness of the translations.
Translations are not retained in our system. Your use of this feature and the translations is subject to all use restrictions contained in the Terms and Conditions of Use of the SPIE website.
7 March 2016Type-I QW cascade diode lasers for spectral region above 3 μm
Cascade pumping of type-I quantum well gain sections was utilized to increase output power and efficiency of
GaSb-based diode lasers operating in spectral region from 3.1 to 3.3 μm. The experiment showed that the increase
of the number of cascades from two (previously used in record cascade 3 μm emitters) to three led to critical
enhancement of the differential gain and reduction of the threshold current density of λ > 3 μm lasers. Light p-doping
of the AlGaAsSb graded section did not introduce extra optical loss but aided hole transport as required for
realization of the efficient multi-stage cascade pumping scheme. Corresponding coated three-stage devices with
~100-μm-wide aperture and 3-mm-long cavity demonstrated CW output power of 500 mW near 3.18 μm at 17 °C –
more than twofold increase as compared to previous state-of-the-art diode lasers emitting only 200 mW. Three-stage
lasers with quantum wells designed to emit in the middle of methane absorption band near 3.25 μm demonstrated
record output power levels above 350 mW – nearly threefold improvement over previous non-cascade state-of-the-art
diodes. Utilization of the different quantum wells in cascade laser heterostructure was demonstrated to yield
wide gain lasers as often desired for tunable laser spectroscopy. Two step etching was applied in effort of
simultaneous minimization of both internal optical loss and the lateral current spreading in narrow ridge lasers.
The alert did not successfully save. Please try again later.
L. Shterengas, T. Hosoda, M. Wang, T. Feng, G. Kipshidze, G. Belenky, "Type-I QW cascade diode lasers for spectral region above 3 um," Proc. SPIE 9767, Novel In-Plane Semiconductor Lasers XV, 976703 (7 March 2016); https://doi.org/10.1117/12.2208933