From electrode charges on dielectric elastomers to trapped charges and electric dipoles in electrets and ferroelectrets: fundamental and applications-relevant aspects of diversity in electroactive polymers

Reimund Gerhard

doi:10.1117/12.2218300

Translator Disclaimer

15 April 2016 From electrode charges on dielectric elastomers to trapped charges and electric dipoles in electrets and ferroelectrets: fundamental and applications-relevant aspects of diversity in electroactive polymers

Reimund Gerhard

Author Affiliations +

Proceedings Volume 9798, Electroactive Polymer Actuators and Devices (EAPAD) 2016; 97980T (2016) https://doi.org/10.1117/12.2218300
Event: SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring, 2016, Las Vegas, Nevada, United States

Abstract

Some recent developments in the areas of soft and basically incompressible electro-electrets (dielectric elastomers) with large strains, of anisotropic polymer ferro- or piezo-electrets with quasi-ferroelectric behavior, of moleculardipole electrets with significant ferro-, pyro- and piezo-electricity, and of space-charge polymer electrets with locally stabilised charges are described. Such materials may be applied, e.g., in soft actuators, energy harvesters and flexible and stretchable sensors for devices such as artificial muscles, electrically controllable refractive and diffractive optics, flexible pyroelectric detectors, motion and displacement sensors, earphones and microphones, ultrasonic transducers, air filters, radiation dosimeters, etc. The performance of dielectric elastomers for actuator, energy-harvester and sensor applications relies on a high relative permittivity and a low elastic modulus. High densities of electric charges in the electrodes are required in order to provide large Maxwell stresses or high energy densities. Significant amounts of localised or trapped charges, as well as electric dipoles from pairs of charges, lead to useful electro-mechanical and mechano-electrical effects (or inverse and direct piezoelectricity, respectively) if they are properly arranged in dielectric materials with extremely low conductivities. Space-charge electret films and ferroelectret systems should exhibit thermal and long-term stability of the trapped charges within the respective materials. Ferroelectric polymers and other polar polymers show useful piezo- and pyroelectric properties if their polymer-chain conformations allow for parallel packing of the molecular dipoles. Space-charge and molecular-dipole electrets are widely applied, e.g. in microphones, air filters, radiation dosimeters, ultrasonic transducers, etc. Basically, the performance of all electro-active polymers relies on the attraction (and repulsion) of electric charges and thus directly on the electro-magnetic interaction, one of the four fundamental interactions.

Conference Presentation

Citation Download Citation

Reimund Gerhard "From electrode charges on dielectric elastomers to trapped charges and electric dipoles in electrets and ferroelectrets: fundamental and applications-relevant aspects of diversity in electroactive polymers", Proc. SPIE 9798, Electroactive Polymer Actuators and Devices (EAPAD) 2016, 97980T (15 April 2016); https://doi.org/10.1117/12.2218300

ACCESS THE FULL ARTICLE