You have requested a machine translation of selected content from our databases. This functionality is provided solely for your convenience and is in no way intended to replace human translation. Neither SPIE nor the owners and publishers of the content make, and they explicitly disclaim, any express or implied representations or warranties of any kind, including, without limitation, representations and warranties as to the functionality of the translation feature or the accuracy or completeness of the translations.
Translations are not retained in our system. Your use of this feature and the translations is subject to all use restrictions contained in the Terms and Conditions of Use of the SPIE website.
15 December 2015Dielectric barrier discharge KrCl- and XeCl-excilamps radiation power control by pressure jump method
The energy dissipation processes in dielectric barrier discharge KrCl- and XeCl-excilamps at various voltage, frequencies and pulse duration are revealed by a pressure jump method. It is offered and tested a way of radiation power calculation in conditions of non-uniform filling of device bulb by discharge plasma. The previous data (Pikulev A.A., Sosnin E.A., 2010-2013) are confirmed. The regularity was formulated: conditions of maximal ultraviolet radiation power corresponds to conditions of maximal heat release in plasma.
The alert did not successfully save. Please try again later.
Eduard A. Sosnin, Vladimir S. Kuznetsov, Мaria V. Didenko, Victor A. Panarin, "Dielectric barrier discharge KrCl- and XeCl-excilamps radiation power control by pressure jump method," Proc. SPIE 9810, International Conference on Atomic and Molecular Pulsed Lasers XII, 98101U (15 December 2015); https://doi.org/10.1117/12.2224940