Translator Disclaimer
4 August 2016 Architecture design study and technology road map for the Planet Formation Imager (PFI)
Author Affiliations +
The Planet Formation Imager (PFI) Project has formed a Technical Working Group (TWG) to explore possible facility architectures to meet the primary PFI science goal of imaging planet formation in situ in nearby starforming regions. The goals of being sensitive to dust emission on solar system scales and resolving the Hill-sphere around forming giant planets can best be accomplished through sub-milliarcsecond imaging in the thermal infrared. Exploiting the 8-13 micron atmospheric window, a ground-based long-baseline interferometer with approximately 20 apertures including 10km baselines will have the necessary resolution to image structure down 0.1 milliarcseconds (0.014 AU) for T Tauri disks in Taurus. Even with large telescopes, this array will not have the sensitivity to directly track fringes in the mid-infrared for our prime targets and a fringe tracking system will be necessary in the near-infrared. While a heterodyne architecture using modern mid-IR laser comb technology remains a competitive option (especially for the intriguing 24 and 40μm atmospheric windows), the prioritization of 3-5μm observations of CO/H2O vibrotational levels by the PFI-Science Working Group (SWG) pushes the TWG to require vacuum pipe beam transport with potentially cooled optics. We present here a preliminary study of simulated L- and N-band PFI observations of a realistic 4-planet disk simulation, finding 21x2.5m PFI can easily detect the accreting protoplanets in both L and N-band but can see non-accreting planets only in L band. We also find that even an ambitious PFI will lack sufficient surface brightness sensitivity to image details of the fainter emission from dust structures beyond 5 AU, unless directly illuminated or heated by local energy sources. That said, the utility of PFI at N-band is highly dependent on the stage of planet formation in the disk and we require additional systematic studies in conjunction with the PFI-SWG to better understand the science capabilities of PFI, including the potential to resolve protoplanetary disks in emission lines to measure planet masses using position-velocity diagrams. We advocate for a specific technology road map in order to reduce the current cost driver (telescopes) and to validate high accuracy fringe tracking and high dynamic range imaging at L, M band. In conclusion, no technology show-stoppers have been identified for PFI to date, however there is high potential for breakthroughs in medium-aperture (4-m class) telescopes architecture that could reduce the cost of PFI by a factor of 2 or more.
© (2016) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
John D. Monnier, Michael J. Ireland, Stefan Kraus, Fabien Baron, Michelle Creech-Eakman, Ruobing Dong, Andrea Isella, Antoine Merand, Ernest Michael, Stefano Minardi, David Mozurkewich, Romain Petrov, Stephen Rinehart, Theo ten Brummelaar, Gautam Vasisht, Ed Wishnow, John Young, and Zhaohuan Zhu "Architecture design study and technology road map for the Planet Formation Imager (PFI)", Proc. SPIE 9907, Optical and Infrared Interferometry and Imaging V, 99071O (4 August 2016);


Image reconstruction with MATISSE at the VLTI
Proceedings of SPIE (July 24 2014)
Status of the Planet Formation Imager (PFI) concept
Proceedings of SPIE (August 04 2016)
Planet formation imager: project update
Proceedings of SPIE (July 09 2018)
A conceptual design for an exoplanet imager
Proceedings of SPIE (September 19 2007)
Science at mid-infrared wavelengths with large telescopes
Proceedings of SPIE (February 13 2003)
VSI: the VLTI spectro-imager
Proceedings of SPIE (July 28 2008)

Back to Top