Paper
22 July 2016 A segmented subreflector with electroformed nickel laminated panels for the Large Millimeter Telescope
G. Valsecchi, R. Banham, G. Bianucci, J. Eder, R. Ghislanzoni, A. Ritucci, M. Terraneo, F. E. Zocchi, D. Smith, D. Gale, D. Hughes
Author Affiliations +
Abstract
The Large Millimeter Telescope (LMT) Alfonso Serrano is a 50 m diameter single-dish radio telescope optimized for astronomical observations at wavelengths of about a millimeter. Built and operated by the Instituto Nacional de Astrofísica, Óptica y Electrónica (INAOE) in collaboration with the University of Massachusetts (UMASS), the telescope is located at the 4600 m summit of volcano Sierra Negra, Mexico. Anticipating the completion of the main reflector, currently operating over a 32 m subaperture, INAOE has contracted Media Lario for the design and manufacturing of a new 2.63 m subreflector that will enable higher efficiency astronomical observations with the entire main reflector surface. The new subreflector manufactured by Media Lario is segmented in 9 smaller panels, one central dome and eight identical petals, assembled and precisely aligned on a steel truss structure that will be connected to the hexapod mounted on the tetrapod head. Each panel was fabricated with Media Lario’s unique laminated technology consisting of front and rear Nickel skins, electroformed from precise molds and bonded to a lightweight Aluminum honeycomb core. The reflecting surface of each panel was given a thin galvanic Rhodium coating that ensures that the reflector survives the harsh environmental conditions at the summit of Sierra Negra during the 30 year lifetime of the telescope. Finally, the 2.63 m subreflector produced by Media Lario was qualified for typical cold night through hot day observation conditions with a maximum RMS error of 24.8 μm, which meets INAOE’s requirements.
© (2016) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
G. Valsecchi, R. Banham, G. Bianucci, J. Eder, R. Ghislanzoni, A. Ritucci, M. Terraneo, F. E. Zocchi, D. Smith, D. Gale, and D. Hughes "A segmented subreflector with electroformed nickel laminated panels for the Large Millimeter Telescope", Proc. SPIE 9912, Advances in Optical and Mechanical Technologies for Telescopes and Instrumentation II, 99123P (22 July 2016); https://doi.org/10.1117/12.2232390
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Telescopes

Telescopes

Nickel

Skin

Reflectors

Reflectors

Manufacturing

Back to Top