Paper
7 September 2016 Uniformity of LED light illumination in application to direct imaging lithography
Ting-Ming Huang, Shenq-Tsong Chang, Ho-Lin Tsay, Ming-Ying Hsu, Fong-Zhi Chen
Author Affiliations +
Abstract
Direct imaging has widely applied in lithography for a long time because of its simplicity and easy-maintenance. Although this method has limitation of lithography resolution, it is still adopted in industries. Uniformity of UV irradiance for a designed area is an important requirement. While mercury lamps were used as the light source in the early stage, LEDs have drawn a lot of attention for consideration from several aspects. Although LED has better and better performance, arrays of LEDs are required to obtain desired irradiance because of limitation of brightness for a single LED. Several effects are considered that affect the uniformity of UV irradiance such as alignment of optics, temperature of each LED, performance of each LED due to production uniformity, and pointing of LED module. Effects of these factors are considered to study the uniformity of LED Light Illumination. Numerical analysis is performed by assuming a serious of control factors to have a better understanding of each factor.
© (2016) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Ting-Ming Huang, Shenq-Tsong Chang, Ho-Lin Tsay, Ming-Ying Hsu, and Fong-Zhi Chen "Uniformity of LED light illumination in application to direct imaging lithography", Proc. SPIE 9954, Fifteenth International Conference on Solid State Lighting and LED-based Illumination Systems, 99540Q (7 September 2016); https://doi.org/10.1117/12.2237441
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Light emitting diodes

Lithography

Lithographic illumination

Ultraviolet radiation

Optical alignment

Lamps

Mercury

RELATED CONTENT


Back to Top