Optical frequency combs, a revolutionary light source characterized by discrete and equally spaced frequencies, are usually regarded as a cornerstone for advanced frequency metrology, precision spectroscopy, high-speed communication, distance ranging, molecule detection, and many others. Due to the rapid development of micro/nanofabrication technology, breakthroughs in the quality factor of microresonators enable ultrahigh energy buildup inside cavities, which gives birth to microcavity-based frequency combs. In particular, the full coherent spectrum of the soliton microcomb (SMC) provides a route to low-noise ultrashort pulses with a repetition rate over two orders of magnitude higher than that of traditional mode-locking approaches. This enables lower power consumption and cost for a wide range of applications. This review summarizes recent achievements in SMCs, including the basic theory and physical model, as well as experimental techniques for single-soliton generation and various extraordinary soliton states (soliton crystals, Stokes solitons, breathers, molecules, cavity solitons, and dark solitons), with a perspective on their potential applications and remaining challenges.
Optical microcavities, which emerged from the rapid development of modern micro/nanofabrication technologies, have grown to be revolutionary devices that light the way toward several fantastic applications, including advanced light sources, ultrafast optical signal processing, and ultrasensitive sensors, benefitting from their unprecedented small size and high buildup of energy inside the resonators.1 The resonant optical field can be strongly enhanced in a high-quality () factor microcavity, which results in long light–matter interaction lengths and ultralow thresholds for nonlinear optical effects.2,3 In the case of microcavities made of materials with inversion symmetry (e.g., silica, silicon nitride, or crystals), the elemental nonlinear interaction is third-order nonlinearity, which gives rise to the parametric process of four-wave mixing (FWM). Together with the intrinsic filter character of microresonators, discrete optical frequency components with equal spacing can be generated, which are termed micro-optical frequency combs ( or microcombs). Compared with traditional OFCs built on mode-locked solid-state or fiber lasers, microcomb is considered a new type of coherent light source that shows unique and promising advantages of lower power consumption as well as whole system integratability. Further, microcombs are also capable of generating ultrashort pulses with gigahertz to terahertz repetition rates,4,5 which is far beyond the limitations of physical cavity length for conventional lasers; thus, they can find important applications in fundamental physical precision metrology.6 Therefore, microcombs have been developed as a powerful alternative that enables miniaturization of OFCs and opens investigations into new nonlinear physics and corresponding applications.
Technically speaking, the character of microcomb mainly depends on microresonator properties as well as the pumping parameters (e.g., pump power and frequency detuning). The factor, dispersion profile, and cavity mode of a microresonator directly decide the threshold, bandwidth, and frequency spacing (and other related features) of emitted combs, respectively, while the pump settings determine the operation states and output performance such as the spectral envelope and noise characteristic. Since the landmark demonstration in 2003 of the high- toroid microcavity with a -factor in excess of 100 million,7 considerable efforts have been made to improve the of microcavities on various material platforms by developing fabrication techniques as well as more reliable approaches for generating broadband low-noise microcombs, as shown in Fig. 1. For example, Kippenberg et al.2 obtained several discrete comb lines through optical parametric oscillation (OPO) in a silica toroid microcavity in 2004; thereafter, Del’Haye et al.8 successfully achieved a microcomb covering in the telecom band in 2007. In 2011, Okawachi et al. 9 suggested that the noise of microcomb can be lowered through varying the pump detuning. One special mode-locked comb, termed a soliton microcomb (SMC), can be evolved from the primary comb and modulation instability (MI) comb while the pump sweeps across a resonance from the blue-to-red detuned regime.10 Physically, solitons can be spontaneously organized in a continuous wave (CW)-driven microresonator, where double balances, nonlinearity and dispersion as well as dissipation and gain, are reached.10 However, the states of microcombs are dependent on the pump-resonance detuning, where multiple operation possibilities exist for a resonator at a given pump power and frequency.11 When the chaotic MI state transitions to the soliton state, the dramatic intracavity power drop can result in pump frequency shifting out of the cavity resonance through a thermo-optical effect, so achieving stable soliton operation is a great challenge in practical experiments. To overcome the strong thermal-optical effect that hinders steady SMC access, various schemes have been implemented. A representative work is the first temporal soliton generation using a frequency-scanning method;10 since then “power-kicking,”12,13 thermal tuning,14 and auxiliary-laser-based15,16 methods have been introduced. Meanwhile, rich types of soliton states, including Stokes soliton induced by the Raman effect,17 dual-soliton generation in a single microcavity,18 soliton crystals,19 breathers,20 laser cavity solitons,21 soliton molecules,22 and dark pulse states operating in a normal-dispersion regime,23 have all been discovered (Fig. 1). And a variety of nonlinear phenomena (e.g., dispersive wave, mode crossing, and Raman self-frequency shift) that are closely related to the characteristics of microresonators have also been disclosed.12,24–27 All of these achievements suggest that SMCs can establish an interface between soliton physics and integrated photonics as well as materials science.
Until now, based on advanced experimental techniques, SMCs have been realized in an whispering-gallery-mode (WGM) resonator,10 silica disk13 and microrod,28,29 AlN,30 ,31 and CMOS-compatible microring resonator of SiN,12 Si,32 and high-index doped silica glass.15 Table 1 briefly summarizes some typical SMCs obtained on various material platforms with distinct cavity properties. Furthermore, because of the developed fabrication process and improved-dispersion engineering, SMCs with different spectral coverages have been demonstrated on various material platforms. As shown in Fig. 2, SMC generation in the visible,31,33 near-,10,13,15,30,34,35 and mid-infrared36 regions have all been achieved, covering a wavelength range of down to 31 and up to .36 Benefitting from the full coherent feature across the whole spectral coverage10–12,37 the advent of SMCs has promoted research in various applications, such as dual-comb spectroscopy (DCS),38 terabit coherent optical communications,39 photonic-integrated frequency synthesizers,40 ultrafast distance measurements,41 and calibration of astrophysical spectrometers for exoplanet searching.42 Beyond these developed applications, SMCs are also relevant to a large variety of physical systems that could provide ideal testbeds for fundamental theory of nonlinear wave dynamics research.43,44
Typical parameters of reported SMCs.
|Material||Structure||Q||FSR (GHz)||Wavelength range (nm)||Types||Refs.|
|Rod||35.2||1520 to 1590||Solitons||10|
|Rod||14||1520 to 1590||Solitons||24|
|Rod||25.78||1540 to 1580||Solitons||36|
|Rod||12.5||1526 to 1548||Solitons||45|
|Disk||22||1510 to 1600||Solitons||13|
|Disk||1025 to 1125 and 760 to 790||Solitons||33|
|Disk||22||1600 to 1650||Stokes solitons||17|
|Disk||1.8 to 33||1530 to 1570||Solitons||4|
|Disk||26, 16.4||1540 to 1580||Soliton crystals||46|
|Disk||22||1510 to 1590||Solitons||47|
|Rod||55.6||1520 to 1590||Solitons||28|
|Rod||50||1530 to 1590||Solitons||29|
|AlN||Ring||1400 to 1700||Solitons||30|
|SiN||Ring||189||1330 to 2000||Solitons||12|
|SiN||Ring||1000||1100 to 2300||Solitons||48|
|SiN||Ring||1000||1420 to 1700||Solitons||49|
|SiN||Ring||1000||850 to 2000||Solitons||34|
|SiN||Ring||200||1440 to 1660||Solitons||50|
|SiN||Ring||200||1470 to 1620||Breathers||51|
|SiN||Ring||1450 to 1700||Breathers||20|
|SiN||Ring||194||1540 to 1640||Solitons||52|
|SiN||Ring||99||1570 to 1630||Solitons||53|
|SiN||Ring||776 to 1630||Solitons||35|
|SiN||Ring||231.3||1460 to 1610||Dark pulses||23|
|Doped silica glass||Ring||49||1480 to 1650||Solitons||15|
|Doped silica glass||Ring||49||1480 to 1650||Soliton crystals||19|
|Doped silica glass||Ring||49||1510 to 1580||Cavity solitons||21|
|Silicon||Ring||127||2800 to 3800||Breathers||51|
|Ring||199.7||750 to 800 and 1460 to 1650||Solitons||31|
|Ring||1830 to 2130||Solitons||55|
In this review, we summarize recent experimental achievements with a perspective on the potential and challenges. The remainder of this paper is organized as follows. Sec. 2 introduces the basic theory and physical model of microcomb generation. In Sec. 3, we mainly focus on the presented techniques for single SMC generation, including the rapid frequency and thermal tuning, power-kicking, forward and backward sweeping, auxiliary-laser-assistance, self-injection-locking using CW lasers, and synchronous driving by pulsed sources. Various extraordinary soliton states, including soliton crystals, Stokes solitons, breathers, soliton molecules, laser cavity solitons, and dark pulses, are discussed in Sec. 4. Finally, in Sec. 5, a brief summary of the valuable applications of SMCs is given, and an outlook on the underlying challenges and opportunities for this field is presented in Sec. 6.
Physics and Numerical Models for Microcombs
The generation of microcombs arises from parametric frequency conversion through the FWM effect that generates a pair of photons (a signal and an idler) that are equally spaced to the pump. The photonic interaction can be expressed as , where , , and are the pump, signal, and idler angular frequencies, respectively. The frequencies of the newly generated photons are resonance enhanced in microcavity resonances , where is the angular frequency of the free-spectral-range (FSR) that is determined by the cavity optical length and is the mode number with the assumption of the pump at mode 0. For theoretical description of the microcomb formation mechanism, firstly the evolution of each mode amplitude can be modeled using a nonlinear wave equation. Then the microcomb generation process can be completely described by a set of autonomous, nonlinear, and coupled ordinary differential equations, which are called coupled mode equations (CMEs):56,57
The CMEs have been successfully used to determine the threshold and explain the role of dispersion as well as other mechanisms in the microcomb formation. However, the amount of computation increases dramatically with increases in the mode number. Through considering the total intracavity field an entirety , where is the azimuthal angle along the resonator, the CMEs can be simplified to the equivalent approach of the Lugiato–Lefever equation (LLE), which is also referred to as the spatiotemporal model:58–60
Based on the LLE, mode-locked microcombs have been predicted and rich physical phenomena have been explained, including the single soliton with dispersion wave,12 soliton crystals by taking into account of perturbation,46 and dark pulse states with a modified form to involve mode interaction.23 Raman self-frequency shift was also precisely simulated by adding the Raman response item to the LLE, where indicates the Raman fraction and is the Raman response function.25,27
Experimental Schemes for Single SMC Generation
It has been found that SMC can be spontaneously formed while a CW pump stabilizes in the red-detuned regime of a dissipative nonlinear microcavity. However, the soliton existing range exhibits thermal instabibility for microcavities with negative temperature coefficients, which blinded SMC observation for more than 6 years since the first microcomb realization.8,10 Therefore, the major challenge for SMC generation has been how to stabilize a pump in the red-detuned regime of a microcavity. An intuitive thought is preventing the cavity from heating up before the pump sweeping to the soliton existing range, such as the frequency scanning method for SMC realization in a low thermal-optic coefficient microcavity.10 Since then several equivalent and more universal schemes have been developed, e.g., the power-kicking, thermal tuning, and self-injecting locking methods. Another solution for SMC generation is realizing the intracavity thermal balance using an auxiliary laser to maintain the intracavity optical power. Taking advantage of the smooth spectral envelope and fixed temporal spacing, single SMC is the most desired soliton state for applications, which gives rise to great research interest for deterministic single SMC generation, wherein the backward frequency/temperature scanning and pulse-pumped schemes have been introduced. In this section, we will focus on the experimental progress of single SMC generation.
The basic idea of the frequency-scanning method is sweeping the pump to the red-detuned regime before the microcavity is heated up by the thermo-optic effect. Generally, the frequency-scanning speed is determined by the thermo-optic response time, -factor, as well as the pump power.10,25,44,61–63 This method is first introduced for SMC generation in an microresonator. The experimental setup is shown in Fig. 3(a).10 A tunable narrow-linewidth laser is used as the pump with its frequency sweeping speed and scanning range controlled by an electrical signal. The soliton existing range shows regional thermal stability due to the self-phase and cross-phase modulation (XPM) induced nonlinear phase shift. Therefore, the intracavity thermal equilibrium can be reached when the pump sweeps to the red-detuned regime with an appropriate speed, which leads to SMC generation and maintenance. Figure 3(b) presents the transmission power trace when the pump scans over one cavity resonance. Before the pump reaches the zero-detuning point, the intracavity optical field first evolves from the primary comb (I) to the subcomb (II) and then to the MI comb (III) state in succession; the corresponding optical spectra are shown in Fig. 3(c). Once the pump transmits into the red-detuned regime, the intracavity power suffers a sudden decline and exhibits transmission steps that indicate the generation of SMCs. Figure 3(d) presents the optical spectra for one-, two-, and five-soliton states. Since the SMCs are fully coherent, the corresponding beat notes exhibit sharp frequency lines [insets of Fig. 3(d)], reflecting excellent low-noise characteristics.
The pump frequency-scanning method is a fundamental and intuitional approach for SMC generation. The success of this method relies on the control of the pump frequency sweeping speed and accuracy. The laser scanning time should be comparable to the cavity lifetime and thermal lifetime of the microresonator, which has a very high and relatively large thermal volume. Meanwhile, the laser wavelength should exactly stabilize at the soliton steps. Because of the limited tuning speed and the frequency accuracy or stability of tunable lasers, it is a challenge for single SMC generation in microresonators with short thermal lifetimes.63 To improve the applicability of the frequency-scanning method, a single-sideband suppressed-carrier (SSB-SC) frequency shifter is introduced to improve the frequency tuning speed as well as the frequency control accuracy, which is determined by the driven radio-frequency signal. Using an SSB-SC as a frequency shifter, SMCs have been realized in and AlN microresonators with soliton steps lengths on the order of tens to hundreds of nanoseconds.30,47
For some special cases, SMCs can also be generated with relatively slow scanning speeds once the thermal dynamics during soliton formation can be stabilized by other approaches. For example, a partial overlapping mode can be used to compensate for the thermal dissipation when the pump tunes to the red-detuning regime. By taking advantage of an adjacent mode family in a specific microring, the thermal challenge is overcome for stable SMC generation.48 Additionally, through scanning the pump to a fixed frequency, delayed spontaneous soliton generation from the chaotic state is also observed, which is tuning speed independent.49
For microresonators with a high thermal-optic effect, the durations of soliton steps are so short that stopping the laser frequency exactly within these steps is technically difficult.63 As shown in Figs. 4(c)–4(e), the typical durations of soliton steps are on the order of submicroseconds for microresonators. It becomes a great challenge to stabilize the pump in such short soliton steps considering the performance of practical tunable lasers. A more universal solution is using modulators to control the pump power and timing sequence stringently, which is termed the power-kicking approach.12
A typical experimental setup is shown in Fig. 4(a). More details concerning this technique are depicted in Fig. 5, where the pump laser passes through an electro-optic modulator (EOM), an EDFA, and an acousto-optic modulator (AOM) before coupling to a microresonator.63 First, the AOM lowers the pump power before the laser tunes into the resonance and increases the pump power within soliton steps at the end of the thermal triangle of the resonance. Second, a fast pump power drop modulated by EOM is introduced before the pump sweeps across the zero-detuning point. The fast power drop reduces the nonlinear thermal and induces a fast zero-detuning transition of the pump laser. Accordingly, the pump power, modulation depth, and initial timing should be carefully optimized for stable SMC generation.63 Examples of the timing sequence of the pump frequency sweeping, fast EOM modulation, and slow AOM modulation are shown in Figs. 5(b)–5(e). Such a “power-kicking” method has proved to be capable of achieving reliable transition into soliton state, and solitons with over 2/3 octave bandwidth were observed [Fig. 4(f)] benefitting from the soliton-induced Cherenkov radiation.12
For cases with long enough soliton steps (e.g., longer than several microseconds), a single AOM can provide enough modulation speed for SMC generation. Additionally, the pump parameters can be adjusted with an active feedback loop to realize active capture and stabilization of temporal solitons.64 The power-kicking scheme has been widely used in some proof-of-concept applications such as DCS38 and microcomb-based range measurement.65 However, additional modulators and the precision control circuit complicate the SMC system, which increases the technical difficulties for miniaturized integration. Therefore, more compact SMC generation approaches, such as the thermal-tuning method and self-injected locked scheme, have been developed and are discussed next.
An equivalent approach for SMC generation is shifting the resonances of a microresonator through a thermal-tuning method rather than tuning the pump frequency. As shown in Fig. 6, a narrow-linewidth laser with a fixed frequency is used as the pump, and the microcavity resonances are thermally controlled by an on-chip heater.14 Through controlling the heater current, the cavity resonances can shift at a sufficiently high speed that is induced by changing the waveguide refractive index due to the thermo-optic effect. Along with the current reducing (temperature decreasing), one resonance passes through the pump and characteristic soliton steps can be observed as shown in Fig. 6(b). Although the lifetime of these soliton steps is on the order of microseconds, SMCs can still be obtained because of the high control accuracy of the heater current tuning speed and stop value.
In principle, the thermal-tuning method can be regarded as a variant of the pump frequency-scanning method. Compared with tunable lasers, fixed frequency lasers usually have much narrower linewidth and lower noise. So it is attractive for soliton generation using a fixed frequency laser to improve the microcomb performance. Meanwhile, a fixed frequency laser has a smaller footprint and the integration technique of current source is rather mature, so the thermal-tuning method has the potential to realize a fully integrated microcomb.52
Because the challenges of SMC generation mainly arise from the thermal instability of the soliton existing range, it is reasonable to imagine that the thermal effect can be solved by maintaining the intracavity optical power at a similar level during SMC generation. It is noted that microresonators exhibit contrary thermal characters when pumps are located at the blue- and red-detuned regimes. As a result, the dramatic decrease of intracavity heat when a pump laser tunes into a soliton existing range can be effectively compensated for by an auxiliary laser located at the blue-detuned regime. This principle has been verified recently,15,16,28,29,34 and the requirement for a rigid tuning time (on the order of thermal lifetime) can be relaxed using the auxiliary-laser-assisted approach.
A typical experimental setup is shown in Fig. 7(a), where the auxiliary and pump lasers are counter-coupled into a microresonator.16 Figure 7(b) shows the relative position of resonances and lasers during the tuning process. First, the auxiliary laser is settled at the blue-detuned side, which approaches the resonance peak. Then the pump is tuned into another resonance from the counter-propagating direction. Once the pump laser enters the red-detuned regime, the intracavity power drop can be compensated for by the auxiliary laser and the cavity resonance could be stabilized. Therefore, transition from the chaotic comb to soliton states can be stably realized, and the tuning process is no longer dependent on the tuning speed. As shown in Fig. 7(c), during the soliton generation process, the total intracavity power remains at a similar level, which avoids the resonance drifting.
Based on the auxiliary-laser-assistant thermal-balance approach, a new SMC regime is discovered in which the soliton power exhibits a negative slope versus pump frequency detuning. It is distinct from the traditional soliton existence regime with a positive slope that is accessible via thermal locking by thermal-avoided methods. The negative slope implies that the increase of average comb power is less than the decrease of pump background, resulting in the total intracavity power decreasing with the increasing of detuning. In another experiment, it is proved that the durations of soliton steps can be extended by two orders of magnitude under the assistance of a codirectional-coupled auxiliary laser, enabling robust soliton generation by even manual tuning of the pump frequency into resonance with sub-milliwatt-level power.29 Besides, SMCs are also realized in silica and high-index doped silica glass microresonators.15,28
All of these experimental results suggest that using an auxiliary laser can contribute to intracavity thermal equilibrium. It is regarded as an effective and universal method for stable SMC generation. Further, the auxiliary laser provides an additional degree of freedom for microcomb dynamic research. For example, the frequency spacing of the auxiliary and pump lasers has a significant impact on the microcomb states, and the beating between the auxiliary and pump lasers provides an optical lattice for soliton capture, which would be helpful for soliton crystal generation. This method can also provide a feasible approach to realizing spectral extension and synchronization of a microcomb in a single microresonator.67
Photorefractive Effect for Stable SMC Generation
Because of the negative temperature coefficient of microresonators, the soliton existing range exhibits thermal instability, which results in complex pump tuning techniques for SMC generation. By contrast, if the refractive index of a microresonator decreases with increasing intracavity optical power, the pump can enter the red-detuned regime stably for SMC generation, just like the MI comb generation in a negative temperature coefficient microresonator. It has been discovered that the photorefractive effect in a Z-cut waveguide can cause an intensity-dependent decrease in the refractive index.31 Moreover, the photorefractive effect has a stronger influence on the refractive index compared with that of the thermo-optic effect, which results in the red-detuned regime becoming a thermal stable region.31
Figure 8(a) schematically shows the influence of the photorefractive effect, which is opposite to that induced by the thermo-optic nonlinearity. The inset of Fig. 8(a) presents the measured transmission power trace while a laser passes through a resonance from the red-detuned side. It is found that the response time of the photorefractive effect is much slower than that of the thermo-optic effect. Accordingly, if the tuning speed of the pump frequency is faster than the response time of the photorefractive effect, the microresonator is first affected by the thermo-optic effect, which causes resonance red-shift and induces intracavity power increase. Therefore, three different dynamic processes may take place depending on the pump frequency tuning speed. When the pump scanning time is less than the thermal lifetime, the thermo-optic effect will dominate and no SMC can be stabilized. Once the pump scanning time is comparable to the thermal lifetime, power spikes will be observable as shown in Fig. 8(c). If the pump scanning speed further decreases, the power spikes can be effectively suppressed as shown in Fig. 8(b).
Because of the photorefractive effect, the thermal instability of the soliton existing range is completely compensated for. Therefore, SMC can be stably generated by coupling a pump into the resonance from the red-detuned side, and the pump can freely tune forward and backward for soliton switching. Meanwhile, the thermal stability of the soliton existing range can contribute to simplification of control circuits for SMC generation, which is crucial for miniaturized integration and practical applications. More interestingly, the waveguide has not only the Kerr effect but also second-order nonlinearity, which results in visible SMC generation by the second harmonic effect. It is an effective approach to realizing bichromatic microcombs when the cavity material has second- and third-orders nonlinearity simultaneously, which has also been verified in aluminum nitride microresonators.68 The second harmonic effect provides another approach for SMC generation in the visible frequency band where microcavities suffer from higher transmission loss.
Forward and Backward Tuning Method
Due to the inherently stochastic intracavity dynamics, it remains a challenge to realize repeatable soliton switching and deterministic single SMC generation if using the aforementioned strategies. For example, Fig. 9(b) shows the overlap optical power traces once the pump laser sweeps over a microresonator resonance using the forward frequency-tuning method. It clearly demonstrates that the soliton number is random, with a high probability of (predominantly), 7, 8, or 9.69 In addition, the step duration decreases with decreasing , indicating that the single SMC is not reliably accessible using only the forward-tuning technique.
After the frequency-scanning method was proposed, a forward and backward frequency-sweeping technique was introduced for deterministic single SMC generation.69 Briefly, the forward frequency tuning is first applied for multiple-SMC generation. In the next stage, the pump sweeps backward with a slow scanning speed, leading to successive reduction of the soliton number. The cavity dynamics comparison of forward and backward frequency tuning methods is shown in Figs. 9(a)–9(d). Physically, it has been revealed that the soliton-switching process depends on the character of a soliton existence range (, where and are the lower and higher boundaries of the soliton existence range, respectively). Figure 9(e) shows the measured absolute soliton existence range with different soliton numbers in a microresonator. With the decrease of the soliton number, the resonances are blue-shifted to reduce the intracavity energy, and the absolute detuning of the pump reveals a staircase pattern. The microcomb power will “jump” down the staircase steps when the pump sweeps backward; by contrast, the microcomb power drops dramatically and SMC annihilates directly when the pump continues sweeping forward. So the backward tuning technique can help to reliably access the single SMC state starting from an arbitrary multisoliton state. The backward tuning process must be adiabatic for successive soliton annihilation, i.e., thermal equilibrium is satisfied at every soliton annihilation step. Therefore, the backward scanning speed has to be much slower than the thermal relaxation rate of the microresonator. Figure 9(f) exhibits the single SMC when the pump backward sweeps at a speed of , while the forward tuning speed is .
A parallel progress on deterministic single SMC generation was fulfilled in a high-index doped silica glass microring through the forward and backward thermal-tuning method.15 The high- microcavity is butterfly packaged with a thermo-electric cooler, which contributes to convenient manipulation of the cavity temperature. An orthogonally polarized auxiliary laser is used to balance the intracavity thermal effect, which introduces a tuning speed independent of the soliton state generation. Throughout the experiments, the wavelengths of the pump and auxiliary lasers are fixed once chosen. Similarly, the multisoliton state is first obtained through decreasing the operation temperature, and then the temperature is backward-tuned for deterministic single SMC generation. The corresponding power traces for the comb light and the auxiliary laser are shown in Figs. 10(a) and 10(b), where each step represents one- or multisoliton annihilation. Figure 10(c) presents the measured optical spectra of SMCs. The forward and backward tuning method provides a feasible approach toward a program-controlled autogeneration of single SMC.
One of the ultimate goals for the microcomb field is fully integrated SMC sources. A common feature of all methods mentioned above is reliance on external narrow-linewidth pumps, which introduces great challenge for miniaturized integration. Benefitting from the advanced micro/nanofabrication technologies, ultra-high- resonators can pave the way toward soliton sources directly driven by an ordinary semiconductor laser. Recently, self-injection locking methods were demonstrated by combining an WGM resonator and a Fabry–Pérot laser diode (FP-LD).45 Figure 11(a) shows the schematic of self-injection locking in an WGM resonator. The high- microresonator plays double roles. First, it acts as an external cavity to select the LD lasing mode and narrow the linewidth via the self-injection locking effect.70,71 Second, it is used as a nonlinear low-threshold Kerr medium for soliton generation. Figures 11(b)–11(d) depict the processes of self-injection locking and SMC generation. The system can be smoothly switched into a soliton regime by tuning the FP-LD driven current. Because the back-reflection time is shorter than the thermal relaxation time, the laser frequency follows the thermally shifted cavity resonance, which suppresses the thermal instability in real time.45 As a result, the thermal instability problem can be effectively solved, which results in tuning speed independence. Therefore, this method could eliminate the requirement of special techniques for delicate amplitude or frequency manipulation.10,63,64,69
A key factor of this technique is the of the microresonator, which not only improves the backscattering light for pump frequency-locking but also lowers the needed pump power for SMC generation. Along with the success of on-chip ultra-high- microresonator fabrication, a series of achievements on directly pumped soliton generation have been realized.72–75 For example, one achievement utilizing this scheme is directly butt-coupling an FP-LD chip (InP) to a high- microcavity.72 Through tuning the drive current of the FP-LD, the laser is first switched to single-mode lasing; then MI comb, breather soliton, and single soliton are realized consecutively. Very recently, the factor of a microcavity has been successfully boosted to with the improved fabrication process, and a butterfly packaged SMC source at a radio frequency rate of 15 GHz is realized.74 The employed self-injection locking scheme also shows a unique feature of permitting soliton generation through binary turn-on and turn-off of the pump laser, which results in the “turnkey” operation without additional photonic/electronic control circuits. Another investigation shows that Kerr nonlinearity can significantly modify the locking dynamics by red-shifting the laser emission frequency, where self-phase modulation and XPM of the clockwise and counter-clockwise light enable soliton formation.75 All of this progress suggests that the self-injection locking approach has proved to be a practical and competitive technique in the development of microcombs, benefiting from eliminated requirements for complex tuning schemes or feedback loops for soliton generation and stabilization, as well as relieved power consumption introduced by redundant electronic components. Until now, because of the limited lasing power of integrated pump lasers, the bandwidth of these integrated SMCs has been limited to tens of nanometers. It is believed that microcombs with a broader bandwidth and higher power will be reached with the realization of more powerful LDs in near future. The self-injected locking method offers a new route toward combining integrated microresonators and chip-scale lasers to establish an ultracompact electrically driven SMC system.
Pulse-Pumped Single-Soliton Generation
In addition to the narrow-linewidth CW lasers, temporally structured light sources can also be used as a pump for SMC generation.11,76,77 The merits of pulse-pumped schemes are reduction of the pump power and improvement in the conversion efficiency. Meanwhile, the generated soliton pulses are copropagating with pump pulses, which results in the synchronization of repetition rates. The principle for this scheme is depicted in Figs. 12(a) and 12(b). The CW-driven soliton is supported by the resonantly enhanced CW background, while for pulse-driven case SMC can form only when the inverse driving pulse repetition rate matches the soliton roundtrip time.76 This process is akin to but different from the conventional OPO systems that also utilize a synchronous pump. The pump pulses act as optical lattices for solitons capture, which results in the generated stable femtosecond dissipative solitons locating “on top” of the driving pulses. In the first pulse-pumped SMC generation experiment, an EOM-based picosecond pulse generator was used as the pump source. Both the repetition rate () and carrier-envelope-offset frequency () of pump pulses are directly controlled via tuning the RF frequency and CW laser frequency, respectively. As shown in Fig. 12(c), when the central driving mode is scanned across a resonance from blue- to red-detuning like the frequency-tuning method, the resonator transmission shows characteristic soliton step features. The step can sustain for a wide spanning interval of [Fig. 12(d)], indicating that precise control of the driving pulse repetition rate is not strongly required for the SMC formation in a pulsed pump system.
Following the pulse-pumped cavity soliton generation in fiber and Fabry–Pérot cavities,78,79 generation has also been realized in a chip-based SiN microring, which can provide a spurious-free spectrum of resolvable calibration lines in the demonstration of a proof-of-concept microphotonic astrocomb.77 Importantly, locking cavity solitons to the external driving pulse (or soliton self-synchronization) enables direct, all-optical control of both the repetition rate and carrier-envelope offset frequency for the microcomb. Through stabilizing the subharmonically (i.e., the soliton repetition rate is twice that of the EOM frequency) driven astrocomb to a frequency standard, the absolute calibration with a precision of is successfully achieved.77 Further, through locking one microcomb mode to an atomic transition, absolute optical-frequency fluctuations at the kilohertz level over a few seconds and day-to-day have been achieved recently.80
Physically, a pulse pump can break the symmetry of a microcavity, which induces optical lattice for soliton capture. The soliton quantity is determined by the repetition rate, width of the pump pulse, and intrinsic properties of the microresonator (dispersion, -factor, etc.). Therefore, SMCs with a deterministic repetition rate can be realized through controlling the pump repetition rate and pulse width. Until now, the repetition rate of a pulse-pumped SMC is still limited to the bandwidth of EOM. Actually, repetition-rate-multiplicable SMCs can also be realized using harmonic or rational harmonic driving pulses,81 which is beneficial by improving the energy conversion efficiency and flexibility of SMCs.
Extraordinary Soliton Microcombs
Different soliton forms in microcavities besides typical single or multisolitons, such as the soliton crystals, Stokes solitons, breather solitons, soliton molecules, laser cavity solitons, and dark pulses (solitons), also exist. They present distinct behaviors in both frequency and time domains, as well as enrich soliton dynamics and physics for microcomb research. In this section, the generation of these extraordinary solitons and their unique characteristics are reviewed.
Soliton crystals defined as spontaneously and collectively ordered ensembles of copropagating solitons that are regularly distributed in a microcavity were recently discovered in silica WGM,46 ,54,82 high-index doped silica glass,19 and 83 microresonators. The generation of soliton crystals is found to be related to the extended background wave, which is formed by the beating between the mode with excess power caused by mode crossing and the pump laser. Copropagating solitons interact with each other and “crystallize” by arranging themselves into a self-organized sequence.46 Theoretically, the energy of all steady solitons circulating in a given microresonator is expected to be quantized to a certain value, which is determined by the resonator properties, pump power, and detuning. This phenomenon can be understood as the discrete steps found in the transmission power trace while sweeping the pump across a resonance.19 Therefore, the intracavity power will linearly increase with the soliton number. Once there are enough solitons coexisting in a microresonator, the total intracavity energy would approach a similar level to that of a chaotic MI state. The typical soliton crystals step appears at the peak of the transmission power trace and exhibits excellent thermal stability. The intracavity temperature fluctuation is relatively small and has little effect on the resonance frequency, so soliton crystals can be stably formed using slow tuning techniques without complex techniques to overcome the thermo-optic effect. For example, the soliton crystal generation is almost independent of the thermal or pump frequency tuning speed, even allowing manual tuning with a second-level response time. Figure 13 shows the representative optical spectral and temporal characters of soliton crystals obtained in a silica disk46 and a high-index doped silica glass microresonator.19 Because of the strong interactions between the dense soliton ensembles, soliton crystals exhibit unique “palm-like” spectra, which are the superposition of the “primary-like” and the underlying soliton spectrum. There are different soliton arrangements that induce a rich variety of soliton crystal states, such as the perfect state [Fig. 13(I a)], Schottky defects with vacancies [Figs. 13(I b)–13(I e) and 13(II a)–13(II i)], Frenkel defects [Figs. 13(I f)–13(I i) and 13(II j)], disorder [Fig. 13(I j)], superstructure [Figs. 13(I k)–13(I n) and 13(II k)], and irregular intersoliton spacings [Figs. 13(I o) and 13(II l)]. In another experiment, soliton crystals with Schottky defects are also observed in a graphene-nitride microresonator, where the cavity dispersion becomes adjustable and affects the spectral bandwidth and shape.54
A special state of soliton crystals, i.e., the perfect soliton crystals (PSCs), is defined as all solitons are evenly distributed in a cavity and experimentally observed recently.82,83 In a certain sense, such PSCs could be regarded as single SMC in a microresonator with larger FSR and thus, be capable of boosting the repetition rate to beyond THz level and breaking the limitation of bending loss for extremely small microresonators. Meanwhile, compared with single SMC in a same microresonator, the power of each comb line is multiplied by times and energy conversion efficiency by times ( for soliton number of PSCs). It is also found that, if the intracavity thermal influence is overcame, realization of PSCs with arbitrary soliton number becomes possible by adjusting the pump frequency to periodically change the background waves.83
Soliton crystals introduce a new regime of soliton physics and act as a test bed for the research of soliton interaction. The extreme degeneracy of the configuration space of soliton crystals suggests its capability in on-chip optical buffers.46 Meanwhile, benefitting from a tiny intracavity energy change, the easy accessibility and excellent stability of soliton crystals could facilitate SMCs toward a portable and adjustable system for out of laboratory applications.
Stokes soliton is a special type of soliton that arises from Kerr-effect trapping and Raman amplification when a first soliton (primary soliton) is present.17 Figure 14(a) shows the principle of Stokes soliton, with its spectrum located in the Raman gain range and the repetition rate autolocked to the primary comb through Kerr-phase modulation. Considering the dispersion of microcavities, the Stokes soliton occupies a different mode family, which has a similar FSR at the Raman gain band. The FSRs of different transverse mode families of a silica microdisk cavity are shown in Fig. 14(b). It clearly shows that the Stokes soliton mode at a wavelength of 1593 nm has a near-identical FSR with the primary soliton mode at the pump wavelength of 1550 nm.17 In the experiment, primary soliton is first excited using the power-kicking method. As the Stokes soliton originates from the Raman effect, which has a threshold power to obtain sufficient Raman gain to overcome round-trip loss, once the Stokes soliton is generated, the primary soliton power is clamped to a steady value and the Stokes soliton power is increased beyond the primary soliton power. A typical spectrum of the Stokes soliton is shown in Fig. 14(d); its central wavelength is 1593 nm, which is consistent with the mode analysis. The inset of Fig. 14(d) shows the high-resolution spectrum, which confirms a different mode is used for Stokes soliton generation. The measured RF spectra of the isolated primary and Stokes solitons are shown in Fig. 14(c), where the beating spectra are aligned, which verify the automatching of repetition rates of the Stokes soliton and primary soliton.
The central wavelength of the Stokes soliton relies on the FSR matching of distinct mode families, which offers a potential approach for controllable multicolor soliton generation through advanced-dispersion engineering techniques.84 Thus, it contributes to the SMC generation even in the spectrum range where anomalous-dispersion or high-power pump is not achievable.
Distinct from the stationary soliton states mentioned above, breather solitons show periodic oscillation in both pulse amplitude and duration20,51,85–87 as schematically shown in Figs. 15(a) and 15(b). Physically, breather solitons are nonlinear waves in which the energy is localized in space but oscillates in time (or vice versa), which has been found in various subfields of natural science.88,89 To date, breather solitons have been observed in different material platforms, including ,20,51,85,88 crystalline,85,88 and Si51 microresonators. The typical operation regime and accessing method of breather solitons are illustrated in Fig. 15(c), whereas the simulated transmission power trace versus pump detuning is depicted in Fig. 15(d). It can be clearly seen that the breather soliton regime is between the unstable MI and steady soliton regimes,51 and breather solitons are generated with a relatively small pump detuning range. Therefore, an additional step is usually required for breather soliton generation. That is, first tune the laser to excite stable solitons as usual (e.g., via forward frequency scanning), and then, importantly, tune the pump laser backward together with increasing the pump power for the realization of breather solitons [Fig. 15(c)]. Note that this process is similar to but different from the forward and backward tuning method mentioned above, where the backward-tuning process is a necessary adiabatic step for deterministic single SMC generation. Compared with stationary solitons, the spectra of breather solitons are characterized by a sharp top and a quasitriangular envelope (on logarithmic scale) [Fig. 15(e)] instead of the sech2-like profile, resulting from the averaging of the oscillating comb bandwidth by an optical spectrum analyzer. Meanwhile, for the RF spectra, breather solitons are identified by sharp tones that indicate oscillation at a low frequency (the fundamental breathing frequency and its harmonics) rather than a single one at the cavity repetition rate, suggesting the low-noise feature of the stationary soliton state [Fig. 15(f)].
The breather soliton state also can be triggered by avoided mode crossings (regarded as the intermode breather soliton), which is a ubiquitous phenomenon in multimode microresonators as illustrated in Figs. 16(a) and 16(b).85 Usually, in the absence of intermode interactions, solitons in microcavities exist within a continuous range of the laser detuning where the soliton power smoothly evolves over the change of detuning. At the lower boundary of the soliton existing range [yellow shaded area in Fig. 16(a)], there is an intrinsic breathing state that has an oscillatory power trace, corresponding to the normal breather soliton existence range. When the intermode interaction is taken into account, a different breathing dynamic can be clearly seen in Fig. 16(b), which increases amplitude jitter close to the bistability region in the power trace. To observe intermode breather solitons, a single cavity soliton is first obtained; then continuously tuning the pump frequency within the soliton existing range, at a specific pump detuning, the intermode breather soliton can be excited, which is indicated in the form of sidebands on the RF beat note (breathing frequency). As this kind of breather soliton derives from the intermode interaction, the breathing mode generally has a narrow bandwidth, which results in the intermode breather soliton having an overall sech2-shape spectral envelope (similar to the stationary SMCs) in the primary mode family but featuring several spikes (i.e., enhanced power in comb teeth) due to the phase matching to the cavity soliton,85 as shown in Figs. 16(c) and 16(d). So this breathing behavior can be understood as being associated with a periodic energy exchange between the solitons and a second optical mode family. As a consequence, the discovery of widely existing breather solitons significantly enriches the dissipative soliton phenomena in a microresonator, as well as contributes to understanding the soliton dynamics within the larger context of nonlinear optics.
Soliton molecules are balanced states in which attractive force caused by group velocity dispersion (GVD) of bound solitons is counteracted by the intersoliton repulsive force induced by the XPM effect.22 Figure 17(a) shows the principle of the balance of attractive and repulsive forces between distinct solitons. When a microresonator is driven by discrete pumps [Fig. 17(c)], solitons with different pulse energies can form once the pumps are stabilized in the red-detuned regime simultaneously. The relationship of repulsive force (drifts of the distinct solitons) versus the soliton temporal gap can be calculated byFig. 17(b). It is observed that the repulsive force appears when the intersoliton separation is . Therefore, when the distinct solitons have a large temporal gap, the attractive force plays a leading role and solitons get close to each other until the attractive force is balanced by the repulsive force.
Concerning experimental realization, discrete pumps are obtained by modulating a CW laser using an EOM. The frequency separation of discrete pumps is controlled by the driven RF signal. An example work is implemented in an WGM resonator with a loaded- of , as shown in Fig. 17.22 When the pumps rapidly sweep across a resonance, the recorded transmission power trace, shown in Fig. 17(d), is characterized by the double MI comb to SMC transitions. The red-shaded area is the power trace of the major microcomb, which has higher power and a broader bandwidth, and the optical spectrum for single SMC is shown in Fig. 17(f). Figure 17(g) shows the optical spectrum of minor soliton, which has a narrower spectrum bandwidth, and the transmission power trace is presented by the blue-shaded area in Fig. 17(d). Once these two solitons are bound with each other, the optical spectrum is the linear superposition as shown in Fig. 17(e). The temporal separation of bound soliton is about 500 to 800 fs, which is of the same order of individual soliton pulse width, indicating that a balance is established between the attractive and repulsive forces, resulting in the same propagation velocity in the cavity.
Soliton molecules in microcavities go beyond the frame of their predecessors in fiber lasers, which enriches the soliton physics. In terms of applications, soliton molecules might contribute to comb-based sensing and metrology by providing an additional coherent comb, as well as optical telecommunications if storing and buffering soliton-molecule-based data come true.22
Laser Cavity Solitons
SMCs can also be generated in a nested laser cavity in which a Kerr microresonator is embedded into a gain fiber cavity.21 The principle of laser cavity soliton is demonstrated in Fig. 18(a), which includes a microring cavity and a longer gain fiber cavity. The mode relationship of these two cavities is shown in Fig. 18(b), which ensures only a single fiber cavity mode in each microcavity mode to prevent supermode instability. The phases of comb lines are locked based on the intracavity FWM effect,90,91 and a typical optical spectrum of laser cavity soliton is presented in Fig. 18(c). The main gain of laser cavity soliton is obtained by stimulated radiation in the gain fiber cavity, which is different from the parametric gain of external-pumped microcomb generation schemes. Therefore, the intracavity power does not need to reach the OPO threshold, which results in laser cavity soliton formation with very low power.
Comparatively, the laser cavity soliton is background-free, which is beneficial for improving the energy conversion efficiency. According to the LLE, the energy conversion efficiency is limited to 5% for CW laser pumped single soliton. However, the conversion efficiency of laser cavity soliton can be boosted to 96% in theory, and 75% is experimentally obtained.21 Furthermore, as the lasing modes are the common modes of nested cavities, the repetition rate of cavity soliton can be simply tuned through changing the fiber cavity length (e.g., using a high-precision delay line), providing a new approach for the realization of SMC frequency locking. Meanwhile, the generation of laser cavity solitons mainly relies on the modes relationship of nested cavities, so they exhibit high robustness against environment fluctuations.
Dark Soliton Generation in the Normal-Dispersion Regime
Dark solitons (or dark pulses) are generally understood as intensity dips on a constant background, which demonstrate some unique advantages (e.g., less sensitivity to the system loss than bright solitons and more stability against the Gordon–Haus jitter in long communication lines) and have attracted increasing interest in many areas. Based on the mean-field LLE in the context of ring cavities or Fabry–Pérot interferometer with transverse spatial extent, it is found that in the time domain the dark solitons manifest themselves as low-intensity dips embedded in a high-intensity homogeneous background with a complex temporal structure, as being a particular type of solitons appearing in dissipative systems.92,93 Although the original nonlinear Schrödinger equation admits a solution in the form of bright solitons in the anomalous-dispersion regime, dark solitons are in the normal-dispersion regime.94,95 It is worth noting that mode-locking transitions do not necessarily correspond to dark or bright pulse (soliton) generation in microresontors with normal dispersion.96,97 This is in contrast to the situations for the negative-dispersion regime where all soliton forms are actually “bright solitons.” Actually, in the field of traditional mode-locked fiber lasers, it has been proved that different types of bright pulses can emit from a laser cavity in the normal-dispersion regime, including dissipative solitons with rectangular spectrum (Gaussian in time domain), Gaussian spectrum (flat-topped pulses), broadband spectrum (wave-breaking-free pulses), and noise-like pulses (low-coherence pulse clusters).98 Or even, bright and dark solitons can coexist in the same fiber laser cavity with strong normal dispersion.94 A similar phenomenon is also theoretically revealed in normal-dispersion microresonators.95 In other words, it can be considered that there does not exist a rigid “barrier” to distinguish the two states (depending on the pulse duration and duty cycle). Since rich phenomena have been discovered exhibiting distinct features from different aspects and with rather complicated excitation dynamics, there have been various prediction and explanations related to the physical origin of the observed temporal behaviors for microcombs with normal dispersion in the literature, such as “platicons” (flat-topped bright solitonic pulses),99 dark pulses,23,92 and dark solitons93,95,96 or just normal-dispersion microcombs.97 In this part, we mainly focus on the mode-locked character, rather than a strict physical clarification for this kind of pulse. For simplicity, these localized reduction structures with an intense CW background in microcavites are all referred to as “dark solitons.”
An obvious difference between the two opposite-dispersion regimes is that the anomalous region usually favors ultrashort pulse emission with time-bandwidth-product limited (chirp-free or nearly chirp-free) durations, while for the normal-dispersion regime it prefers strongly chirped waves that are far from the Fourier-transform limitation with the absence of intrinsic balancing between the nonlinearity and negative dispersion. Thus intuitively, the route to DS generation as well as its excitation dynamics will deviate from those for bright solitons in anomalous-dispersion microresonators. During the past years, several experiments with normal-dispersion resonators on diverse material platforms, including 100 and WGM resonators,101 as well as SiN microrings,97,102 emerged. Numerous trials regarding different skills concerning the microcomb formation were also conducted. For instance, as shown in Figs. 19(a) and 19(b), by utilizing backscattered light from a resonator to lock the laser to the WGM microresonator (self-injection locking method),100 a stable DS state corresponding to a manifold of short “dark” pulses with lower power compared to the background traveling inside the resonator is achieved, and the phase-locked comb shows three distinct maxima (peaks) on the spectrum envelope.101 Through numerical analysis, it is found that the position of these peaks depends on the normalized dispersion value, which is similar to the situations for the negative dispersion where the comb bandwidth and the position of the emitted dispersive wave are decided by the overall dispersion. Another example using a SiN microring is depicted in Fig. 19(c).102 The system is driven from the hyperparametric oscillation that is facilitated by the local dispersion disruptions induced by mode interactions to a mode-locked DS state over a 200-nm spectral bandwidth at a selected pump power and detuning. Interestingly, it is found that even square pulses can be generated directly with correct sets of wavelength-dependent -factor, GVD, and pump detuning [Fig. 19(d)].102 Other achievements in this field include using a dual-coupled microresonator integrated with an on-chip microheater to shift the auxiliary ring resonances via the thermo-optic effect, as shown in Figs. 19(e) and 19(f), thus permitting programmable and reliable control of mode interactions that help the comb initially generated at specified resonances to achieve repetition-rate selectable and mode-locked combs in the normal-dispersion regime.97 Furthermore, it has also been numerically proved that the third-order dispersion plays an important role in the existence and stability of dark solitons, even allowing for stable dark and bright solitons to coexist in a microcavity.95
All of this progress demonstrates that the mode-locking mechanism for normal-dispersion microcavities might have analogies to, but surely is not identical to, that in anomalous-dispersion regimes. One of the most obvious differences, compared with bright solitons observed in negative-dispersion microcavities, is that the soliton regime now favors the blue-detuned region instead of the red-shifted regime, which leads to the intracavity pump field staying on the upper branch of the bistability curve where modulational instability is generally absent.103,104 A representative work is shown in Figs. 20(a) and 20(b); a thermal-tuning method (equivalent to the traditional frequency tuning method) is employed to realize dark solitons in a SiN microring.23 The pump is gradually tuned to stably approach the resonance from the blue side (and always in the effectively blue-detuned regime with respect to the shifted resonance); the power transmission curve is depicted in Fig. 20(a) and different operation stages are observed in Fig. 20(b). Strikingly, it can be clearly seen that the MI process, which is commonly cited as an important mechanism for SMC generation in the negative-dispersion regime, is now weakened (or even disappears) in this positive-dispersion regime. This mechanism is further verified by a detailed bifurcation analysis of dark structures in the LLE with normal GVD, which predicts DS regions of existence and stability, and it suggests that the MI does not play a role in the DS existence.92 By contrast, mode coupling, which is usually considered to be detrimental as it inhibits the formation of solitons and limits the comb bandwidth in the anomalous-dispersion cavities, now acts as a contributing factor for initiation of DS generation.23,103 It is suggested that the initial comb lines are formed due to the interaction of different mode families; if resonances corresponding to different families of transverse modes approach each other in frequency, they may interact around mode crossing positions.23,104 This principle is also supported in a related work using the second-harmonic-assisted approach for DS generation in which the interaction between the fundamental and second-harmonic waves can provide a new way of phase matching for FWM in optical microresonators, effectively enabling the DS generation [Fig. 20(c)].104 One more interesting phenomenon is that, as shown in Figs. 20(d) and 20(e), at the through port bright solitons are observed, while at the drop port DSs are captured (i.e., they are reciprocal). Considering the physical nature, it is reasonable to imagine that the intracavity generation of bright pulses usually leads to generation of DSs at the output for the add-drop type microresonators. Moreover, with specific operation parameters, it is possible to transform the cavity state from the bright soliton regime to the DS state or vice versa.92 Therefore, the most important meaning of the DS research relies on such approaches providing a novel way of overcoming the dispersion limit for traditional microcombs. This is very important for effectively extending the accessible wavelength ranges, e.g., stretching to visible ranges that are essential for the stabilization of optical clocks where the atomic transitions locate but large normal material dispersion usually dominates.23
Looking back on the research of extraordinary SMCs related to rich physical phenomena (including soliton crystals, Stokes solitons, breathers, molecules, and cavity solitons, as well as dark solitons), all of these encouraging discoveries have revealed deeper insight into the dynamics and properties of this new category of laser sources for integrated photonics. As a comparison, the developing route is, interestingly and legitimately, mimicking the evolution roadmap of the mode-locked fiber lasers of previous pioneers in nonlinear optics in the last few decades (and still continuously yielding cutting-edge progresses at present105). Actually, a lot of unusual phenomena in microcombs have already been predicted or verified in a similar manner to some degree. That is, although different in material platforms and generation mechanisms, classic fiber nonlinearities can still offer a guidance or reference for microcombs, especially regarding unexplored temporal and spectral behaviors (e.g., vector solitons,106,107 wave-breaking-free pulses,108,109 optical bullets,110 or even rouge waves111,112). Meanwhile, they can inspire new fundamental research on intrinsic soliton features that are not yet considered in this area, such as the chirp parameter (or time-bandwidth-product),113 which is crucial in traditional fiber lasers for dedicated control on pulse shaping qualities114 and contributes significantly to further system optimization.
To date, various proof-of-concept experiments concerning extensive applications of SMCs have been demonstrated (Fig. 21), including massively parallel coherent communications, DCS, ultrafast distance measurements, low-noise microwave generation, optical frequency synthesizers, astrophysical spectrometer calibration, and quantum information processing. Some representative works are discussed by classification of application fields.
Coherent Optical Communications
Future demand in “big data” interconnection leads to optical communication systems with terabits to petabits per second data rates in a single fiber with hundreds of parallel wavelength-division multiplexing channels. The SMC can act as a promising candidate of multiwavelength carriers due to its favorable characteristics of frequency stability, broad band, suitable mode spacing, and narrow linewidth. Even based on a nonsoliton-state microcomb with an imperfect spectrum, Pefeifle et al.115 demonstrated coherent transmission of of data over 300 km, using 20 comb channels with spectral efficiency of under quadrature phase-shift keying modulating and polarization multiplexing. When SMCs were used, the data rate was successfully boosted to with spectral efficiency of , under the conditions of 179 channels, 50 GHz carrier spacing, 40 gigabaud rate, 16-state quadrature amplitude modulation (16-QAM), and 75-km transmitting distance.39 Higher order modulation of 64-QAM has also been achieved by employing dark SMCs.116 A record high spectral efficiency of up to was recently realized using the traditional superchannel method.117
The DCS, which is similar to Fourier transform spectroscopy, provides an excellent method for gas composition detection with outstanding features of shorter sampling time, higher optical spectrum resolution, and multicomposition detection capability. Two SMCs in the telecommunication band with slightly different repetition rates that were generated in two separate wedge disk resonators were used to build a DCS system, and the absorption spectrum of was analyzed.38 An improved approach utilizing counter-propagating solitons emitted from a single cavity was reported recently to implement a Vernier spectrometer, which provided a considerable technical simplification. The Vernier spectrometer enhanced the capability for arbitrarily tuned source measurement.118 High-performance dual-soliton-combs using two cascaded SiN microresonators with a single pump, which drastically reduces experimental complexity, have also been demonstrated.119 In the mid-infrared region, molecular transitions are much higher (typically 10 to 1000 times) than that in the visible or near-IR, and a proof-of-principle mid-infrared DCS system based on silicon microrings was successfully realized through a thermal-controlled method.120 In addition to the DCS, single- and triple-SMCs have also been proposed for atomic spectroscopy and multidimensional coherent spectroscopy, respectively.80,121
OFCs are promising as excellent coherent sources for light detection and ranging (LIDAR) systems to fulfill fast and accurate distance measurements. Using a setup similar to the DCS system, dual-comb ranging systems have been carried out recently, which opens the door to low-SWaP LIDAR systems. For example, by employing the dual counter-propagating SMCs within a single silica wedge resonator, a dual-comb laser ranging system substantiates the time-of-flight measurement with 200-nm accuracy at an averaging time of 500 ms and within a range ambiguity of 16 mm.65 Another parallel progress is achieved on a SiN dual-microcomb LIDAR system, demonstrating ultrafast distance measurements with a precision of 12 nm at averaging times of and acquisition rates of 100 MHz, even allowing for in-flight sampling of gun projectiles moving as fast as .41 Through fast chirping pump lasers in the soliton existence range, the pump frequency modulation was transferred to all spectral comb lines, which resulted in a true parallelism frequency-modulated continuous-wave LIDAR.122 SMC was also proposed for high-accuracy, long distance ranging based on a dispersive interferometry method. In a very recent experiment, a minimum Allan deviation of 27 nm was successfully achieved in an outdoor 1179 m ranging experiment.123
SMCs are promising candidates for microwave-related applications including optical atomic clocks, ultrastable microwave generation, and microwave signal processing. Early attempts of photonic-microwave links include locking a nonsoliton state microcomb to atomic Rb transitions124 and a self-referenced microcomb with a broadened spectrum locked to an atomic clock.125 Recently, more compact schemes with fully stabilized SMCs have been reported, taking a big step toward photonic integration of optical-frequency synthesis40,126 and optical atomic clocks.127 The proposed optical frequency synthesizer was verified to be capable of transferring the stability from a 10-MHz microwave clock to laser frequency within an uncertainty of .40 An updated work demonstrated that with the help of a pair of interlocked SMCs, an optical atomic clock can provide fully coherent optical division to generate a 22-GHz RF clock signal with a fractional frequency instability of .128 In addition to the photonic-microwave link, SMCs can also act as important tools for high spectral purity microwave generation129,130 and true time delays.131–135
Benefitting from the significant cavity enhancement, microresonators can offer attractive integrated platforms for single photon or entangled quantum state generation.136 Broadband quantum frequency comb has been realized in a high-refractive-index glass microring resonator via a high-efficiency spontaneous FWM effect at a relatively low pump power.137 Based on the quantum microcomb technique, more breakthroughs have been achieved, including the first integrated multiphoton entanglement137 and high-dimensional entangled quantum states.138 Compared with the quantum microcomb relying on the spontaneous parametric process, SMCs generated through the stimulated FWM effect can also play important roles in quantum optics. For example, a novel quantum key distribution system by demultiplexing the coherent microcomb lines was proposed very recently, showing the potential of the Gbps secret key rate.139 Considering other progress made in this field by ultilizing microcombs,140–146 it is reasonable to imagine that the microcavities can find more important applications worth extensively exploring in quantum optics.
Summary and Outlook
The experimental realization of SMCs represents the successful convergence of materials science, physics, and engineering techniques. SMCs have been regarded as an outstanding candidate in the exploration of next generation of optical sources due to the unprecedented advantages of lower SWaP (size, weight, and power), higher repetition rate as well as high coherence across the spectral coverage.147 Until now, the challenge of SMC generation has been gradually overcome using a variety of advanced experimental techniques, from the universal power-kicking method to the “forward and backward tuning” scheme for deterministic single SMC generation. Meanwhile, the dynamics of cavity soliton physics are substantially understood along with discovery of various extraordinary solitons and the rich nonlinear effects of dispersive waves, mode-crossing effect, and Raman self-frequency shift.
Although SMC-based applications present unprecedented performance improvements in many fields, generally they are still at the stage of proof-of-concept in laboratories at present. Considering engineering applications, the developments of SMCs (should) favor the tendency toward automatic generation, as well as higher integration density and higher energy conversion efficiency. The main challenge of automatic or programmable-controlled SMC generation comes from the ultrashort thermal lifetime of a microresonator, which is beyond the capacity of practical instruments for timely judgment on the soliton state through spectrum recognition. Fortunately, some advanced tuning speed independent schemes (e.g., the auxiliary-laser-assistant method and photorefractive effect in microresonators) have been raised, paving a potential way for automatic SMC generation. Monolithic/hybrid integration is another key technique to promote applications of SMCs. The core issue of fully integrated SMC sources is improving the -factor of microresonators. The propagation loss in microcavities is still several orders of magnitude higher than that of standard optical fibers, so there is still great potential to further lower the loss through optimizing the fabrication process. Actually, many achievements have been obtained via improved microfabrication techniques. For example, environmentally stable silicon oxynitride () with a even higher than 100 million (two orders higher than the previous level) has been successfully realized; it permits a submicrowatt threshold for microcomb generation148–150. In addition, hybrid-integrated SMC sources through butt-coupling gain block or LD to SiN chips have been reported recently.52,72 Furthermore, higher energy conversion efficiency151,152 of SMC sources is demanded for reducing power consumption. Currently, researchers are purchasing higher conversion efficiency through different routes, including the self-injection method,33 perfect soliton crystals,83 dark pulse,23 and coupled-ring geometry,91 as well as nearly 100% via a pump recycling method.152
It should be noted that a majority of reported SMCs are operating at communication bands. However, there are still great challenges for the generation of visible and mid-infrared SMCs, which would enable broad applications in molecular spectroscopy and chemical/biological sensing. The bandwidth of visible SMC28 is rather limited, and no mid-infrared single-SMC has yet been reported. Therefore, more efforts to improve the performance of SMCs on existing platforms and explore new materials are expected for vastly extending the spectral coverage to reach their full potential.153,154 Furthermore, microcavities are yet to be thoroughly developed and recognized by revealing more characteristics in the space and time domains, so as to identify their intrinsic essences and ultimate capabilities.155–158 Considering all of these breakthroughs, it is highly likely that SMCs will become revolutionary integrated optical sources with ultralow SWaP in a wide range of future applications.
This work was supported by the National Natural Science Foundation of China (Grant Nos. 61635013 and 61675231), the Strategic Priority Research Program of the Chinese Academy of Sciences (Grant No. XDB24030600), and the Youth Innovation Promotion Association of CAS (Grant No. 2016353). The authors thank Z. Z. Lu, X. Y. Wang, and B. L. Zhao for valuable discussions and contributions to document proofreading.
Weiqiang Wang is an associate professor at the State Key Laboratory of Transient Optics and Photonics of Xi’an Institute of Optics and Precision Mechanics (XIOPM) of the Chinese Academy of Sciences (CAS). His research has focused on planar waveguide and devices, semiconductor lasers, Kerr optical frequency comb, and related applications.
Leiran Wang received his PhD from the University of CAS in 2011. At present, he is a professor at the State Key Laboratory of Transient Optics and Photonics of XIOPM and at the School of Future Technology of the University of CAS. His current research interests include integrated photonics and ultrafast nonlinear optics.