1 November 2010 Design, manufacturing, and qualification of an uncooled microbolometer focal plane array-based radiometric package for space applications
Author Affiliations +
Abstract
Uncooled microbolometer detectors are well suited for space applications due to their low power consumption while still exhibiting adequate performance. Furthermore, the spectral range of their response could be tuned from the mid- to the far-infrared to meet different mission requirements. If radiometric measurements are required, the radiometric error induced by variation of the temperature of the detector environment must be minimized. In a radiometric package, the detector environment is thermally stabilized by means of a temperature-controlled radiation shield. The radiation shield must be designed to prevent stray radiation from reaching the detector. A radiometric packaging technology for uncooled microbolometer FPAs is presented. The selection of materials is discussed and the final choices presented based on thermal simulations and experimental data. The radiometric stability with respect to stray light and variation of the temperature of the environment as well as the different noise components studied by means of the Allan variance are presented. It is also shown that the device successfully passed the prescribed environmental tests without degradation of performance.
©(2010) Society of Photo-Optical Instrumentation Engineers (SPIE)
Sonia M. García-Blanco, Patrice Côté, Melanie R. Leclerc, Nathalie Blanchard, Yan Desroches, Jean-Sol Caron, Linh Ngo Phong, François Châteauneuf, and Timothy D. Pope "Design, manufacturing, and qualification of an uncooled microbolometer focal plane array-based radiometric package for space applications," Journal of Micro/Nanolithography, MEMS, and MOEMS 9(4), 041105 (1 November 2010). https://doi.org/10.1117/1.3492413
Published: 1 November 2010
Lens.org Logo
CITATIONS
Cited by 6 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
Back to Top