Methodology for evaluating the information distribution in small angle scattering from periodic nanostructures

Daniel F. Sunday; R. Joseph Kline

doi:10.1117/1.JMM.17.4.044002

3 November 2018 Methodology for evaluating the information distribution in small angle scattering from periodic nanostructures

Daniel F. Sunday, R. Joseph Kline

Author Affiliations +

Journal of Micro/Nanolithography, MEMS, and MOEMS, Vol. 17, Issue 4, 044002 (November 2018). https://doi.org/10.1117/1.JMM.17.4.044002

Abstract

Optimizing the extraction of information from x-ray measurements while minimizing exposure time is an important area of research in a variety of fields. The semiconductor industry is reaching a point where the traditional optical metrologies need to be augmented in order to better resolve the critical dimensions of structures with feature sizes below 10 nm. Critical dimension small angle x-ray scattering (CDSAXS) is one measurement technique that is capable of characterizing detailed features of periodic nanostructures. As currently implemented, the measurement utilizes the combined scattering from up to 60 different angles. Reducing the number of angles would dramatically improve the feasibility of CDSAXS for implementation in a fabrication setting, but currently there are no clear guidelines as to which angles provide the most information to minimize the uncertainty in the shape of the target structure while maximizing the throughput. In order to develop guidelines for optimizing the angle selection, simulation studies were conducted on a wide variety of structures with subsets of the full angular range to identify which angles minimized the overall shape uncertainty. Analyzing sets of two angle pairs (including all combinations between 0 deg and 60 deg) provides guidance on which angles best constrain the samples. For select samples, higher numbers of angles were included to explore the impact of additional information on the model uncertainty. In general, low angles (<3 deg) best contributed to minimizing the line-width uncertainty, while higher angles near high curvature regions of the scattering profile best constrained the height of the structure. The minimum uncertainty was generally achieved with combinations of the two. This simulation approach can be used to minimize the number of angles measured on real samples and significantly reduce the measurement time.

Citation Download Citation

Daniel F. Sunday and R. Joseph Kline "Methodology for evaluating the information distribution in small angle scattering from periodic nanostructures," Journal of Micro/Nanolithography, MEMS, and MOEMS 17(4), 044002 (3 November 2018). https://doi.org/10.1117/1.JMM.17.4.044002

Received: 26 June 2018; Accepted: 12 October 2018; Published: 3 November 2018

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available