Thick-membrane-operated radio frequency switches with wafer-level package using gold compressive bonding

Jongseok Kim; Sangwook Kwan; Youngtack Hong; Insang Song; Hee-Moon Jeong; Hyung Choi; Byeong-Kwon Ju

doi:10.1117/1.3238545

1 October 2009 Thick-membrane-operated radio frequency switches with wafer-level package using gold compressive bonding

Jongseok Kim, Sangwook Kwan, Youngtack Hong, Insang Song, Hee-Moon Jeong, Hyung Choi, Byeong-Kwon Ju

Journal of Micro/Nanolithography, MEMS, and MOEMS, Vol. 8, Issue 4, 043020 (October 2009). https://doi.org/10.1117/1.3238545

Abstract

An electrostatically actuated radio frequency (rf) switch is fabricated using a thick silicon membrane, and the device is packaged using a high resistivity silicon cap wafer with a gold (Au) thermocompressive bonding method. To achieve an rf switch that can operate at low voltage, a thick membrane with a pivot under the membrane is used. This design makes it possible to maintain the very small gap between the electrodes and the membrane without bending. A cavity with a pivot-patterned silicon wafer and a coplanar waveguide (CPW) signal-line-formed glass wafer is bonded using an anodic bonding method. After a mechanical polishing process, a deep reactive ion etcher is used to fabricate the membrane structure with a spring and a spring bar. To package the fabricated rf switch, an Au thermocompressive bonding process is used. A 1-µm-thick sputtered Au layer is used as intermediate bonding material. The bonding temperature and pressure are 350 °C and 63 MPa, respectively, and the time duration of the bonding is set to 30 min. The electrodes of the switch and the electrical contact pads on the cap wafers are interconnected via a hole and a sputtered Au metal layer. The total size of the complete packaged rf switch is 2.2 × 1.85 mm, and its rf characteristics have been measured using a Hewlett−Packard (HP) 8510C network analyzer. The measured driving voltage is approximately 16 V, the isolation is approximately −38.4 dB, and the insertion loss is approximately −0.43 dB at 2 GHz.

©(2009) Society of Photo-Optical Instrumentation Engineers (SPIE)

Citation Download Citation

Jongseok Kim, Sangwook Kwan, Youngtack Hong, Insang Song, Hee-Moon Jeong, Hyung Choi, and Byeong-Kwon Ju "Thick-membrane-operated radio frequency switches with wafer-level package using gold compressive bonding," Journal of Micro/Nanolithography, MEMS, and MOEMS 8(4), 043020 (1 October 2009). https://doi.org/10.1117/1.3238545

Published: 1 October 2009

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available

Members: $24.00

Non-members: $28.00 ADD TO CART

JOURNAL ARTICLE
6 PAGES

DOWNLOAD PAPER SAVE TO MY LIBRARY

GET CITATION

RIGHTS & PERMISSIONS

Get copyright permission Get copyright permission on Copyright Marketplace

KEYWORDS

Switches

Semiconducting wafers

Silicon

Wafer bonding

Gold

Electrodes

Photoresist materials

Show All Keywords

Keywords/Phrases

Search In:

Publication Years