1 February 1977 Preprocessing X-Ray Transmission Data in CT Scanning
Michael J. Dennis, Robert G. Waggener, William D. McDavid, William H. Payne, Victor J. Sank
Author Affiliations +
Abstract
While the reconstruction algorithm utilized in computerized tomography (CT) is important, the overall performance of the system is limited by the quality of the measured transmission data which is used as a basis for the reconstruction process. If the projection values derived from the measured data do not adequately represent the line integrals of the linear attenuation coefficients within the slice being scanned, even a perfect reconstructruction algorithm will give rise to a distorted image. Phenomena which tend to deteriorate the quality of the measured data, and hence the final image, include the effective finite dimensions of the scanning aperture, distortions introduced by the detector system such as afterglow, and nonlinearities related to the spectral distribution of x-ray photons used in scanning. Computer methods of preprocessing the x-ray transmission data to minimize these distortions are discussed and illustrated.
Michael J. Dennis, Robert G. Waggener, William D. McDavid, William H. Payne, and Victor J. Sank "Preprocessing X-Ray Transmission Data in CT Scanning," Optical Engineering 16(1), 160106 (1 February 1977). https://doi.org/10.1117/12.7972069
Published: 1 February 1977
Lens.org Logo
CITATIONS
Cited by 2 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
X-rays

Reconstruction algorithms

X-ray computed tomography

Computed tomography

Image quality

Quality measurement

Algorithm development

Back to Top