1 April 2009 Optical pulse-burst position modulation for antenna beam forming
Amir Shemer, Zeev Zalevsky, Shlomo Zach
Author Affiliations +
Abstract
We present a realization of an optically controlled pulse-burst position modulator to be used for a radio-frequency photonic circuit aiming to produce beam forming for a Radar-transmitting antenna. The configuration uses a set of fiber ring resonators that contain erbium-doped fiber amplifiers. By controlling the pumping in each loop, the gain of the doped fibers is changed, which results with a change in the resonators' finesses. In the end of each optical path, the optical signal is sampled and converted to an electronic signal while an electronic subtraction is performed between the outputs of the two resonators. Because each resonator has different and controlled finesse, the subtraction results in an output pulse burst with varied position.
©(2009) Society of Photo-Optical Instrumentation Engineers (SPIE)
Amir Shemer, Zeev Zalevsky, and Shlomo Zach "Optical pulse-burst position modulation for antenna beam forming," Optical Engineering 48(4), 045003 (1 April 2009). https://doi.org/10.1117/1.3120283
Published: 1 April 2009
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Modulation

Resonators

Antennas

Optical amplifiers

Phased array optics

Radio optics

Optical engineering

RELATED CONTENT


Back to Top