1 October 2011 New structural design of passive optical array waveguide grating-wavelength division multiplexing to upgrade the multiplexing/demultiplexing characteristic
Ali Salehi Vanani, Rahim Ghayour
Author Affiliations +
Abstract
In this paper an 8×1 array waveguide grating-wavelength division multiplexing (AWG-WDM) is optimized for its applications in WDM networks, with the wavelength selective switch as the multiplexer/demultiplexer. With the new method of optimization proposed in this work, a higher bandwidth and lower crosstalk and insertion loss are achieved. The procedure of optimization for finding the best parameters such as the waveguide separation at the output circle, a new structure for Rowland circle, a new structure for the tapered waveguide, and displacement of the foci of the Rowland circle from its standard construction are presented and the results are discussed. We designed a silica-based 8 channel AWG-WDM with the channel spacing of 1.6 nm and the central wavelength of 1550 nm. The occupied area of the phased arrayed waveguides is 2.2 × 1.3 cm2, and the total device size is 3.6 × 1.28 cm2. The 3dB bandwidth of AWG-WDM is 3.31 × 10−4 μm. The insertion loss of the side channels (1 or 8) is about 2.65 dB for this design, where it is about 3.77 dB for the device based on the standard Rowland circle structure.
©(2011) Society of Photo-Optical Instrumentation Engineers (SPIE)
Ali Salehi Vanani and Rahim Ghayour "New structural design of passive optical array waveguide grating-wavelength division multiplexing to upgrade the multiplexing/demultiplexing characteristic," Optical Engineering 50(10), 105004 (1 October 2011). https://doi.org/10.1117/1.3638067
Published: 1 October 2011
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Waveguides

Structural design

Optical arrays

Wavelength division multiplexing

Dense wavelength division multiplexing

Optical engineering

Beam propagation method

RELATED CONTENT

Mode conversion in Y-branch waveguides
Proceedings of SPIE (December 01 1991)

Back to Top