10 January 2014 Bragg grating–based fiber laser vibration sensing system with novel phase detection
Author Affiliations +
Abstract
We characterized the dynamic response of a Bragg grating-based fiber laser sensing system. The sensing system comprises of a narrow line width fiber laser based on π -phase-shifted fiber Bragg grating formed in an active fiber, an unbalanced fiber Michelson interferometer (FMI), which performs wavelength-to-phase mapping, and a phase detection algorithm, which acquires the phase change from the interferometric output signal. The novel phase detection algorithm is developed based on the combination of the two traditional phase generated carrier algorithms: differential-cross-multiplying and arctangent algorithms, and possesses the advantages of the two algorithms. The modulation depth fluctuation of the carrier does not affect the performance of the sensing system. A relatively high side mode suppression ratio of above 50 dB has been achieved within a wide range of carrier amplitude from 1.6 to 5.0 V which correspond to the modulation depth from 1.314 to 4.106 rad. The linearity is 99.082% for the relationship between the power spectral density (dBm/Hz ) of the detected signal and the amplitude (mv) of the test signal. The unbalanced FMI is used to eliminate the polarization effect.
© 2014 Society of Photo-Optical Instrumentation Engineers (SPIE) 0091-3286/2014/$25.00 © 2014 SPIE
Xiufeng Yang, Zhihao Chen, Ju Teng Teo, and Soon Huat Ng "Bragg grating–based fiber laser vibration sensing system with novel phase detection," Optical Engineering 53(1), 016109 (10 January 2014). https://doi.org/10.1117/1.OE.53.1.016109
Published: 10 January 2014
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Fiber lasers

Signal detection

Sensors

Sensing systems

Detection and tracking algorithms

Phase shift keying

Fiber Bragg gratings

Back to Top