Nonisothermal glass molding for the cost-efficient production of precision freeform optics

Anh-Tuan Vu; Holger Kreilkamp; Olaf Dambon; Fritz Klocke

doi:10.1117/1.OE.55.7.071207

5 May 2016 Nonisothermal glass molding for the cost-efficient production of precision freeform optics

Anh-Tuan Vu, Holger Kreilkamp, Olaf Dambon, Fritz Klocke

Author Affiliations +

Optical Engineering, Vol. 55, Issue 7, 071207 (May 2016). https://doi.org/10.1117/1.OE.55.7.071207

Abstract

Glass molding has become a key replication-based technology to satisfy intensively growing demands of complex precision optics in the today’s photonic market. However, the state-of-the-art replicative technologies are still limited, mainly due to their insufficiency to meet the requirements of mass production. This paper introduces a newly developed nonisothermal glass molding in which a complex-shaped optic is produced in a very short process cycle. The innovative molding technology promises a cost-efficient production because of increased mold lifetime, less energy consumption, and high throughput from a fast process chain. At the early stage of the process development, the research focuses on an integration of finite element simulation into the process chain to reduce time and labor-intensive cost. By virtue of numerical modeling, defects including chill ripples and glass sticking in the nonisothermal molding process can be predicted and the consequent effects are avoided. In addition, the influences of process parameters and glass preforms on the surface quality, form accuracy, and residual stress are discussed. A series of experiments was carried out to validate the simulation results. The successful modeling, therefore, provides a systematic strategy for glass preform design, mold compensation, and optimization of the process parameters. In conclusion, the integration of simulation into the entire nonisothermal glass molding process chain will significantly increase the manufacturing efficiency as well as reduce the time-to-market for the mass production of complex precision yet low-cost glass optics.

Citation Download Citation

Anh-Tuan Vu, Holger Kreilkamp, Olaf Dambon, and Fritz Klocke "Nonisothermal glass molding for the cost-efficient production of precision freeform optics," Optical Engineering 55(7), 071207 (5 May 2016). https://doi.org/10.1117/1.OE.55.7.071207

Published: 5 May 2016

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available