11 February 2017 Grouping design method of catadioptric projection objective for deep ultraviolet lithography
Author Affiliations +
Abstract
Choosing an adequate initial design for optimization plays an important role in obtaining high-quality deep ultraviolet (DUV) lithographic objectives. In this paper, the grouping design method is extended to acquire initial configurations of catadioptric projection objective for DUV lithography. In this method, an objective system is first divided into several lens groups. The initial configuration of each lens group is then determined by adjusting and optimizing existing lens design according to respective design requirements. Finally, the lens groups are connected into a feasible initial objective system. Grouping design allocates the complexity of designing a whole system to each of the lens groups, which significantly simplifies the design process. A two-mirror design form serves as an example for illustrating the grouping design principles to this type of system. In addition, it is demonstrated that different initial designs can be generated by changing the design form of each individual lens group.
© 2017 Society of Photo-Optical Instrumentation Engineers (SPIE) 0091-3286/2017/$25.00 © 2017 SPIE
Zhen Cao, Yanqiu Li, and Shanshan Mao "Grouping design method of catadioptric projection objective for deep ultraviolet lithography," Optical Engineering 56(2), 025102 (11 February 2017). https://doi.org/10.1117/1.OE.56.2.025102
Received: 5 October 2016; Accepted: 4 January 2017; Published: 11 February 2017
Lens.org Logo
CITATIONS
Cited by 4 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Objectives

Deep ultraviolet

Lithography

Combined lens-mirror systems

Mirrors

Lens design

Lithium

RELATED CONTENT

Overall Design On Optical Lens Data Base (OLDB)
Proceedings of SPIE (December 22 1989)
Beginning the design of a UV microscope objective
Proceedings of SPIE (September 16 1992)
Practical guide to saddle-point construction in lens design
Proceedings of SPIE (September 18 2007)
Trends in optical design of projection lenses for UV and...
Proceedings of SPIE (November 08 2000)

Back to Top