A new type of double cladding optical fiber has been demonstrated utilizing a GRIN MM inner cladding and an SM core to allow DTS, DSTS and DAS within a single optical fiber. DAS and DTS results are experimentally proven possible with this novel fiber design.
We present the inscription of a fibre Bragg grating (FBG) array in non-transparent carbon coated optical fibre using the direct write, plane-by-plane femtosecond laser inscription method. Our application is targeting high temperature measurements in harsh environments. The grating spectra were characterized in reflection and the temperature response of the array was measured up to 160°C.
An ytterbium (Yb) doped polarizing fiber is demonstrated. The fiber offers the opportunity to build all-fiber lasers with single polarization output and without the need for free-space polarizing components. Traditional single polarization fiber lasers utilize polarization-maintaining (PM) gain fiber with a single polarization stimulation signal. Whilst this results in an approximation to a single polarization laser, the spontaneous emission from the unstimulated polarization state limits the polarization extinction ratio (PER). The PER is further limited as the stimulated signal is prone to crosstalk. Furthermore, controlling amplitude modulation of the stimulated signal is critical for maximizing the peak power of an optical pulse, particularly for high energy lasers. If light is allowed to leak in to the unstimulated axis it will travel at a different velocity to the stimulated axis and can cross-couple back into the signal axis, creating an interference effect which leads to amplitude modulation on the signal pulse. Single-polarization Yb-doped fiber ensures that light on the fast axis is constantly attenuated; ensuring that light on the unstimulated axis cannot propagate and thus cannot degrade the PER or create amplitude modulation. In this paper we report on, to the best of our knowledge, the first demonstration of a single polarization Yb-doped bowtie optical fiber manufactured using a combination of Modified Chemical Vapor Deposition (MCVD) and rare-earth solution doping technology. The fiber has a single-polarization window of 80nm at the operating wavelength of 1060nm and a PER of >18dB. The fabrication and characterization of the fiber is reported.
A range of new specialty optical fibers have been developed for fiber sensors including twin hole/side hole fibers for pressure sensing, multicore fibers for 3D shape sensing and DTS/DSS sensing and polarizing, doped polarizing and spun polarizing fibers for polarimetric sensors.
Fiber optic gyroscopes (FOGs) are being used within increasingly severe environments, requiring operational temperatures in excess of the standard operating range for FOGs. Applications requiring these higher temperatures include: directional drilling of wells in oil and gas fields, space applications and military FOG applications. This paper will describe the relative merits of two high temperature acrylate coatings for an optical fiber designed for a FOG in such operating environments. Results for two high temperature acrylates are presented, tested in a 200m length of loose wound fiber, coiled and supported at 75mm diameter, in line with TIA/EIA-455-192 (FOTP-192). It can be seen that both coating types give very good polarization extinction ratio (PER) performance at high temperature up to 180oC, with better performance shown by one coating type on the low temperature side, since it does not harden to the same extent below 0oC. The long term thermal exposure effects will be discussed and experimental results presented which include testing the PER performance over temperature both before and after an extended period of high temperature endurance. This will demonstrate the relative merits of different styles of coatings. From the PER performance, the h-parameter of the fiber can be calculated and hence the preferred coating type selected and recommended for the customer operating environment.
We report on the rapid prototyping platform, developed at Fibercore, for producing spun multicore fiber (MCF) which maintains the high-specification and quality of a large-scale manufacturing process adding the versatility to fully customize fiber for specific applications. Such MCF has been produced by using an ultrasonic drill to accurately position the core holes in the cladding glass, achieving <0.4µm accuracy in fiber. Cross-talk between cores has been minimized by implementing high numerical aperture cores of 0.20, with levels less than -55dB over 400m. Additionally, the high level of germanium doping also allows fiber Bragg gratings (FBGs) to be written into each core without the need for hydrogen loading. Finally, in order to enable distinction between any potential twist and strain in the fiber from the bend under measurement, a permanent twist has been introduced in the fiber by spinning the preform whilst it is being drawn. The manufacturing cycle time for the fiber is 8 days, allowing rapid prototyping and repeat development cycles to be tested over a short period of time when creating new fiber designs.
The design of an optical fiber to give optimized sensing and lifetime performance for downhole fiber optic seismic sensors is presented. The SM1500SC(7/80)P is designed with an 80μm cladding diameter, pure silica core, high numerical aperture, high cut off wavelength and a polyimide coating to achieve outstanding performance when used in a coiled deployment state and operating in high temperature and hydrogen rich environments.
Fibercore have developed AstroGainTM fiber optimized for multichannel amplifiers used in optical satellite
communications and control. The fiber has been designed to take full advantage of the photo-annealing effect that results
from pumping in the 980nm region. The proprietary trivalent structure of the core matrix allows optimum recovery
following radiation damage to the fiber, whilst also providing a market leading Erbium Doped Fiber Amplifier (EDFA)
efficiency. Direct measurements have been taken of amplifier efficiency in a multichannel assembly, which show an
effective photo-annealing recovery of up to 100% of the radiation induced attenuation through excitation of point
defects.
Acrylate and polyimide coatings are found to have a suitable modulus for micro-seismic sensors whilst carbon coatings are too hard and inelastic for reliable use in this application. Fiber cladding designs can be optimized for mechanical reliability by using 80μm or 50μm cladding diameters and the numerical aperture (NA) increased to give low bend losses. To reduce splice losses, a bridging fiber has been developed, capable of reducing splice losses between telecoms fibers and reduced cladding diameter high NA sensor fibers by <50%.
Fibre pulsed lasers are increasingly being adopted as the laser of choice in a number of industrial applications, such as micromachining, drilling and marking. In peak-power-driven applications, such as marking, it is essential to retain high peak powers (in excess of 2.5 to 5 kW) at high repetition rates in order to achieve faster character marking and increased throughput.
Long period gratings (LPGs) were written into a D-shaped optical fibre, which has an elliptical core with a W-shaped refractive index profile. The LPG's attenuation bands were found to be sensitive to the polarisation of the interrogating light with a spectral separation of about 15nm between the two orthogonal polarisation states. In addition, two spectrally overlapping attenuation bands corresponding to orthogonal polarisation states were observed; modelling successfully reproduced this spectral feature. The spectral sensitivity of both orthogonal states was experimentally measured with respect to temperature, surrounding refractive index, and directional bending. These LPG devices produced blue and red wavelength shifts of the stop-bands due to bending in different directions. The measured spectral sensitivities to curvatures, dλ/dR, ranged from -3.56nm m to +6.51nm m. The results obtained with these LPGs suggest that this type of fibre may be useful as a shape/bend sensor. It was also demonstrated that the neighbouring bands could be used to discriminate between temperature and bending and that overlapping orthogonal polarisation attenuation bands can be used to minimise error associated with polarisation.
A high survivability fibre sensor network is presented which has applications in smart structures. Linear sensor arrays suffer from the weakness that a fracture in the array will cause the loss of information from all sensors beyond the fracture. This scheme illustrates a method that is capable of withstanding damage with little or no effect to the data collection efficiency.
Four different wavelength FBGs were fabricated in single-mode optical fibre and spliced to two 50:50 couplers. The reflected signal from the sensor network was observed on an optical spectrum analyser.
Points along the network were attenuated by 100% to simulate a break. The attenuation of two points on the arms showed little effect to the reflection spectrum. Attenuation to four other points showed the loss of the reflection from only one grating whilst maintaining the signals from the remaining gratings. This compares favourably to a standard fibre sensor array that would lose one or more gratings, depending on the point of attenuation.
Such a system is highly desirable in rough operating environments such as found in the military or in heavy industry. The system introduces a level of redundancy without the expensive need of duplication. Other techniques involving switches or higher multiplexed couplers may be used but they present their own disadvantages. Optical switches are expensive and not particularly rugged and the higher multiplexed coupler technique has a power penalty as the power is split over a larger number of arms.
In this paper we review the sensing features of long period Bragg gratings and report on studies aimed at optimizing the sensitivities to various measurands by using different fiber geometries.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.