This paper addresses the difficulties in achieving full-field and real-time measurement of the plasma temperature field evolution process produced by the electric explosion of metal bridge foils, both domestically and internationally. The interferometric method is adopted to measure the plasma temperature field evolution process. This method is widely used in industrial applications because it is highly efficient, high in precision, and can achieve dynamic real-time full-field measurement. Firstly, an experimental laser interferometer measurement system is established based on the Mach-Zehnder interferometric measurement system. Different physical images of the plasma at different times are obtained through experiments. The changes in the interference pattern generated in the plasma are analyzed to obtain the refractive index distribution of the plasma. A model for the refractive index and plasma temperature distribution is then established. The rationality and applicability of this model are theoretically analyzed and discussed, from which the temperature of the plasma produced after the metal bridge foil electric explosion can be deduced. The experimental results show that during the metal bridge foil electric explosion, the highest temperature in the entire flow field concentrates in the center of the plasma, reaching up to 7000K. There are also multiple temperature gradients, which remain continuously between 280 and 8000K.
Based on the photon Doppler velocimetry technology, this paper studies high-speed targets' three-dimensional (3D) velocimetry technology, reproduces the movement trajectory of high-speed targets through 3D coordinates and broadens the photon Doppler velocimetry technology application scope. First, design the multiplexed photonic Doppler velocimetry optical path structure and analyze the multiplexed photonic Doppler velocimetry principle. Then, the target 3D velocity extraction method is studied, including the fiber optic probe's spatial arrangement and the calculated method of target motion trajectory. Finally, the detection sensitivity of velocity in the direction of the 3D coordinate axis is analyzed. In order to verify the reliability of 3D velocimetry technology, the paper is described in two parts: software simulation and experiment. MATLAB is used to simulate the principle of 3D velocimetry technology. The simulation results show that 3D velocimetry technology can be realized by processing Doppler frequency shift voltage signals. In the experimental part, the high-speed target is detected through fixed-angle optical fiber probes, and four sets of Doppler frequency shift voltage signals are collected. After data processing, the target's 3D velocity is extracted, and the target's motion trajectory is reproduced. Therefore, this paper provides an idea for reproducing the target's motion trajectory by obtaining the high-speed target's 3D velocity.
When detecting ultrahigh speed micro targets, because the photon Doppler signal will be seriously interfered with by high-frequency noise, it is difficult to accurately extract the beat frequency information, resulting in serious speed demodulation error. Therefore, we propose a beat frequency extraction method for high-speed and high-noise Doppler signals based on double correction, which can accurately correct the beat frequency signals of high-frequency noise interference. First, the ratio correction method is used for the first spectrum correction to screen out the normalized spectrum of high-frequency noise interference; then, according to the degree of noise interference, the energy barycenter correction method or linear interpolation method is used for the second spectrum correction. Numerical simulation results show that this method can reduce the spectral error by 1.6% to 2.1%. We used this method to process the Doppler signal from the detonation small flyer experiment in Initiating explosive device testing. The results show that it can reduce the beat frequency error by 1.83 times at most under high-frequency noise interfered, equivalent to the instantaneous velocity error of 1955 m/s can be decreased after velocity demodulation. Therefore, the beat frequency extraction method based on double correction has good noise resistance and reliability. We corrected the different regions’ frequency spectrums according to the noise interference intensity, which provides an idea for the beat frequency extraction of high-speed and high-noise Doppler signals.
As the supporting experimental platform of the Xi'an Technological University education reform experimental class, “optical technological innovation experimental platform” integrated the design and comprehensive experiments of the optical multi-class courses. On the basis of summing up the past two years teaching experience, platform pilot projects were improve. It has played a good role by making the use of an open teaching model in the cultivating engineering innovation spirit and scientific thinking of the students.
With the increasing number of the graduate students, many of them have some troubles in job finding. This situation make a huge pressure on the senior students and loss them the interesting in study. This work investigate the reasons by questionnaire survey, panel discussion, interview, etc. to achieve the factors influence their learning interesting. The main reason of students do not have the motivation on study is that they do not understand the development and competition of photoelectric specialty, lack of innovation and entrepreneurship training, hysteresis of the learning knowledge and practical application. Finally, the paper gives some suggestions through teaching reform on how to improve students' learning enthusiasm. This work will contribute to the teaching and training of senior undergraduate students of optoelectronics specialty.
Diamond-like carbon (DLC) films have attracted much attention because of their excellent performance; however, the low anti-laser damage ability of such films seriously restricts their applicability. To overcome this problem, applying the bias field to the DLC film could slow down the DLC film graphitization process and improve the LIDT of the DLC film. Results showed that the longitudinal electric field could decrease the sp3 hybridization to sp2 hybridization, prevent the formation of sp2 clusters. in this study, Unbalanced magnetron sputtering (UBMS) was used to deposit a diamond-like carbon (DLC) film on Si substrates. The refractive index and extinction coefficient of the DLC films were measured using elliptical polarization spectrometer. The transmittance and the surface roughness of DLC films were examined using optical microscopy, SEM, AFM and Raman spectroscopy. Ti electrodes were deposited on DLC films directly, forming a transverse and longitudinal bias field on films’ surfaces. The 3D electrodes morphology of the DLC film was observed. The electrode thickness was measured by a white-light interferometer, and the average thickness of the electrodes was 325.90 nm. The surface roughness of the electrodes was tested using the Talysurf CCI 2000 noncontact surface-measuring instrument, and the average roughness of the electrodes was 0.50 nm. The electrodes have good Ohmic contact and little thermal stress, and it can be used to form a parallel electric field.
In the full-color, high contrast, more accurate color rendition technology, High-Definition (HD) color display requires to
increase the transmissivity of red green blue (RGB) light of ordinary white light and cut-off others in depth. The
ordinarily used discrete tricolor light filter has shortcomings such as energy lose and polarization aberration. In this paper,
a new tricolor light filter was designed and prepared based on thin film technology. The center wavelengths of the
tricolor light filter were determined to be λR=700.0nm, λG=546.1nm and λB=435.8nm, the results showed that the
transmissivity of the filter is less than 7% in cut-off region, and the average transmissivity is greater than 91% in pass
band region. The tricolor light filter can simplify the preparation process, save the coats and increase the transmission
property.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.