This will count as one of your downloads.
You will have access to both the presentation and article (if available).
This paper describes the characterization of the FAME system (freeform active mirror experiment). The system consists of a thin hydroformed face sheet that is produced to be close to the required surface shape, a highly controllable active array that provides support and the ability to set local curvature of the optical surface and the actuator layout with control electronics that drives the active array.
A detailed characterisation of the fully-assembled freeform mirror was carried out with the physical and optical properties determined by coordinate measurements (CMM), laser scanning, spherometry and Fizeau interferometry. The numerical model of the mirror was refined to match the as-built features and to predict the performance more accurately.
Each of the 18 actuators was tested individually and the results allow the generation of look-up tables providing the force on the mirror for each actuator setting. The actuators were modelled with finite element analysis and compared to the detailed measurements to develop a closed-loop system simulation. After assembling the actuators in an array, the mirror surface was measured again using interferometry. The influence functions and Eigen-modes were also determined by interferometry and compared to the FEA results.
We present an overview of the design, which includes suitable actuators for wavefront correction, petal deployment mechanisms and lightweight mirror technologies. Preliminary testing results from manufactured lightweight mirror samples will also be summarised.
A 3D printed version of the actuator is currently being used at the ATC to deform a mirror but it has several advantages that may make it suitable to other applications. The actuator is cheap to produce whilst obtaining a high accuracy and repeatability. The actuator design would be suitable for applications requiring large numbers of actuators with high precision.
Due to the opening of a new parameter space in optical design, Freeform Optics are a revolution in imaging systems for a broad range of applications from high tech cameras to astronomy, via earth observation systems, drones and defense. Freeform mirrors are defined by a non-rotational symmetry of the surface shape, and the fact that the surface shape cannot be simply described by conicoids extensions, or off-axis conicoids. An extreme freeform surface is a significantly challenging optical surface, especially for UV/VIS/NIR diffraction limited instruments.
The aim of the FAME effort is to use an extreme freeform mirror with standard optics in order to propose an integrated system solution for use in future instruments. The work done so far concentrated on identification of compact, fast, widefield optical designs working in the visible, with diffraction limited performance; optimization of the number of required actuators and their layout; the design of an active array to manipulate the face sheet, as well as the actuator design.
In this paper we present the status of the demonstrator development, with focus on the different building blocks: an extreme freeform thin face sheet, the active array, a highly controllable thermal actuator array, and the metrology and control system.
View contact details
