This will count as one of your downloads.
You will have access to both the presentation and article (if available).
We describe the conceptual design of the instrument. In particular, we explain the design and analysis of the straylight rejection baffles and occulter needed to block the image of the solar disc, in order to render the much fainter corona visible. We discuss the development of in-house analysis code to predict the straylight diffraction effects that limit the instrument’s performance, and present results, which we compare against commercially available analysis tools and the results from breadboard testing. In particular, we discuss some of the challenges of predicting straylight effects in this type of instrument and the methods we have developed for overcoming them.
We present the test results from an optical breadboard, designed to verify the end-to-end straylight rejection of the instrument. The design and development of both the breadboard and the test facility is presented. We discuss some of the challenges of measuring very low levels of straylight and how these drive the breadboard and test facility design. We discuss the test and analysis procedures developed to ensure a representative, complete characterisation of the instrument’s straylight response.
The current state-of-the-art commercial metrology systems are not able to measure these types of reflectors because they have to face the measurement of shape and waviness over relatively large areas with a large deformation dynamic range and encompassing a wide range of spatial frequencies. 3-D metrology (tactile coordinate measurement) machines are generally used during the manufacturing process. Unfortunately, these instruments cannot be used in the operational environmental conditions of the reflector.
The application of standard visible wavelength interferometric methods is very limited or impossible due to the large relative surface roughnesses involved. A small number of infrared interferometers have been commercially developed over the last 10 years but their applications have also been limited due to poor dynamic range and the restricted spatial resolution of their detectors. These restrictions affect also the surface error slopes that can be captured and makes their application to surfaces manufactured using CRFP honeycomb technologies rather difficult or impossible.
It has therefore been considered essential, from the viewpoint of supporting future ESA exploration missions, to develop and realise suitable verification tools based on infrared interferometry and other optical techniques for testing large reflector structures, telescope configurations and their performances under simulated space conditions.
Two methods and techniques are developed at CSL.
The first one is an IR-phase shifting interferometer with high spatial resolution. This interferometer shall be used specifically for the verification of high precision IR, FIR and sub-mm reflector surfaces and telescopes under both ambient and thermal vacuum conditions.
The second one presented hereafter is a holographic method for relative shape measurement. The holographic solution proposed makes use of a home built vacuum compatible holographic camera that allows displacement measurements from typically 20 nanometres to 25 microns in one shot. An iterative process allows the measurement of a total of up to several mm of deformation. Uniquely the system is designed to measure both specular and diffuse surfaces.
Due to the orbit of the spacecraft (low altitude polar orbit) and even if the observations are performed in a direction perpendicular to orbit plane, the measurements can be disturbed by the straylight reflected by the earth (albedo) that can generate a periodic perturbation.
The paper details the overall optical design of the baffle. The baffle modelling and straylight computation methods are described and the expected performances are discussed.
This paper presents a conceptual design of a facility placed in a vacuum chamber to eliminate undesired air particles scatter light sources. The specification of the clean room class or vacuum will depend on the required rejection to be measured. Once the vacuum chamber is closed, the stray light level from the external environment can be considered as negligible. Inside the chamber a dedicated baffle design is required to eliminate undesired light generated by the set up itself e.g. retro reflected light away from the instrument under test. This implies blackened shrouds all around the specimen. The proposed illumination system is a 400 mm off axis parabolic mirror with a focal length of 2 m. The off axis design suppresses the problem of stray light that can be generated by the internal obstruction. A dedicated block source is evaluated in order to avoid any stray light coming from the structure around the source pinhole. Dedicated attention is required on the selection of the source to achieve the required large measurement dynamic.
In-orbit verification, calibration, and performance of the Heliospheric Imager on the STEREO mission
Onboard calibration sources for the mid-infrared instrument (MIRI) on the James Webb space telescope
View contact details
