The Instrumentation Division of the Instituto de Astrofísica de Canarias (IAC) is involved since several years in upgrading its capacities to design and manufacture optical components. To this end, we have created a new laboratory (Centre for Advanced Optical Systems, CSOA) which will be capable to design, fabricate and qualify large optical elements. Within these efforts, an optical coating facility is being built aimed at coating and surface finishing of different components, such filters, mirrors and alike, with sizes ranging from few cm to about 1.5 m. The facilities are still in construction and we have already started to experience with medium size filters and mirrors, using a large variety of metallic coatings, both for antireflection properties and spectral band selection.
Our present capacities included a sputtering coating machine, capable to treat pieces up to half a meter of diameter, and E-beam and thermal evaporation. In this contribution we describe the current laboratory setup and report on the results achieved so far in the field of surface coating with different materials.
Additive Manufacture (AM) comprises a group of technologies that allow to go from a 3D model to manufactured components, creating them layer by layer until the part is complete [1]. Among the advantages of AM, the ones that apply most to astronomical instrumentation are part complexity and consolidation, the addition of functionalities, design freedom and lightweighting capability.
The IAC participated in the H2020 international consortium, within the work package on cooled mirrors for astronomical instrumentation [2], whose completion in 2021 left a series of outputs in terms of preferred technologies and materials, lightweight typologies and a cookbook [3] that includes both design guidelines for additive manufacturing and specific values of the geometrical parameters for the parts to be "printed".
The aim of this paper is to present the whole process since the beginning: from the conceptual design, to the results of the studies carried out on the lightweight mirror samples (with the two typologies and the most promising materials of those studied within the IAC for H2020). Comparisons will be made mainly in terms of metrology, dimensional tolerances and optical surface finishes of the mirrors (roughness, SFE, etc.).
The Near-InfraRed Planet Searcher or NIRPS is a precision radial velocity spectrograph developed through collaborative efforts among laboratories in Switzerland, Canada, Brazil, France, Portugal and Spain. NIRPS extends to the 0.98-1.8 μm domain of the pioneering HARPS instrument at the La Silla 3.6-m telescope in Chile and it has achieved unparalleled precision, measuring stellar radial velocities in the infrared with accuracy better than 1 m/s. NIRPS can be used either standalone, or simultaneously with HARPS. Commissioned in late 2022 and early 2023, NIRPS embarked on a 5-year Guaranteed Time Observation (GTO) program in April 2023, spanning 720 observing nights. This program focuses on planetary systems around M dwarfs, encompassing both the immediate solar vicinity and transit follow-ups, alongside transit and emission spectroscopy observations. We highlight NIRPS’s current performances and the insights gained during its deployment at the telescope. The lessons learned and successes achieved contribute to the ongoing advancement of precision radial velocity measurements and high spectral fidelity, further solidifying NIRPS’ role in the forefront of the field of exoplanets.
NIRPS is a fiber-fed AO nIR spectrograph working simultaneously with HARPS at the La Silla-ESO 3.6m telescope. The cryogenic spectrograph operating at 75K employs a cross-dispersed echelle grating (R4), covering a wavelength range of 0.98-1.80 microns in a single image using a Teledyne Hawaii-4RG infrared detector. In early 2022, the NIRPS spectrograph was transported to Chile by plane with all the optical elements mechanically attached to the optical bench inside the vaccum vessel. To ensure the safety of the spectrograph, dedicated work was performed on the shipping crate design, which could survive up to 7g shocks. In La Silla, the vacuum vessel was re-integrated on its support structure and the spectrograph alignment was verified with the H4RG and the injection module. Given the optical design, the alignment phase was performed using a metrology arm and a few optical tests, which minimize the time required for this critical phase. From the validation/technical phase results, two major modifications were required. Firstly, the original grating element was replaced by a new etched crystalline silicon component made by the Fraunhofer Institute for Applied Optics and Precision Engineering. A novel technique was developed to verify the alignment at a warm temperature with the H4RG detector. Secondly, a thermal enclosure was added around the vacuum vessel to optimize thermal stability. Since then, the long-term thermal stability has been better than 0.2mK over 20 days. In this paper, we will review the final spectrograph performances, prior to shipping, and describe the novel techniques developed to minimize shipping costs, AITV phase duration, and grating replacement at the observatory. Additionally, we will discuss the thermal enclosure design to achieve the sub-mK thermal stability.
The first generation of ELT instruments includes an optical-infrared high resolution spectrograph, indicated as ELT-HIRES and recently christened ANDES (ArmazoNes high Dispersion Echelle Spectrograph). ANDES consists of three fibre-fed spectrographs ([U]BV, RIZ, YJH) providing a spectral resolution of ∼100,000 with a minimum simultaneous wavelength coverage of 0.4-1.8 μm with the goal of extending it to 0.35-2.4 μm with the addition of an U arm to the BV spectrograph and a separate K band spectrograph. It operates both in seeing- and diffraction-limited conditions and the fibre-feeding allows several, interchangeable observing modes including a single conjugated adaptive optics module and a small diffraction-limited integral field unit in the NIR. Modularity and fibre-feeding allows ANDES to be placed partly on the ELT Nasmyth platform and partly in the Coudé room. ANDES has a wide range of groundbreaking science cases spanning nearly all areas of research in astrophysics and even fundamental physics. Among the top science cases there are the detection of biosignatures from exoplanet atmospheres, finding the fingerprints of the first generation of stars, tests on the stability of Nature’s fundamental couplings, and the direct detection of the cosmic acceleration. The ANDES project is carried forward by a large international consortium, composed of 35 Institutes from 13 countries, forming a team of almost 300 scientists and engineers which include the majority of the scientific and technical expertise in the field that can be found in ESO member states.
The Instrumentation Division of the Instituto de Astrofísica de Canarias (IAC) is involved since several years in upgrading its capacities to design and manufacture optical components. To this end, we have created a new laboratory (Centre for Advanced Optical Systems, CSOA) which will be capable to design, fabricate and qualify large optical elements. Within these efforts, an optical coating facility is being built aimed at coating and surface finishing of different components, such filters, mirrors and alike, with sizes ranging from few cm to about 1.5 m. The facilities are still in construction and we have already started to experience with medium size filters and mirrors, using a large variety of metallic coatings, both for antireflection properties and spectral band selection. Our present capacities included a sputtering coating machine, capable to treat pieces up to half a meter of diameter, and E-beam and thermal evaporation. In this contribution we describe the current laboratory setup and report on the results achieved so far in the field of surface coating with different materials.
Once the design phase of the Multi-Conjugated Adaptive Optics (MCAO) testbed for the European Solar Telescope (EST) is completed, the system has been assembled and integrated at the Instituto de Astrofísica de Canarias (IAC). The aim of this highly configurable optical testbed is to study different solar adaptive optics solutions, including Single Conjugated Adaptive Optics (SCAO), Ground Layer Adaptive Optics (GLAO), and MCAO. The testbed will be used to evaluate the performance of different wavefront sensing and correction strategies. It consists of different subsystems that are being integrated with high precision by using optomechanical elements mostly developed at IAC. The testbed emulates a 4-m telescope with a Field of View (FoV) of 70 arcseconds. It currently operates as a SCAO configuration consisting of: an illumination system with point-like and extended source capability coupled with a configurable turbulence simulator based on Phase Screens (PS); a pupil-conjugated Deformable Mirror (DM) with 820 actuators; a high order Shack-Hartmann Wavefront Sensor (SH-WFS) with 33 subapertures across the pupil, which measures on-axis aberrations with a FoV of 10 arcseconds; and the science detector. The next steps include the integration of the elements that will provide GLAO and MCAO capabilities, such as two SH-WFSs with a FoV of 70 arcseconds, and two DMs conjugated to different atmospheric layers. This contribution describes the optomechanical components designed and the alignment procedure carried out to set up each subsystem and configuration to be studied.
NIRPS is an infrared precision Radial Velocity (pRV) spectrograph covering the range 950 nm-1800 nm. NIRPS uses a high-order Adaptive Optics (AO) system to couple the starlight into a fiber corresponding to 0.4" on the sky as efficiently or better than HARPS or ESPRESSO couple the light in a 1.0" fiber. This allows the spectrograph to be very compact, more thermally stable, and less costly. Using a custom tan(θ)=4 dispersion grating in combination with a start-of-the-art Hawaii4RG detector makes NIRPS very efficient with complete coverage of the YJH bands at just under 100 000 resolution. On the ESO 3.6-m telescope, NIRPS and HARPS are working simultaneously on the same target, building a single powerful high-resolution, high-fidelity spectrograph covering the 0.37-1.8 µm domain. NIRPS will complement HARPS in validating Earth-like planets found around G and K-type stars whose signal is at the same order of magnitude than the stellar noise. While the telescope-side AO system was installed on the ESO 3.6-m telescope in 2019, the infrared cryogenic spectrograph has been integrated at the telescope in early-2022 and has had first light in June 2022. Results from the first light mission show that NIRPS performs very nicely, that the AO system works up to magnitude I=14.5, that the transmission matches requirements and that the RV stability of 1 m/s is within reach While performance assessment is ongoing, NIRPS has demonstrated on-sky m/s-level stability over a night and <3 m/s level over two weeks. Limitations on the RV performances arise from modal noise that can be mitigated through better scrambling strategies. Better performances are also expected following a grating upgrade in July 2022; these will be tested in late-2022.
The first generation of ELT instruments includes an optical-infrared high resolution spectrograph, indicated as ELT-HIRES and recently christened ANDES (ArmazoNes high Dispersion Echelle Spectrograph). ANDES consists of three fibre-fed spectrographs (UBV, RIZ, YJH) providing a spectral resolution of ∼100,000 with a minimum simultaneous wavelength coverage of 0.4-1.8 µm with the goal of extending it to 0.35-2.4 µm with the addition of a K band spectrograph. It operates both in seeing- and diffraction-limited conditions and the fibre-feeding allows several, interchangeable observing modes including a single conjugated adaptive optics module and a small diffraction-limited integral field unit in the NIR. Its modularity will ensure that ANDES can be placed entirely on the ELT Nasmyth platform, if enough mass and volume is available, or partly in the Coudé room. ANDES has a wide range of groundbreaking science cases spanning nearly all areas of research in astrophysics and even fundamental physics. Among the top science cases there are the detection of biosignatures from exoplanet atmospheres, finding the fingerprints of the first generation of stars, tests on the stability of Nature’s fundamental couplings, and the direct detection of the cosmic acceleration. The ANDES project is carried forward by a large international consortium, composed of 35 Institutes from 13 countries, forming a team of more than 200 scientists and engineers which represent the majority of the scientific and technical expertise in the field among ESO member states.
NIRPS (Near Infra-Red Planet Searcher) is an AO-assisted and fiber-fed high-resolution spectrograph operating in the YJH-bands at the ESO 3.6m telescope in La Silla Observatory, Chile. The optimal geometrical scrambling and the minimization of the modal noise, requested to reach 1 m s−1 precision in radial velocity, is obtained by combining octagonal fibers, a fiber stretcher, a double-scrambler, and a tip-tilt scanning of the 29-µm fiber core. We tested the performance of the fiber-link design on sky and evaluated the modal noise mitigation via near and far-field images taken at the fiber-link output. Without the inclusion of the stretcher and tip-tilt scanning, an extreme injection position at the edge of the fiber should induce an apparent change in radial velocity of ~20 m s−1 with respect to a well-centered injection. Observations with the entire instrument of fast-rotating hot stars show that the stretcher and tip-tilt scanning significantly reduce the modal noise from 1.6% to 0.7%. Optimizing the tip-tilt scanning pattern can further minimize the modal noise, thereby improving the precision in radial velocity.
Here is presented the tests results and the lessons learnt concerning an opto-mechanical device to scan the GREGOR telescope field of view. The scanning is done by means of a set of mirrors and a mechanism which allows to keep the optical path length constant, regardless the portion of the field being scanned. This system is intended to feed a static image slicer used for solar observations. The tight level of tolerances required makes its design and tests a real challenging activity which produces a lot of unexpected lessons to learn. The story after the issues detection, the consequent root cause analysis, the additional tests and tools developed to study the phenomena, and the construction of the solutions and issue mitigation mechanisms provides a good background to elaborate some recommendations for future developments.
ESPRESSO is a fiber feed ultrastable High Resolution Spectrograph designed to work in the Combined-Coudé focus of Very Large Telescopes (VLT). A high resolution (R~100000) and an ultra-high resolution (R~220000) mode will be available to collect the light coming of one VLT telescope. In addition, ESPRESSO has an observing mode which allows to collect light of 2, 3 or 4 VLT units. This mode can feed simultaneously the spectrograph using a 4x1 fiber combiner. In the combiner, the light from 4 octagonal fibers will be mixed when projected onto a square fiber, as a double scrambler device. Here it is presented the design, manufacture, integration and tests for the 4x1 combiner of the ESPRESSO Fiber Link.
The optical instrument used to measure and characterize sky quality at the IAC observatories is the DIMM (differential image motion measurements). The optical system and its mode of operation are relatively simple. It consists, basically, placing two equal apertures at the entrance of a telescope, in one of them an optical wedge is located. In this way, two beams of the same object are obtained which will lead to two on the focal plane of the telescope but laterally separated a few seconds arc. The complexity of this optical system lies in the "simplicity" of the plate used to separate the beams, it is a flat-faced wedge of a few minutes, and this is where problems arise when manufacturing it.
In this paper we present a new optical system concept to separate the beams. This is done using two optical flats tilted. The optical flats are not placed at the entrance of the telescope, but in the convergent beam. The optical design, manufacture and the test results obtained are presented.
Pierced mirrors are used in high resolution and ultrastable spectrographs to feed guiding cameras and to improve the target stability. This paper describes the concept, design, manufacture, test and integration of ESPRESSO pierced mirrors which are part of the Fiber Link subsystem. ESPRESSO is a spectrograph located in the Coude Laboratory of VLT that can be feed by the light of any VLT telescope. Similar mirrors will be used in the Fiber Link subsystem of NIRSP spectrograph which is an Infrared spectrograph for the 3.6 m telescope of the Silla Observatory.
We present the commissioning of an IFU based on image-slicers and a 2D-Field-of-View Scanning System (FoV-SS) for the GREGOR Infrared Spectrograph (GRIS). The prototype of the image-slicer has eight slices of 1.8 mm x 0.1 mm in Zerodur, covering an area of 20 arcsec2. The FoV-SS, equipped with three Degrees of Freedom (DoF), allows to scan a region of 1 arcmin2, feeding the image-slicer with different portions of the field of view. A batch of tests was done during the Assembly, Integration and Verification (AIV) at GREGOR telescope.
An image slicer has been proposed for the Integral Field Spectrograph [1] of the 4-m European Solar Telescope (EST) [2] The image slicer for EST is called MuSICa (Multi-Slit Image slicer based on collimator-Camera) [3] and it is a telecentric system with diffraction limited optical quality offering the possibility to obtain high resolution Integral Field Solar Spectroscopy or Spectro-polarimetry by coupling a polarimeter after the generated slit (or slits). Considering the technical complexity of the proposed Integral Field Unit (IFU), a prototype has been designed for the GRIS spectrograph at GREGOR telescope at Teide Observatory (Tenerife), composed by the optical elements of the image slicer itself, a scanning system (to cover a larger field of view with sequential adjacent measurements) and an appropriate re-imaging system. All these subsystems are placed in a bench, specially designed to facilitate their alignment, integration and verification, and their easy installation in front of the spectrograph. This communication describes the opto-mechanical solution adopted to upgrade GRIS while ensuring repeatability between the observational modes, IFU and long-slit. Results from several tests which have been performed to validate the opto-mechanical prototypes are also presented.
Cryostats are closed chambers that hinder the monitoring of materials, structures or systems installed therein. This paper presents a webcam-based measurement and monitoring system, which can operate under vacuum and cryogenic conditions to be mainly used in astrophysical applications. The system can be configured in two different assemblies: wide field that can be used for mechanism monitoring and narrow field, especially useful in cryogenic precision measurements with a resolution up to 4 microns/pixel.
The High Optical Resolution Spectrograph (HORS) is a proposed high-resolution spectrograph for the
10-m Gran Telescopio Canarias (GTC) based on components from UES, a spectrograph which was in
use at the 4.2-m William Herschel Telescope (WHT) between 1992 and 2001.
HORS is designed as a cross-dispersed echelle spectrograph to observe in the range 380-800 nm with
a FWHM resolving power of about 50,000. HORS would operate on the GTC as a general-purpose
high-resolution spectrograph, and it would serve as a test-bed for some of the technologies proposed
for ESPRESSO – an ultra-high stability spectrograph planned for the Very Large Telescope (VLT) of
the European Southern Observatory.
The HORS spectrograph will be placed in the Coudé room, where it can enjoy excellent thermal and
mechanical stability, fiber fed from the Nasmyth focus, which is shared with OSIRIS. Inside the
spectrograph, incoming light will hit a small folder mirror before reaching the collimator. After a
second folder, the light will go through a set of three prisms and an Echelle grating before entering the
spectrograph camera and, finally, reaching the detector.
This manuscript contains a summary of the whole process that has transformed UES into HORS, with
all the mechanical and optical modifications that have been introduced to reach the final layout.
HARMONI is a visible and near-IR integral field spectrograph, providing the E-ELT's spectroscopic capability at first
light. It obtains simultaneous spectra of 32000 spaxels, at a range of resolving powers from R~4000 to R~20000,
covering the wavelength range from 0.47 to 2.45 μm. The 256 × 128 spaxel field of view has four different plate scales,
with the coarsest scale (40 mas) providing a 5″ × 10″ FoV, while the finest scale is a factor of 10 finer (4mas).
We describe the opto-mechanical design of HARMONI, prior to the start of preliminary design, including the main subsystems
- namely the image de-rotator, the scale-changing optics, the splitting and slicing optics, and the spectrographs.
We also present the secondary guiding system, the pupil imaging optics, the field and pupil stops, the natural guide star
wavefront sensor, and the calibration unit.
This communication reviews the participation of the Instituto de Astrofísica de Canarias (IAC) in the design of the
European Solar Telescope. Apart of being the coordinator institution of the whole project, and, as such, responsible for
the project managing, the IAC leads several tasks like overall instrument definition or characterization of the
atmospheric turbulence profile with height or the definition of adequate detectors. More in particular, the IAC will
design and build two long-base SHABAR (SHAdow BAnd Ranger), instruments to measure medium-altitude seeing.
The IAC is also responsible for the design, together with other institutions, of the design of grating spectropolarimeters
suitable for multiwavelength high spatial and spectral resolution.
We present EDiFiSE, a prototype instrument for the observation of high-contrast systems, combining an adaptive
optics (AO) system and an equalized integral field unit (EIFU). The design of the AO system takes into account
the statistical behaviour of the atmospheric turbulence structure at the Canary Islands (Spain) astronomical
observatories: Roque de los Muchachos (ORM) on the island of La Palma and Teide observatory (OT) in
Tenerife. The AO will have the capability of adapting to the prevailing turbulence conditions; in this sense,
the EDiFiSE AO unit will be an 'adaptable' adaptive optics system. The corrected beam feeds an hexagonal
integral field unit formed by 331 micro-lenslets, which focus the intensity distribution at the focal plane into 331
optical fibers. The central seven fibers of the bundle include variable attenuators for the equalization of these
fibers output intensities, matching them to the dynamical range of the detector and reducing the optical cross
talk inside the spectrograph. This technique, called equalized integral field spectroscopy (Arribas, Mediavilla &
Fuensalida 19981), permits to obtain spectral and spatial information of the equalized object and its surroundings
as well as accurate relative photometry and astrometry.
We have been testing at laboratory commercial variable attenuators commonly used in telecommunication applications
for their used in astronomy. Such variable attenuators are going to be included in the central fibers
of the integral field unit (IFU) of the prototype instrument EDiFiSE (Equalized and Diffraction-limited Field
Spectrograph Experiment). The EDiFiSE IFU is conformed by a lenslet array of 331 lenses, 331 fibers and seven
variable attenuators (inserted in the seven central fibers of the bundle). We present here the characterization of
the attenuator devices tested for their use in astronomy and, in particular, to their application in the observation
of object of large dynamic range using equalized integral field spectroscopy. We also present the optical tests we
have carried out to characterize the performances of two lenslet arrays acquired in the framework of the EDiFiSE
project.
A theoretical design and experimental realization of multi-layer mirrors for Fabry-Perot interferometry and optical telecommunications is described in this work. The mirrors were designed and fabricated by 13 successive thin layers to achieve very high reflectance at optical wavelengths around 1300 nm. Thin layers are ZnS y MgF2 presenting high and low refractive index respectively. Layer thickness are of λo/2 at λo = 656 nm. Experimental results include the characterization of the transmittance of mirrors around 1300 nm. Additionally the mirrors were integrated in a Fabry-Perot interferometer to characterize optical sources emitting at 1300 nm. Finally to show a practical application, optical phase modulation was analyzed, using the fabricated mirrors.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.