Dr. Glenn I. Matthews Profile

Dr. Glenn I. Matthews

at RMIT Univ

SPIE Involvement:

Author

Publications (1)

Proceedings Article | 30 December 2008 Paper

Joint time-frequency analysis of micro-acoustic devices

Glenn Matthews, Alireza Baghai-Wadji

Proceedings Volume 7269, 72690Y (2008) https://doi.org/10.1117/12.814462

KEYWORDS: Finite element methods, Acoustics, Time-frequency analysis, Wave plates, Fourier transforms, Modulation, Amplitude modulation, Wave propagation, Signal analyzers, Electrodes

Read Abstract +

In this paper, a novel analysis technique for the performance evaluation of micro-acoustic devices has been proposed. Whereas traditional techniques typically focus solely on the frequency domain characteristics, we employ a Joint Time-Frequency Analysis (JTFA), which has been shown to provide a more complete characterisation of overall device performance and underlying physical phenomena. Although an emphasis is placed on a Flexural Plate Wave (FPW) device, the analysis technique presented is applicable to a wider range of micro-acoustic devices including Surface Acoustic Wave (SAW) structures and Thin-Film Bulk Acoustic Wave Resonators (TFBARs). SAWdevices, and indeed general filters, are typically described by a frequency domain characteristic, whereby the entire time domain information is discarded. This type of analysis assumes that the device has reached quasistationary conditions. By employing JTFA, the device performance can simultaneously be studied as a function of both time and frequency. This type of analysis is typically useful where spurious acoustic modes are generated which may influence the overall filter characteristic. We have investigated the functional properties of various JTFA kernels, including those appearing in the Wigner-Ville, Choi-Williams and Page distributions. A known deficiency associated with JTFA is the appearance of a number of spurious cross-terms in the computations. Whereas the cross-terms are relatively simple to detect for "monochromatic" (single-component) signals, it is not a trivial task to minimise such artifacts for "polychromatic" (multi-component) signals, which are typical in micro-acoustic devices. We propose novel methods for reducing the cross-terms interference appearing in JTFA, thereby improving the performance of the analysis technique. To investigate the application of the proposed technique, the simulated time domain response of a FPW device was investigated. The Finite Element Method (FEM) package ANSYS 8.0 was utilised to obtain the impulse response of the FPW structure under a dynamic transient analysis. A comparison is also made with the spectral domain Green's function to verify the FEM solution, where excellent agreement is obtained. Based on the FEM solutions, the insertion loss characteristics is calculated which represents a commonly applied frequency domain method of analysing micro-acoustic devices. A comparison has been made between the insertion loss characteristics and the proposed approach, where it is clearly demonstrated that the problem-adapted technique provides significantly more detailed information.

View contact details

UPDATE YOUR PROFILE

Is this your profile? Update it now.

Sign into your SPIE.org account

Don’t have a profile and want one?

Create an account on SPIE.org

Keywords/Phrases

Search In:

Publication Years