This will count as one of your downloads.
You will have access to both the presentation and article (if available).
Taking advantage of emerging technology in mirror manufacturing and spacecraft formation flying, Simbol-X will push grazing incidence imaging up to ~ 80 keV and beyond, providing a strong improvement both in sensitivity and angular resolution compared to all instruments that have operated so far above 10 keV. This technological breakthrough will open a new highenergy window in astrophysics and cosmology. Here we will address the problematic of the development for such a distributed and deformable instrument. We will focus on the main performances of the telescope, like angular resolution, sensitivity and source localization. We will also describe the specificity of the calibration aspects of the payload distributed over two satellites and therefore in a not “frozen” configuration.
Thus, for the needs of PEGASE mission – a possible DARWIN in flight demonstration- SAGEIS-CSO has been asked by CNES to design a fine longitudinal sensor able to work at 120 K while performing displacement measurements at a working distance range of 25 to 250 m. Its required performances are a resolution and a precision of 25 nm.
This activity succeeds to the MOUSE II system development, which has demonstrated the ability to obtain the required laser metrology using a frequency stabilised laser, a compact and totally passive Michelson type sensor head plus a detection unit for data processing. Optical signals are routed using fibres, allowing the sensor head to be alone in a cryogenic environment.
Now, the goal is to obtain a validated prototype at a MQ level by the end of 2007.
For that, the laser source will be an update of the flight models made for IASI, using a more powerful DFB diode, pin-to-pin compatible with the previous design, and then giving minor changes. The current regulation was optimized in order not to degrade the narrow diode spectral width.
The opto-thermo-mechanical design of the sensor head, in collaboration with AAS, is also under progress, and constitutes the major evolution of the MOUSE II.
During a phase-0 study performed in 2005 at CNES, ONERA and in the laboratories, the critical subsystems of the optical payload have been investigated and a preliminary system integration has been performed. These subsystems are mostly the broadband (2.5-5 μm) nuller and the cophasing system (visible) dedicated to the real-time control of the OPD/tip/tilt inside the payload. A laboratory breadboard of the payload is under definition and should be built in 2007.
Since 2006, PERSEE (PEGASE Experiment for Research and Stabilization of Extreme Extinction) laboratory test bench is under development by a consortium composed of Centre National d’Etudes Spatiales (CNES), Institut d’Astrophysique Spatiale (IAS), Observatoire de Paris-Meudon (LESIA), Observatoire de la Côte d’Azur (OCA), Office National d’Etudes et de Recherches Aérospatiales (ONERA), and Thalès Alénia Space (TAS) [8]. It is mainly funded by CNES R&D. PERSEE couples an infrared wide band nulling interferometer with local OPD and tip/tilt control loops and a free flying Guidance Navigation and Control (GNC) simulator able to introduce realistic disturbances. Although it was designed in the framework of the PEGASE free flying space mission, PERSEE can adapt very easily to other contexts like FKSI (in space, with a 10 m long beam structure) or ALADDIN [9] (on ground, in Antarctica) because the optical designs of all those missions are very similar. After a short description of the experimental setup, we will present first the results obtained in an intermediate configuration with monochromatic light. Then we will present some preliminary results with polychromatic light. Last, we discuss some very first more general lessons we can already learn from this experiment.
NEAT is an astrometric mission proposed to ESA with the objectives of detecting Earth-like exoplanets in the habitable zone of nearby solar-type stars. In NEAT, one fundamental aspect is the capability to measure stellar centroids at the precision of 5 × 10-6 pixel.
Current state-of-the-art methods for centroid estimation have reached a precision of about 2 × 10-5 pixel at two times Nyquist sampling, this was shown at the JPL by the VESTA experiment.1 A metrology system was used to calibrate intra and inter pixel quantum efficiency variations in order to correct pixelation errors.
The European part of the NEAT consortium is building a testbed in vacuum in order to achieve 5 × 10-6 pixel precision for the centroid estimation. The goal is to provide a proof of concept for the precision requirement of the NEAT spacecraft. In this paper we present the metrology and the pseudo stellar sources sub-systems, we present a performance model and an error budget of the experiment and finally we describe the present status of the demonstration.
Potential of balloon payloads for in flight validation of direct and nulling interferometry concepts
View contact details
No SPIE Account? Create one
