Proceedings Article | 21 May 2014
Proc. SPIE. 9099, Polarization: Measurement, Analysis, and Remote Sensing XI
KEYWORDS: Long wavelength infrared, Hyperspectral imaging, Linear polarizers, Polarization, Imaging systems, Calibration, Polarizers, Polarimetry, Black bodies, Polysomnography
Polarimetric hyperspectral imaging (P-HSI) has the potential to improve target detection, material identification, and
background characterization over conventional hyperspectral imaging and polarimetric imaging. To fully exploit the
spectro-polarimetric signatures captured by such an instrument, a careful calibration process is required to remove
the spectrally- and polarimetrically-dependent system response (gain). Calibration of instruments operating in the
long-wave infrared (LWIR, 8μm to 12 μm) is further complicated by the polarized spectral radiation generated within the
instrument (offset). This paper presents a calibration methodology developed for a LWIR Telops Hyper-Cam modified
for polarimetry by replacing the entrance window with a rotatable holographic wire-grid polarizer (4000 line/mm, ZnSe
substrate, 350:1 extinction ratio). A standard Fourier-transform spectrometer (FTS) spectro-radiometric calibration
is modified to include a Mueller-matrix approach to account for polarized transmission through and polarized selfemission
from each optical interface. It is demonstrated that under the ideal polarizer assumption, two distinct
blackbody measurements at polarizer angles of 0°, 45°, 90°, and 135° are sufficient to calibrate the system for apparent degree-of-linear-polarization (DoLP) measurements. Noise-equivalent s1, s2, and DoLP are quantified using a wide-area blackbody. A polarization-state generator is used to determine the Mueller deviation matrix. Finally, a realistic scene
involving buildings, cars, sky radiance, and natural vegetation is presented.
