Mr. Karel Desnijder Profile

Karel Desnijder

at KULeuven

SPIE Involvement:

Author

Publications (3)

This will count as one of your downloads.

You will have access to both the presentation and article (if available).

DOWNLOAD NOW

This content is available for download via your institution's subscription. To access this item, please sign in to your personal account.

Email or Username Forgot your username?

Password Forgot your password?

Show

Keep me signed in

No SPIE account? Create an account

Proceedings Article | 19 November 2019 Paper

Multi-channel freeform optics for glare-free lighting

Youri Meuret, Karel Desnijder, Wouter Ryckaert, Peter Hanselaer

Proceedings Volume 11185, 1118503 (2019) https://doi.org/10.1117/12.2537291

KEYWORDS: Freeform optics, Lens design, Light sources and illumination, Light emitting diodes, Reflectors, Light sources, Light, Diffusers

Read Abstract +

Glare and visual discomfort are important factors that should be taken into account in illumination design. Conventional freeform optics offer perfect control over the outgoing intensity distribution, but few control over the near-field luminance distribution. Observing the emitted light from a high-brightness LED through a freeform lens, yields a high peak luminance that can result in glare. Diffusors can be used to reduce these peak luminances, but such components do not offer accurate control over the resulting intensity pattern. An alternative approach to reduce the observed peak luminance is by spreading the emitted light over multiple optical channels via freeform lens arrays. Such freeform arrays still allow excellent control over the resulting intensity distribution. In this paper the design of freeform lens arrays is discussed in both 2D and 3D. The possibilities and main limitations of the resulting components are discussed in detail by considering a few examples. In order to understand the design algorithms for multi-channel freeform optics, the paper starts with a brief introduction to the design of single-channel freeform optics for obtaining prescribed illumination patterns.

Proceedings Article | 15 June 2018 Paper

Design of a freeform, luminance spreading illumination lens with a continuous surface

Karel Desnijder, Ward Deketelaere, Michael Vervaeke, Hugo Thienpont, Peter Hanselaer, Youri Meuret

Proceedings Volume 10693, 106930F (2018) https://doi.org/10.1117/12.2314064

KEYWORDS: Light sources, Light, Light emitting diodes, Lens design, Collimation, Freeform optics, Manufacturing

Read Abstract +

Given the high source luminance of current white LEDs, spreading this luminance in order to avoid glare, is a crucial aspect of effective LED lighting system design. In previous work, a method has been presented to design a rotational symmetric or extruded lens consisting of different freeform segments. These segments are designed in such a way that they spread the incoming rays into multiple overlapping fans of which the combination forms a desired target intensity pattern. The advantage of using freeform lens segments is that these can be precisely tailored to different target intensity patterns, e.g. intensity patterns with a sharp cut-off. The transformation of the incoming intensity distribution to the target intensity distribution can be seen as a linear transformation. If the source and target distributions are discretized into a finite number of bins, it is possible to represent this transformation as a matrix. With an iterative procedure one can quickly generate such transformations for specific source and target distributions. The spreading of light at each point of the optical surface can then be realized with small freeform lens segments. These individual freeform segments can be implemented in two different ways, convex or concave. In this paper, the case is considered in which convex and concave freeform structures are alternated which allows for the creation of a continuous, smooth, oscillating lens surface. This approach can improve both the performance and manufacturability when compared with a discontinuous surface. A drawback of the approach is the fact that one loses control over the overall form factor of the resulting lens. The derived iterative procedure was used to design a luminance spreading illumination lens with smooth, wavy structures on one side and a flat surface on the other side. The lens was designed to generate a specific wide-beam target intensity distribution when combined with a high-brightness LED.

Proceedings Article | 27 April 2016 Paper

Evaluation of simulation alternatives for the brute-force ray-tracing approach used in backlight design

Karel Desnijder, Peter Hanselaer, Youri Meuret

Proceedings Volume 9889, 98890O (2016) https://doi.org/10.1117/12.2227655

KEYWORDS: Waveguides, Monte Carlo methods, Ray tracing, Light scattering, Clouds, Scattering, LED backlight, Optimization (mathematics), Testing and analysis, Performance modeling, Reflection, Modeling, Light, Light sources

Read Abstract +

A key requirement to obtain a uniform luminance for a side-lit LED backlight is the optimised spatial pattern of structures on the light guide that extract the light. The generation of such a scatter pattern is usually performed by applying an iterative approach. In each iteration, the luminance distribution of the backlight with a particular scatter pattern is analysed. This is typically performed with a brute-force ray-tracing algorithm, although this approach results in a time-consuming optimisation process. In this study, the Adding-Doubling method is explored as an alternative way for evaluating the luminance of a backlight. Due to the similarities between light propagating in a backlight with extraction structures and light scattering in a cloud of light scatterers, the Adding-Doubling method which is used to model the latter could also be used to model the light distribution in a backlight. The backlight problem is translated to a form upon which the Adding-Doubling method is directly applicable. The calculated luminance for a simple uniform extraction pattern with the Adding-Doubling method matches the luminance generated by a commercial raytracer very well. Although successful, no clear computational advantage over ray tracers is realised. However, the dynamics of light propagation in a light guide as used the Adding-Doubling method, also allow to enhance the efficiency of brute-force ray-tracing algorithms. The performance of this enhanced ray-tracing approach for the simulation of backlights is also evaluated against a typical brute-force ray-tracing approach.

My Library

You currently do not have any folders to save your paper to! Create a new folder below.

Folder Name

Folder Description

View contact details

UPDATE YOUR PROFILE

Is this your profile? Update it now.

Sign into your SPIE.org account

Don’t have a profile and want one?

Create an account on SPIE.org

Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks. You are receiving this notice because your organization may not have SPIE eBooks access.*

*Shibboleth/Open Athens users─please sign in to access your institution's subscriptions.

To obtain this item, you may purchase the complete book in print or electronic format on SPIE.org.

ORGANIZATIONAL
Sign in with credentials provided by your organization.

Organizational Username

Organizational Password

Show/Hide Password

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available

Members:

Non-members: ADD TO CART

Keywords/Phrases

Search In:

Publication Years