Ms. Kate Johnson Profile

Kate Johnson

Director of Engineering at ImageXpert Inc

SPIE Involvement:

Author

Publications (5)

Proceedings Article | 19 January 2009 Paper

A strobe-based inspection system for drops-in-flight

Yair Kipman, Prashant Mehta, Kate Johnson

Proceedings Volume 7242, 72420H (2009) https://doi.org/10.1117/12.807640

KEYWORDS: Head, Imaging systems, Image analysis, Camera shutters, Control systems, Inspection, Electronics, Cameras, Satellites, Visualization

Read Abstract +

Proceedings Article | 18 December 2003 Paper

Scanner-based image quality measurement system for automated analysis of EP output

Yair Kipman, Prashant Mehta, Kate Johnson

Proceedings Volume 5294, (2003) https://doi.org/10.1117/12.530456

KEYWORDS: Image quality, Scanners, Printing, Quality measurement, Optical character recognition, Quality systems, Densitometry, Image processing, Inspection, Optical inspection

Read Abstract +

Inspection of electrophotographic print cartridge quality and compatibility requires analysis of hundreds of pages on a wide population of printers and copiers. Although print quality inspection is often achieved through the use of anchor prints and densitometry, more comprehensive analysis and quantitative data is desired for performance tracking, benchmarking and failure mode analysis. Image quality measurement systems range in price and performance, image capture paths and levels of automation. In order to address the requirements of a specific application, careful consideration was made to print volume, budgetary limits, and the scope of the desired image quality measurements. A flatbed scanner-based image quality measurement system was selected to support high throughput, maximal automation, and sufficient flexibility for both measurement methods and image sampling rates. Using an automatic document feeder (ADF) for sample management, a half ream of prints can be measured automatically without operator intervention. The system includes optical character recognition (OCR) for automatic determination of target type for measurement suite selection. This capability also enables measurement of mixed stacks of targets since each sample is identified prior to measurement. In addition, OCR is used to read toner ID, machine ID, print count, and other pertinent information regarding the printing conditions and environment. This data is saved to a data file along with the measurement results for complete test documentation. Measurement methods were developed to replace current methods of visual inspection and densitometry. The features that were being analyzed visually could be addressed via standard measurement algorithms. Measurement of density proved to be less simple since the scanner is not a densitometer and anything short of an excellent estimation would be meaningless. In order to address the measurement of density, a transfer curve was built to translate the gray scale values that are the fundamental scanner output into an estimation of density. The correlation coefficient was excellent and was deemed to be adequate for this application. This paper addresses the automation process, image analysis and data management required by this application.

Proceedings Article | 18 December 2003 Paper

INCITS W1.1 macro-uniformity

D. Rene Rasmussen, William Kress, Yee Ng, Marguerite Doyle, Kevin Donohue, Kate Johnson, Susan Zoltner

Proceedings Volume 5294, (2003) https://doi.org/10.1117/12.527402

KEYWORDS: Scanners, Printing, Standards development, Image quality, RGB color model, Calibration, Image quality standards, Visualization, Modulation transfer functions, Colorimetry

Read Abstract +

Proceedings Article | 4 April 2001 Paper

Robust line scan camera-based inspection system for ink-jet nozzle plates

Yair Kipman, David Wolin, Kate Johnson

Proceedings Volume 4301, (2001) https://doi.org/10.1117/12.420897

KEYWORDS: Inspection, Cameras, Image processing, Imaging systems, Line scan image sensors, CCD cameras, Image analysis, Sensors, Motion controllers, Image quality

Read Abstract +

Proceedings Article | 22 December 1998 Paper

Measurement and control of color image quality

Eric Schneider, Kate Johnson, David Wolin

Proceedings Volume 3648, (1998) https://doi.org/10.1117/12.334602

KEYWORDS: Image quality, Quality measurement, Calibration, Solids, Image analysis, Cameras, Image processing, Environmental sensing, Tolerancing, System integration

Read Abstract +

View contact details

UPDATE YOUR PROFILE

Is this your profile? Update it now.

Sign into your SPIE.org account

Don’t have a profile and want one?

Create an account on SPIE.org

Keywords/Phrases

Search In:

Publication Years