Dr. Kevin J. Land Profile

Dr. Kevin J. Land

at Council for Scientific and Industrial Research

SPIE Involvement:

Author

Publications (16)

Proceedings Article | 24 January 2019 Paper

Paper

Biocompatibility in inkjet-printed paper-based microelectronic biosensors

T. Schwabe, A. Truyts, P. Bezuidenhout, K. Land, T.-H. Joubert

Proceedings Volume 11043, 110430D (2019) https://doi.org/10.1117/12.2502577

KEYWORDS: Silver, Gold, Printing, Inductance, Manufacturing, Bacteria, Resistance, Biosensors, Capacitance, Nanoparticles

Read Abstract +

Proceedings Article | 24 January 2019 Paper

Paper

Electronic synthesis of printed resistor layout for a thermal petri dish incubator

M. Pilkington, T.-H. Joubert, P. Bezuidenhout, K. Land

Proceedings Volume 11043, 110430F (2019) https://doi.org/10.1117/12.2502542

KEYWORDS: Resistance, Resistors, Software development, Silver, Printing, Nanoparticles, Java, Structural design, Microelectromechanical systems, Inkjet technology

Read Abstract +

Proceedings Article | 24 January 2019 Paper

Paper

Printed electronics MIM capacitor for a microsystem power supply

Jan Conradie, Kevin Land, Trudi-Heleen Joubert

Proceedings Volume 11043, 110430E (2019) https://doi.org/10.1117/12.2502522

KEYWORDS: Capacitors, Dielectrics, Electronics, Capacitance, Power supplies, Silver, Printing, Plasma treatment, Oxygen, Microsystems

Read Abstract +

Proceedings Article | 24 January 2019 Paper

Paper

Development of a printed paper-based origami electrochemical sensor for the detection of heavy metals in water

Phophi Madzivhandila, Suzanne Smith, Letta Ntuli, Kevin Land

Proceedings Volume 11043, 110430H (2019) https://doi.org/10.1117/12.2322333

KEYWORDS: Sensors, Chromatography, Metals, Lead, Printing, Cadmium, Microfluidics, Computer aided design, Water, Ions

Read Abstract +

Proceedings Article | 24 January 2019 Paper

Paper

Printed, flexible wireless temperature logging system

Phophi Madzivhandila, Adelaide Oberholzer, Suzanne Smith, Kevin Land, Jan Korvink, Dario Mager

Proceedings Volume 11043, 110430I (2019) https://doi.org/10.1117/12.2500747

KEYWORDS: Printing, Antennas, Sensors, Temperature metrology, Adhesives, Electronics, Manufacturing, Environmental monitoring, Silver

Read Abstract +

Proceedings Article | 3 February 2017 Paper

Paper

High resolution CMOS capacitance-frequency converter for biosensor applications

I. Ghoor, T-H. Joubert, K. Land

Proceedings Volume 10036, 100360F (2017) https://doi.org/10.1117/12.2244148

KEYWORDS: Biosensors, Capacitance, Sensors, CMOS sensors, Capacitors, Clocks, Switches, Amplifiers, Digital electronics, Manufacturing

Read Abstract +

Proceedings Article | 3 February 2017 Paper

Paper

Micro-incubator for bacterial biosensing applications

Estine Clasen, Kevin Land, Trudi-Heleen Joubert

Proceedings Volume 10036, 100360G (2017) https://doi.org/10.1117/12.2245443

KEYWORDS: Bacteria, Silver, Biosensing, Temperature metrology, Manufacturing, Sensors, Resistance, Temperature sensors, Finite element methods, Convection

Read Abstract +

Proceedings Article | 3 February 2017 Paper

Paper

Development of paper-based wireless communication modules for point-of-care diagnostic applications

Suzanne Smith, Petroné Bezuidenhout, Kevin Land, Jan Korvink, Dario Mager

Proceedings Volume 10036, 100360J (2017) https://doi.org/10.1117/12.2244296

KEYWORDS: Diagnostics, Microfluidics, Point-of-care devices, Wireless communications, Sensors, Antennas, Electronic circuits, Printing, Computer aided design, Silver

Read Abstract +

Proceedings Article | 3 February 2017 Paper

Paper

A low-power CMOS operational amplifier IC for a heterogeneous paper-based potentiostat

P. Bezuidenhout, K. Land, T-H. Joubert

Proceedings Volume 10036, 100360P (2017) https://doi.org/10.1117/12.2245759

KEYWORDS: Transistors, Manufacturing, Device simulation, Resistors, Capacitors, Electrodes, Amplifiers, Sensors, Signal detection, Biosensing

Read Abstract +

Proceedings Article | 3 February 2017 Paper

Paper

The characterisation and design improvement of a paper-based E.coli impedimetric sensor

P. Bezuidenhout, S. Kumar, M. Wiederoder, J. Schoeman, K. Land, T-H. Joubert

Proceedings Volume 10036, 100360L (2017) https://doi.org/10.1117/12.2245754

KEYWORDS: Sensors, Biosensors, Electrodes, Gold, Silver, Manufacturing, Adsorption, Ranging, Printing, Sensor performance

Read Abstract +

Proceedings Article | 3 February 2017 Paper

Paper

Development of paper-based electrochemical sensors for water quality monitoring

Suzanne Smith, Petroné Bezuidenhout, Haitao Zheng, Mesuli Mbanjwa, Mariette Conning, Nithyadharseni Palaniyandy, Kenneth Ozoemena, Kevin Land

Proceedings Volume 10036, 100360C (2017) https://doi.org/10.1117/12.2244290

KEYWORDS: Sensors, Water, Printing, Manufacturing, Inkjet technology, Metals, Electrodes, Silver, Carbon, Design for manufacturability

Read Abstract +

Proceedings Article | 18 March 2016 Presentation + Paper

Presentation + Paper

Blister pouches for effective reagent storage and release for low cost point-of-care diagnostic applications

Holger Becker, Suzanne Smith, Rene Sewart, Kevin Land, Pieter Roux, Claudia Gärtner

Proceedings Volume 9705, 97050F (2016) https://doi.org/10.1117/12.2217963

KEYWORDS: Microfluidics, Blood, Liquids, Point-of-care devices, Diagnostics, Lab on a chip, Manufacturing, Image processing, Crystals, BioMEMS, Actuators, Interfaces, Polymers, Statistical analysis

Read Abstract +

Proceedings Article | 9 March 2015 Paper

Paper

Sample to answer visualization pipeline for low-cost point-of-care blood cell counting

Suzanne Smith, Thegaran Naidoo, Kevin Land, Zandile Nxumalo, Philip Marais, Emlyn Davies, Louis Fourie, Pieter Roux, Hein Swart

Proceedings Volume 9332, 93320V (2015) https://doi.org/10.1117/12.2076751

KEYWORDS: Blood, Microfluidics, Visualization, Point-of-care devices, Statistical analysis, Microscopy, Visual analytics, Video processing, Video, Microscopes

Read Abstract +

Proceedings Article | 23 June 2014 Paper

Paper

Analysis system for characterisation of simple, low-cost microfluidic components

Suzanne Smith, Thegaran Naidoo, Zandile Nxumalo, Kevin Land, Emlyn Davies, Louis Fourie, Philip Marais, Pieter Roux

Proceedings Volume 9257, 92570J (2014) https://doi.org/10.1117/12.2065110

KEYWORDS: Blood, Microfluidics, Visualization, Actuators, Point-of-care devices, Statistical analysis, Microscopy, Image visualization, Imaging systems, Diagnostics

Read Abstract +

There is an inherent trade-off between cost and operational integrity of microfluidic components, especially when intended for use in point-of-care devices. We present an analysis system developed to characterise microfluidic components for performing blood cell counting, enabling the balance between function and cost to be established quantitatively. Microfluidic components for sample and reagent introduction, mixing and dispensing of fluids were investigated. A simple inlet port plugging mechanism is used to introduce and dispense a sample of blood, while a reagent is released into the microfluidic system through compression and bursting of a blister pack. Mixing and dispensing of the sample and reagent are facilitated via air actuation. For these microfluidic components to be implemented successfully, a number of aspects need to be characterised for development of an integrated point-of-care device design. The functional components were measured using a microfluidic component analysis system established in-house. Experiments were carried out to determine: 1. the force and speed requirements for sample inlet port plugging and blister pack compression and release using two linear actuators and load cells for plugging the inlet port, compressing the blister pack, and subsequently measuring the resulting forces exerted, 2. the accuracy and repeatability of total volumes of sample and reagent dispensed, and 3. the degree of mixing and dispensing uniformity of the sample and reagent for cell counting analysis. A programmable syringe pump was used for air actuation to facilitate mixing and dispensing of the sample and reagent. Two high speed cameras formed part of the analysis system and allowed for visualisation of the fluidic operations within the microfluidic device. Additional quantitative measures such as microscopy were also used to assess mixing and dilution accuracy, as well as uniformity of fluid dispensing - all of which are important requirements towards the successful implementation of a blood cell counting system.

Proceedings Article | 23 June 2014 Paper

Paper

Tailoring the mechanical properties of SU-8/clay nanocomposites: polymer microcantilever fabrication perspective

Hao Chen, Vincent Ojijo, Hastings Cele, Trudi Joubert, Sinha Ray Suprakas, Kevin Land

Proceedings Volume 9257, 92570B (2014) https://doi.org/10.1117/12.2066315

KEYWORDS: Composites, Nanocomposites, Polymers, Ultraviolet radiation, Sensors, Polymeric sensors, Nanoparticles, Transmission electron microscopy, Nanolithography, Carbon

Read Abstract +

Proceedings Article | 23 June 2014 Paper

Paper

Fabrication of a multiplexed microfluidic system for scaled up production of cross-linked biocatalytic microspheres

Mesuli Mbanjwa, Hao Chen, Louis Fourie, Sibusiso Ngwenya, Kevin Land

Proceedings Volume 9257, 92570M (2014) https://doi.org/10.1117/12.2065809

KEYWORDS: Microfluidics, Particles, Proteins, Multiplexing, Glasses, Manufacturing, Photomasks, Oxygen, Plasma, Industrial chemicals

Read Abstract +

Showing 5 of 16 publications

SIGN IN TO:

View contact details

UPDATE YOUR PROFILE

Is this your profile? Update it now.

Sign into your SPIE.org account

Don’t have a profile and want one?

Create an account on SPIE.org

Advertisement

Advertisement