Mr. Lei Wang Profile

Lei Wang

at Hefei Univ of Technology

SPIE Involvement:

Author

Publications (3)

Proceedings Article | 10 October 2013 Paper

Variable stiffness and damping semi-active vibration control technology based on magnetorheological fluids

Shiyu Zhao, Huaxia Deng, Jin Zhang, ShuaiShuai Sun, Weihua Li, Lei Wang

Proceedings Volume 8916, 89160I (2013) https://doi.org/10.1117/12.2035903

KEYWORDS: Vibration control, Control systems, Magnetism, Active vibration control, Precision measurement, Systems modeling, Laser induced breakdown spectroscopy, Optoelectronics, Mechatronics, Analytical research

Read Abstract +

Proceedings Article | 16 May 2007 Paper

New compact rotationally symmetric triangulation sensor with low-cost plastic optics

Johannes Eckstein, Gao Jun, Peter Ott, Wang Lei, Wang Xiaojia

Proceedings Volume 6585, 65850T (2007) https://doi.org/10.1117/12.722896

KEYWORDS: Sensors, Optical design, Optics manufacturing, Reflectivity, Lenses, Manufacturing, Imaging systems, Distance measurement, System integration, Diamond turning

Read Abstract +

Classical triangulation sensors are wildly used but they have some typical drawbacks. The measurement result depends always on the angular orientation of the sensor what can be especially troublesome at steps or gaps. To eliminate this disadvantage of the classical triangulation we introduced in [1] a new kind of optical triangulation - the rotationally symmetric triangulation sensor. Therefore the measurement result depends not any longer on the angular orientation of the sensor. This is achieved by imaging the scattered light from an illuminated object point to a centered and sharp ring on a low cost area detector. The diameter of the ring is proportional to the distance of the object. The theoretical limit of the measurement uncertainty of the rotationally symmetric triangulation sensor is 3 to 4 times lower than the limit of the classical triangulation [2] for comparable and application oriented designs, because a complete ring is used for distance evaluation instead of only a point. In this contribution we show for the first time a design and a corresponding hardware which is completely realized by two toriodal formed aspherical plastic lenses. These lenses can be manufactured by injection molding for approximately the same costs than ordinary aspherical plastic lenses. So it is possible to realize this new sensor for the same price than a classical triangulation sensor but with higher accuracy and a much better robustness. For the rotationally symmetric triangulation sensor a standard 2D detector is used, the same detector like in standard vision systems. Additionally it is stressed that close to the axis of toriodal lenses is enough available design space to add a second optical system to image the object. The toriodal lenses allow to realize a retrofocus typ of imaging system without increasing the number of optical elements. However, in the middle of the lenses the surfaces are used for imaging and on the outer section they are used for triangulation. These two multipurpose optical elements can still be manufactured by injection moulding. To summarize, we show a low cost system with only one standard 2D detector and two aspheric lenses that realizes two tasks, i.e. imaging the object on the detector and distance measurement by rotationally symmetric triangulation.

Proceedings Article | 22 April 2006 Paper

Rotationally symmetric triangulation sensor with integrated object imaging using only one 2D detector

Johannes Eckstein, Wang Lei, Jonathan Becker, Gao Jun, Peter Ott

Proceedings Volume 6189, 61890J (2006) https://doi.org/10.1117/12.662575

KEYWORDS: Sensors, Distance measurement, Imaging systems, Optics manufacturing, Light emitting diodes, Optical design, Mirrors, Integrated optics, System integration, Light scattering

Read Abstract +

In this paper a distance measurement sensor is introduced, equipped with two integrated optical systems, the first one for rotationally symmetric triangulation and the second one for imaging the object while using only one 2D detector for both purposes. Rotationally symmetric triangulation, introduced in [1], eliminates some disadvantages of classical triangulation sensors, especially at steps or strong curvatures of the object, wherefore the measurement result depends not any longer on the angular orientation of the sensor. This is achieved by imaging the scattered light from an illuminated object point to a centered and sharp ring on a low cost area detector. The diameter of the ring is proportional to the distance of the object. The optical system consists of two off axis aspheric reflecting surfaces. This system allows for integrating a second optical system in order to capture images of the object at the same 2D detector. A mock-up was realized for the first time which consists of the reflecting optics for triangulation manufactured by diamond turning. A commercially available appropriate small lens system for imaging was mechanically integrated in the reflecting optics. Alternatively, some designs of retrofocus lens system for larger field of views were investigated. The optical designs allow overlying the image of the object and the ring for distance measurement in the same plane. In this plane a CCD detector is mounted, centered to the optical axis for both channels. A fast algorithm for the evaluation of the ring is implemented. The characteristics, i.e. the ring diameter versus object distance shows very linear behavior. For illumination of the object point for distance measurement, the beam of a red laser diode system is reflected by a wavelength bandpath filter on the axis of the optical system in. Additionally, the surface of the object is illuminated by LED's in the green spectrum. The LED's are located on the outside rim of the reflecting optics. The scattered LED light is transmitted by the before mentioned bandpath filter and is captured by the imaging lens. A simultaneous mode, in which the ring for distance measurement is superimposed to the image of the object, and a time multiplexing mode were implemented thus demonstrating the flexibility and performance options of this approach.

View contact details

UPDATE YOUR PROFILE

Is this your profile? Update it now.

Sign into your SPIE.org account

Don’t have a profile and want one?

Create an account on SPIE.org

Keywords/Phrases

Search In:

Publication Years