Ms. Mélanie Cloutier Profile

Mélanie Cloutier

Cleanroom Technician at Univ de Sherbrooke

SPIE Involvement:

Author

Publications (3)

Proceedings Article | 11 May 2010 Paper

3D harnessing of light with photon cage

C. Sieutat, J. L. Leclercq, X. Letartre, S. Callard, M. Gendry, G. Grenet, K. Naji, P. Regreny, P. Rojo-Romeo, P. Viktorovitch, G. Beaudin, M. Cloutier, D. Drouin, V. Aimez

Proceedings Volume 7712, 77120E (2010) https://doi.org/10.1117/12.854428

KEYWORDS: Optical microcavities, Photonic crystals, Waveguides, Nanophotonics, Silicon, Reflectivity, Nanotechnology, Waveguide modes, Mirrors, Nanowires

Read Abstract +

Proceedings Article | 20 May 2004 Paper

Evaporated resist for the fabrication and replication of LEEPL mask

Melanie Cloutier, Yousef Awad, Eric Lavallee, David Turcotte, Jacques Beauvais, Dominique Drouin, Lau Kien Mun, Pan Yang, Pierre Lafrance, Ron Legario, Akira Yoshida, Hiroshi Nozue

Proceedings Volume 5374, (2004) https://doi.org/10.1117/12.535747

KEYWORDS: Photomasks, Charged-particle lithography, Etching, Electron beam lithography, Reactive ion etching, Mask making, Nickel, Optical lithography, Plating, Lithography

Read Abstract +

Proceedings Article | 14 May 2004 Paper

Nanopatterning on fragile or 3D surfaces with sterol based vapour deposited electron beam resist

Ron Legario, Prasad Kelkar, Jacques Beauvais, Eric Lavallee, Dominique Drouin, Melanie Cloutier, David Turcotte, Pan Yang, Lau Mun, Yousef Awad, Pierre Lafrance

Proceedings Volume 5376, (2004) https://doi.org/10.1117/12.535775

KEYWORDS: Electron beam lithography, Photomasks, Semiconductor lasers, Lithography, Coating, Etching, Silicon, Zone plates, Semiconducting wafers, Electron beams

Read Abstract +

A novel and effective approach to nano-fabrication lithography is the vapour deposition of the negative tone electron beam resists QSR-5 and QSR-15 (Quantiscript’s sterol based resist) onto a substrate. Vapour deposition is especially conducive for patterning thin delicate membranes (e.g. advanced masks for X-ray lithography - XRL, and Low Energy Electron Proximity Projection Lithography - LEEPL), that are susceptible to breakage during the spin coating process. With the capability for depositing highly uniform thin layers (<50nm) and a demonstrated resolution better than 60nm, QSR-5 and QSR-15 have potential for the fabrication of next generation lithography masks. Optimized for low energy electron exposure where proximity effects become negligible and thus well suited for 1X lithography mask patterning, QSR-5 and QSR-15 have shown exposure doses as low as 100μC/cm² at 3KeV. In addition to this type of application, the versatility of QSR-5 and QSR-15 have also been demonstrated by the fabrication of a Fresnel zone plate lens on the tip of an optical fibre with the goal of improving the coupling of diode laser emission into the fiber. This application clearly shows the capabilities of this process for producing nano-scale patterns on very small area surfaces that are completely unsuitable for spin-coating of the resist. A second demonstration of the resist's capabilities is the patterning of optical diffractive elements directly on the facet of a semiconductor laser. This opens the way to direct patterning on laser diode facets in order to control the emission profile from the device. It has also proven capabilities in the manufacture of delicate photo masks. In their natural state, QSR-5 and QSR-15 are solids at room temperature and are sterol based heterocyclic compounds, with unsaturated bonding capable of cross linking. On their own merit, QSR-5 and QSR-15 are capable of cross linking under electron beam exposure and are comparable in certain properties to conventional spin-coated resists such as PMMA. When cross linked, their heterocyclic structure gives it excellent selective resistance to solvent based developers (such as alcohols and ketones) for pattern formation. They have also been shown to be highly resistant to etching solutions, even when working with thin high resolution layers on the order of 30 nm. They are highly stable and have a relatively long shelf life, greater than one year. Compared to conventional resists utilizing complex, toxic, and expensive resin systems, QSR-5 and QSR-15 are non-toxic and significantly cost effective. Before evaporation, the resists are in a powder state that allows for direct evaporation and sublimation onto a target substrate that contributes to film uniformity and capabilities for a very thin film; the powder state allows for a wide degree of adjustment in temperature of the vapour chamber, as a means to achieving the desired film thickness and uniformity.

View contact details

UPDATE YOUR PROFILE

Is this your profile? Update it now.

Sign into your SPIE.org account

Don’t have a profile and want one?

Create an account on SPIE.org

Keywords/Phrases

Search In:

Publication Years