Dr. Nadezhda D. Tolstoba Profile

Dr. Nadezhda D. Tolstoba

at ITMO Univ

SPIE Involvement:

Author

Publications (29)

Proceedings Article | 12 September 2021 Poster + Paper

Hyperspectral camera development on an unmanned aerial vehicle

Nadezhda Tolstoba, Maksim Gorelik

Proceedings Volume 11866, 1186611 (2021) https://doi.org/10.1117/12.2601697

KEYWORDS: Cameras, Unmanned aerial vehicles, Tolerancing, Remote sensing, Optical components, Spectral resolution, Objectives, Resistance, Imaging systems, Diffraction gratings

Read Abstract +

At present, spectral instruments have become widespread in various spheres of human activity, with their help it becomes possible to obtain information on the distribution of the intensity of radiation arriving at the input of the instrument from the object under study, over wavelengths. One of the possible methods for obtaining spectral information is hyperspectral imaging. A hyperspectral image is a three-dimensional data array in which each pair of spatial coordinates is associated with a set of values distributed over the spectrum. Thus, a hyperspectral camera provides complete information about the spatial and spectral structure of the object of observation. Also, the field of application of hyperspectral imaging is remote sensing of the Earth. Remote sensing is widely used in various spheres of human activity, such as surface monitoring, geodetic surveys, and agriculture. In addition to spectral research, remote sensing of the Earth uses other optical observation methods (such as LIDAR technology), radar and acoustic instruments. Unmanned aerial vehicles (UAVs) are used for regular monitoring. The advantage of unmanned launches is that they are significantly less expensive than manned flights. The main type of UAV currently used to solve a wide range of tasks is a quadrocopter. weight reduction is one of the important requirements in the development of wearable equipment for unmanned aerial vehicles. Another factor that determines the suitability of the instrument design for use in an aircraft is the structural rigidity and its resistance to vibrations arising from the operation of the engines. Minimizing the mass and increasing the rigidity and vibration resistance of the structure are two main requirements, in addition to ensuring the optical design requirements, which must be borne in mind when developing the design of a hyperspectral camera for installation on a quadcopter. The aim of this work is to develop a design for a hyperspectral camera. The design should provide the ability to install the system on a quadcopter.

Proceedings Article | 7 September 2021 Poster + Paper

Development of the optical scheme and design of a solar sculptural composition for installation on a city street

Nadezhda Tolstoba, Yana Bezhoo, Mikhael Bernikov

Proceedings Volume 11815, 1181510 (2021) https://doi.org/10.1117/12.2598329

KEYWORDS: Mirrors, Sun, Solar energy, Optical design, Visualization, Geometrical optics, Combustion

Read Abstract +

Proceedings Article | 14 September 2018 Paper

Development of the structural scheme of an amateur portable projection device for a premise design

Diana Nurpeisova, Nadezhda Tolstoba

Proceedings Volume 10742, 107421C (2018) https://doi.org/10.1117/12.2320714

KEYWORDS: Projection systems, Light emitting diodes, Projection devices, Light sources, Light sources and illumination, Optical design

Read Abstract +

Proceedings Article | 15 June 2018 Paper

The matters of producing optical elements for educational purposes

Maria Orekhova, Daria Butova, Nadezhda Tolstoba, Anastasia Kozhina, Ksenia Zavatskaya, Dmitry Lyamets, Alina Belyaeva, Diana Nurpeisova

Proceedings Volume 10692, 106921G (2018) https://doi.org/10.1117/12.2313914

KEYWORDS: Optical components, Prisms, Optics manufacturing, Manufacturing, Polishing, Polymers, Epoxies, Optical design, Glasses, Silicon

Read Abstract +

Proceedings Article | 5 June 2018 Paper

Options of lightweight mirror design and mounting such mirrors in telescope

Darya Butova, Nadezhda Tolstoba, Alexander Fleysher, Valentina Starichenkova

Proceedings Volume 10690, 106902I (2018) https://doi.org/10.1117/12.2312448

KEYWORDS: Mirrors, Lightweight mirrors, Space telescopes, Telescopes, Silicon carbide, Optical instrument design, Manufacturing, Fiber reinforced polymers, Space mirrors

Read Abstract +

Proceedings Article | 5 June 2018 Paper

Development of software for production of design documentation for aspherical optical components

Anastasiya Kozhina, Nadezhda D. Tolstoba

Proceedings Volume 10690, 106902F (2018) https://doi.org/10.1117/12.2312258

KEYWORDS: Software development, Aspheric lenses, Optical components, Algorithm development, Tolerancing, Optical spheres, Zemax, Optical design

Read Abstract +

Proceedings Article | 28 May 2018 Paper

Computer vision system selection for control of rapid prototyping processes

Daniil V. Izmaylov, Nadezhda Tolstoba, Kirill Bodrov

Proceedings Volume 10695, 106950Q (2018) https://doi.org/10.1117/12.2313959

KEYWORDS: Cameras, 3D printing, Printing, Control systems, 3D modeling, Digital cameras, Defect detection

Read Abstract +

Proceedings Article | 16 August 2017 Open Access

Online course Geometrical Optics for undergraduate students

Alexey Bakholdin, Anna Voznesenskaya, Galina Romanova, Tatiana Ivanova, Nadezhda Tolstoba, Kseniia Ezhova, Aleksei Garshin, Oleg Trifonov, Dmitry Sazonenko, Alisa Ekimenkova

Proceedings Volume 10452, 104521S (2017) https://doi.org/10.1117/12.2266491

KEYWORDS: Geometrical optics, Optical engineering, Optical components

Read Abstract +

DOWNLOAD PAPER

Proceedings Article | 16 August 2017 Open Access

Design and implementation of a modular interactive labyrinth targeted for use in optical education

Azaliya Saitgalina, Nadezhda Tolstoba, Daria Butova, Maria Orekhova, Dmitry Lyamets, Anastasiia Kozhina, Vladimir Kolomoitcev, Denis Shevchenko, Renata Krivtcova, Maksim Stepanenko, Kirill Kochnev, Alina Beliaeva

Proceedings Volume 10452, 104524D (2017) https://doi.org/10.1117/12.2266687

KEYWORDS: Photonics, Analytical research, Mirrors, Sensors, Detector development

Read Abstract +

DOWNLOAD PAPER

Proceedings Article | 16 February 2017 Paper

Optimization of the parameters of space-based mirrors

D. Butova, N. Tolstoba, A. Fleysher, M. Orekhova

Proceedings Volume 10100, 101001M (2017) https://doi.org/10.1117/12.2251230

KEYWORDS: Mirrors, Lightweight mirrors, Space telescopes, Telescopes, Silicon carbide, Space mirrors, Mirror structures, Control systems, Manufacturing, Reflectivity, Image quality

Read Abstract +

Proceedings Article | 28 September 2016 Paper

Development of methods for accurate modeling of optical equipment for three-dimensional printing

A. Saitgalina, N. Tolstoba, A. Mitiushkin

Proceedings Volume 9947, 994715 (2016) https://doi.org/10.1117/12.2237440

KEYWORDS: 3D printing, 3D modeling, Printing, Instrument modeling, Optical components, Light emitting diodes, Manufacturing, Optics manufacturing, Additive manufacturing, Analytical research

Read Abstract +

Proceedings Article | 27 September 2016 Open Access

Practical training: from ideas to optical devices

Nadezhda Tolstoba, Anna Voznesenskaya, Maria Orekhova

Proceedings Volume 9946, 994614 (2016) https://doi.org/10.1117/12.2238027

KEYWORDS: Optical components, Analytical research, Optical engineering, Cameras, Light sources, Lenses, Optical design, Telescopes, Photonics, Optical fabrication

Read Abstract +

DOWNLOAD PAPER

Proceedings Article | 27 September 2016 Open Access

Discover the power of light: student research laboratory for optical engineering at ITMO University

N. Tolstoba, A. Saitgalina

Proceedings Volume 9946, 994611 (2016) https://doi.org/10.1117/12.2237423

KEYWORDS: Optical engineering, Analytical research, Microscopes, Prisms, Tissue optics, Projection systems, Geometrical optics, Optical properties, Refraction, Endoscopy

Read Abstract +

DOWNLOAD PAPER

Proceedings Article | 27 September 2016 Open Access

Short educational programs in optical design and engineering

Anna Voznesenskaya, Galina Romanova, Alexey Bakholdin, Nadezhda Tolstoba, Kseniia Ezhova

Proceedings Volume 9946, 994619 (2016) https://doi.org/10.1117/12.2237181

KEYWORDS: Optical engineering, Optical design, Image processing, Optical components, Optical design, Computer aided design, Optical mounts, Image quality, Optical instrument design, Systems modeling, Objectives

Read Abstract +

DOWNLOAD PAPER

Proceedings Article | 27 September 2016 Open Access

Educational area for learning of optics and technologies: union of open laboratories of ideas, methods and practices (OLIMP)

Maksim Ivashchenko, Kirill Bodrov, Nadezhda Tolstoba

Proceedings Volume 9946, 994613 (2016) https://doi.org/10.1117/12.2238002

KEYWORDS: Robotics, Profiling, 3D modeling, Analytical research, Optical engineering, Structural design, Optical spheres, Rapid manufacturing, Information technology, Lead

Read Abstract +

DOWNLOAD PAPER

Proceedings Article | 18 August 2016 Paper

Development of the space telescope mirror construction

D. Butova, N. Tolstoba, A. Fleysher, V. Starichenkova

Proceedings Volume 9911, 99111P (2016) https://doi.org/10.1117/12.2232079

KEYWORDS: Space telescopes, Mirrors, Telescopes, Space mirrors, Lightweight mirrors, Space telescopes, Telescopes, Silicon carbide, Finite element methods, Systems modeling, Device simulation, Reflectivity

Read Abstract +

Proceedings Article | 27 April 2016 Paper

Research of limits of applicability of an open-source equipment for development the optical equipment kit

Azaiya Saitgalina, Anthon Mityushkin, Nadezhda Tolstoba

Proceedings Volume 9889, 98891W (2016) https://doi.org/10.1117/12.2227869

KEYWORDS: 3D printing, Optical engineering, 3D modeling, Optical components, Instrument modeling, Optics manufacturing, Optical design, Optical mounts, Manufacturing

Read Abstract +

Proceedings Article | 27 April 2016 Paper

Comparing and analysis of design lightweight large mirrors for space basing

Polina Abdula, Nadezhda Tolstoba

Proceedings Volume 9889, 98891X (2016) https://doi.org/10.1117/12.2227889

KEYWORDS: Optical instrument design, Mirrors, Space telescopes, Space mirrors, Lightweight mirrors, Silicon, Composites, Titanium, Metals, Glasses

Read Abstract +

Proceedings Article | 8 October 2015 Open Access

Experience of final examination for master’s degree in optical engineering

Tatiana Ivanova, Kseniia Ezhova, Alexey Bakholdin, Nadezhda Tolstoba, Galina Romanova

Proceedings Volume 9793, 97932O (2015) https://doi.org/10.1117/12.2223232

KEYWORDS: RGB color model, CMYK color model, Image filtering, Optical engineering, Digital filtering, Electronic filtering, Computer simulations, Holograms, Point spread functions, Astatine

Read Abstract +

DOWNLOAD PAPER

Proceedings Article | 8 October 2015 Open Access

Student research laboratory for optical engineering

Nadezhda Tolstoba, Azaliya Saitgalina, Polina Abdula, Daria Butova

Proceedings Volume 9793, 97931Y (2015) https://doi.org/10.1117/12.2223186

KEYWORDS: Optical engineering, Analytical research, Information technology, Optical components, Prisms, Scientific research, Mechanics, Atmospheric optics, Prototyping, Electronic circuits

Read Abstract +

DOWNLOAD PAPER

Proceedings Article | 8 October 2015 Open Access

Double degree master program: Optical Design

Alexey Bakholdin, Malgorzata Kujawinska, Irina Livshits, Adam Styk, Anna Voznesenskaya, Kseniia Ezhova, Elena Ermolayeva, Tatiana Ivanova, Galina Romanova, Nadezhda Tolstoba

Proceedings Volume 9793, 979307 (2015) https://doi.org/10.1117/12.2223055

KEYWORDS: Optical design, Optical engineering, Optics manufacturing, Internships, Optical testing, Mechatronics, Photonics, Software, Computer simulations, Optical metrology

Read Abstract +

DOWNLOAD PAPER

Proceedings Article | 8 October 2015 Open Access

Collaboration between applied and computer optics department of ITMO University with industry’s leading manufacturers

Alexey Bakholdin, Kseniia Ezhova, Anna Voznesenskaya, Tatiana Ivanova, Galina Romanova, Nadezhda Tolstoba

Proceedings Volume 9793, 97932F (2015) https://doi.org/10.1117/12.2223214

KEYWORDS: Optics manufacturing, Optical design, Optical components, Computer aided design, Optoelectronics, Optical engineering, Algorithm development, Systems modeling, Optical instrument design, Software development

Read Abstract +

DOWNLOAD PAPER

Proceedings Article | 21 June 2015 Paper

Simulation and analysis of lightweight space mirror design

Polina Abdula, Mikhail Neutov, Nadezhda Tolstoba

Proceedings Volume 9526, 95261N (2015) https://doi.org/10.1117/12.2184854

KEYWORDS: Mirrors, Space telescopes, Space mirrors, Telescopes, Beryllium, Image quality, Metals, Glasses, Silicon carbide, Earth's atmosphere

Read Abstract +

Proceedings Article | 1 May 2014 Paper

Automation of data pre-processing at the control of optical systems by the Hartmann technique

N. Tolstoba, V. Malutin, G. Yakopov, E. Emelianov

Proceedings Volume 9131, 91311P (2014) https://doi.org/10.1117/12.2051999

KEYWORDS: Neodymium, Control systems, Scattering, Algorithm development, Image processing, Electroluminescence, Ions, Sensors, Detection and tracking algorithms, Image analysis

Read Abstract +

Proceedings Article | 27 December 2001 Paper

Analysis of Hartmann testing techniques for large-sized optics

Nadezhda Tolstoba

Proceedings Volume 4451, (2001) https://doi.org/10.1117/12.453650

KEYWORDS: Mirrors, Sensors, Microlens array, Charge-coupled devices, Microlens, Raster graphics, Photomasks, Wavefront sensors, Objectives, Stars

Read Abstract +

Proceedings Article | 14 December 2001 Paper

Automation of the construction creation process of the optical instrument and creations of designer documentation

Nadezhda Tolstoba, Nikolay Voznesensky, Olga Delnova, Anna Voznesenskya

Proceedings Volume 4487, (2001) https://doi.org/10.1117/12.450422

KEYWORDS: Computer aided design, Optical components, Optical design, Optics manufacturing, Optical instrument design, Software development, Chemical elements, Tolerancing, Mechanics, Mechanical engineering

Read Abstract +

Proceedings Article | 26 November 2001 Paper

Determination of aberrations by processing lenslet array image located on the CCD receiver

Nadezhda Tolstoba

Proceedings Volume 4473, (2001) https://doi.org/10.1117/12.492768

KEYWORDS: Charge-coupled devices, Algorithm development, Image processing, Receivers, Mathematical modeling, Imaging arrays, Microlens array, Data modeling, Astronomical imaging, Optical testing

Read Abstract +

Proceedings Article | 29 October 1999 Paper

Gram-Schmidt technique for aberration analysis in telescope mirror testing

Nadezhda Tolstoba

Proceedings Volume 3785, (1999) https://doi.org/10.1117/12.367612

KEYWORDS: Mirrors, Chromatic aberrations, Telescopes, Wavefronts, Zernike polynomials, Astronomical imaging, Optical testing, Error analysis, Astronomical telescopes, Observatories

Read Abstract +

Proceedings Article | 27 September 1999 Paper

Principles and software for photolithographic optical system alignment and tolerancing

Sergey Rodionov, Nikolay Voznesensky, Nadezhda Tolstoba, Dmitry Gavrilin, Georgy Tychonchuk

Proceedings Volume 3780, (1999) https://doi.org/10.1117/12.363775

KEYWORDS: Monochromatic aberrations, Tolerancing, Distortion, Wavefronts, Optical alignment, Optical lithography, Lenses, Wavefront aberrations, Manufacturing, Matrices

Read Abstract +

Showing 5 of 29 publications

View contact details

UPDATE YOUR PROFILE

Is this your profile? Update it now.

Sign into your SPIE.org account

Don’t have a profile and want one?

Create an account on SPIE.org

Keywords/Phrases

Search In:

Publication Years