Dr. Xue Pan Profile

Dr. Xue Pan

at Shanghai Institute of Optics and Fine Mechanics CAS

SPIE Involvement:

Author

Publications (8)

Proceedings Article | 22 December 2023 Paper

Development of thin disk gain medium based on photoadhesion technology

Zuqiang Li, Qi Xiao, Xue Pan, Xinghua Lu, Jiangfeng Wang, Youen Jiang, Wei Fan, Xuechun Li

Proceedings Volume 12974, 129740K (2023) https://doi.org/10.1117/12.3015320

Read Abstract +

Proceedings Article | 15 December 2022 Paper

Optical fiber dispersion measurements based on spectral shaping and frequency-to-time mapping

Min Fu, Youen Jiang, Qi Xiao, Xue Pan, Li Zhou, Xuechun Li, Jianqiang Zhu

Proceedings Volume 12478, 1247824 (2022) https://doi.org/10.1117/12.2654704

KEYWORDS: Spatial light modulators, Optical fibers, Modulation, Optical testing, Light sources, Dispersion, Data modeling, Spectral resolution, Pulsed laser operation

Read Abstract +

Proceedings Article | 6 June 2021 Paper

The study of frequency domain optical parametric amplification technology

Qi Xiao, Xue Pan, Xinghua Lu, Zijian Cui, Wei Fan, Xuechun Li

Proceedings Volume 11849, 118490D (2021) https://doi.org/10.1117/12.2598449

Read Abstract +

Proceedings Article | 18 April 2021 Presentation + Paper

Laser-induced damage resistance enhancement of fused silica optics by rapid laser micromachining

Li Zhou, Youen Jiang, Hui Wei, Peng Zhang, Xue Pan, Wei Fan, Xuechun Li

Proceedings Volume 11777, 117770T (2021) https://doi.org/10.1117/12.2587023

KEYWORDS: Laser optics, Silica, Micromachining, Laser induced damage, Resistance, Laser systems engineering, Laser processing, Laser damage threshold, High power lasers, Femtosecond phenomena

Read Abstract +

The issue of laser-induced damage on critical components emerges as a bottleneck that limits the high-power or high-energy laser systems, especially for the fused silica optics used in ultraviolet light. Sub-surface defects such as microcracks and impurities on fused silica optics have been discovered as damage precursors and determine the laser-induced damage threshold (LIDT) of the optics. Under the state-of-the-art advanced mitigation processes (AMP) and laser conditioning, only a few destructive damage sites that grow rapidly with successive shots still exist on a large-aperture fused silica optic. Therefore, we propose a method of selectively eliminating the destructive damage sites on fused silica optics by laser micromachining and consequently lead to a significant enhancement of LIDT in this paper. The removal of a damage site is implemented by precisely shaping the destructive damage site into an optically benign cone of special design using a femtosecond laser, with a subsequent CO₂-laser-polishing process to reduce the roughness. Compared with previous methods, the thermal effect on the processed region is dramatically reduced because of the nonthermal ablation by a femtosecond laser. Through optimizing the parameters of laser micromachining, a typical damage site is eliminated and replaced with a designed cone of excellent quality. The manufactured cone typically has a smooth wall with a slope angle of 12°, a diameter of 800 μm, and a negligible raised rim with a height of 14.5 nm (∼ λ/25 @ 355 nm). By employing the raster scan LIDT test procedure, several fused silica optics processed by laser micromachining are investigated and a laser-induced damage threshold (@ 355 nm, 1.6 ns) higher than 14 J/cm² and 10 J/cm² on the input surface and output surface are discovered, respectively. Furthermore, the downstream light intensification is proven to be trivial in the absence of a detrimental high-intensity central spot, owing to the ultra-low raised rim. These results demonstrate that rapid laser micromachining is an effective way to improve laser-induced damage resistance of fused silica optics and eventually enhance the performance of high-power or high-energy laser systems.

Proceedings Article | 8 July 2019 Paper

Ablation characteristics of aluminum alloy and stainless steel induced by picosecond laser pulses

Wenfeng Liu, Mingying Sun, Yajing Guo, Zhaoyang Jiao, Rong Wu, Xue Pan

Proceedings Volume 11063, 110631B (2019) https://doi.org/10.1117/12.2539907

KEYWORDS: Laser ablation, Aluminum, Laser energy, Picosecond phenomena, Metals, Laser damage threshold, Pulsed laser operation, Laser systems engineering, High power lasers, Surface finishing

Read Abstract +

Proceedings Article | 1 August 2017 Paper

Comparison between intrinsic and contaminant-induced damages of multilayer dielectric gratings

Yanfei Hao, Mingying Sun, Shuang Shi, Xue Pan, Zhenghao Zhu, Xiangyang Pang, Jianqiang Zhu

Proceedings Volume 10339, 103390H (2017) https://doi.org/10.1117/12.2269753

KEYWORDS: Laser induced damage, Diffraction gratings, Particles, Laser energy, Optical components, Pollution, Dielectrics, Light scattering, Absorption, Diffraction

Read Abstract +

Proceedings Article | 18 November 2014 Paper

Spectral broadening and inhibition of amplitude and frequency modulation in Nd: glass regenerative amplifier

Yuqi Zhang, Xue Pan, Jiangfeng Wang, Xuechun Li

Proceedings Volume 9266, 926616 (2014) https://doi.org/10.1117/12.2074464

KEYWORDS: Frequency modulation, Optical amplifiers, Modulation, Pulsed laser operation, Amplifiers, Polarization, Quartz, Crystals, Fiber amplifiers, Laser crystals

Read Abstract +

Proceedings Article | 17 September 2013 Paper

High energy quadruple pass amplifier for high power laser preamplifier module

Yujie Peng, Jiangfeng Wang, Xue Pan, Xinghua Lu, Xuechun Li

Proceedings Volume 8904, 89040I (2013) https://doi.org/10.1117/12.2032802

KEYWORDS: Amplifiers, Optical amplifiers, Pulsed laser operation, High power lasers, Fusion energy, Near field, Glasses, Neodymium, Relays, Mirrors

Read Abstract +

Showing 5 of 8 publications

View contact details

UPDATE YOUR PROFILE

Is this your profile? Update it now.

Sign into your SPIE.org account

Don’t have a profile and want one?

Create an account on SPIE.org

Keywords/Phrases

Search In:

Publication Years