Dr. Pierre Laperle Profile

Dr. Pierre Laperle

at INO

SPIE Involvement:

Author

Publications (22)

Proceedings Article | 26 February 2018 Paper

Nonlinear compression for generation of high energy ultrashort pulses using an Yb-doped large mode area tapered fiber

V. Roy, L. Desbiens, M. Boivin, C. Paré, B. Labranche, P. Laperle, Y. Taillon

Proceedings Volume 10512, 105120Y (2018) https://doi.org/10.1117/12.2290104

KEYWORDS: Fiber amplifiers, Amplifiers, Ultrafast phenomena, Optical amplifiers, Cladding, Medium wave, Picosecond phenomena, Volume Bragg gratings, Oscillators, Modulation

Read Abstract +

Proceedings Article | 22 February 2017 Presentation + Paper

Yb-doped large mode area tapered fiber with depressed cladding and dopant confinement

V. Roy, C. Paré, B. Labranche, P. Laperle, L. Desbiens, Y. Taillon, M. Boivin

Proceedings Volume 10083, 1008314 (2017) https://doi.org/10.1117/12.2250864

KEYWORDS: Cladding, Ytterbium, Fiber amplifiers, Doping, Refractive index, Step index fibers, Amplifiers, Video, Signal attenuation, Absorption, Fiber lasers

Read Abstract +

Proceedings Article | 5 April 2016 Paper

Yb-doped large mode area fibers with depressed clad and dopant confinement

Vincent Roy, Claude Paré, Pierre Laperle, Louis Desbiens, Yves Taillon

Proceedings Volume 9728, 97281W (2016) https://doi.org/10.1117/12.2212770

KEYWORDS: Fiber amplifiers, Fiber lasers, Ytterbium, Cladding, Doping, Amplifiers, Light sources, Optical testing, Laser development, Optical fibers, Refractive index, Video, Waveguides, Optical filters

Read Abstract +

Proceedings Article | 14 October 2010 Paper

Fabrication method for LMA multi-cald Yb-doped silica PM fibers

Huimin Zheng, Mathieu Drolet, Yves Taillon, André Croteau, Steeve Morency, Pierre Laperle, Antoine Proulx, Claude Paré

Proceedings Volume 7839, 78390N (2010) https://doi.org/10.1117/12.867095

KEYWORDS: Optical fibers, Silica, Phase modulation, Fiber amplifiers, Birefringence, Refractive index, Cladding, Optical amplifiers, Indium oxide, Amplifiers

Read Abstract +

Proceedings Article | 23 September 2010 Paper

High-power fiber amplifier using a depressed-clad Yb-doped LMA fiber with low photodarkening

Mathieu Drolet, Antoine Proulx, Huimin Zheng, Pierre Laperle, Yves Taillon, Louis Desbiens, Claude Paré

Proceedings Volume 7750, 775018 (2010) https://doi.org/10.1117/12.872898

KEYWORDS: Monochromatic aberrations, Fiber amplifiers, Refractive index, Amplifiers, Optical filters, Ytterbium, Polarization, Fiber lasers, Fiber characterization, Sensors

Read Abstract +

Proceedings Article | 17 February 2010 Paper

Relations between phosphorus/aluminum concentration ratio and photodarkening rate and loss in Yb-doped silica fibers

Huimin Zheng, Louis Desbiens, Mathieu Drolet, Pierre Laperle, Antoine Proulx, Yves Taillon

Proceedings Volume 7580, 75801Y (2010) https://doi.org/10.1117/12.840026

KEYWORDS: Ytterbium, Phosphorus, Aluminum, Fiber amplifiers, Optical fibers, Ions, Fiber lasers, Sensors, Amplifiers, Laser systems engineering

Read Abstract +

Proceedings Article | 17 February 2010 Paper

High-power fiber amplifier using a PM Yb-doped photodarkening-resistant LMA fiber with depressed-clad index profile design

Huimin Zheng, Pierre Laperle, Yves Taillon, Antoine Proulx, Mathieu Drolet, Claude Paré

Proceedings Volume 7580, 75802M (2010) https://doi.org/10.1117/12.842583

KEYWORDS: Monochromatic aberrations, Fiber amplifiers, Phase modulation, Optical filters, Packaging, Polarization, Fiber lasers, Optical testing, Indium oxide, Aluminum

Read Abstract +

Proceedings Article | 5 August 2009 Paper

Optimization of signal gain and core composition for low photodegradation in Yb-doped fiber amplifiers

Louis Desbiens, Pierre Laperle, Karine Le Foulgoc, Antoine Proulx, Mathieu Drolet, Yves Taillon, Huimin Zheng, Pascal Deladurantaye

Proceedings Volume 7386, 73860P (2009) https://doi.org/10.1117/12.839323

KEYWORDS: Fiber amplifiers, Ytterbium, Signal attenuation, Aluminum, Amplifiers, Fiber lasers, Optimization (mathematics), Signal processing, Process modeling, Indium oxide

Read Abstract +

Proceedings Article | 5 August 2009 Paper

140-uJ, narrow-linewidth, robustly single-transverse mode nanosecond infrared fiber laser platform with fine pulse tailoring capability

Louis Desbiens, Vincent Roy, Pascal Deladurantaye, Pierre Laperle, Bruno Labranche, Yves Taillon, Mathieu Drolet

Proceedings Volume 7386, 73860Q (2009) https://doi.org/10.1117/12.839538

KEYWORDS: Oscillators, Solar energy, Laser development, Fiber amplifiers, Pulsed laser operation, Modulators, Photons, Nonlinear control, Semiconductor lasers, Modulation

Read Abstract +

The work presented in this paper had two main objectives. The first objective was to develop a very stable nanosecond infrared pulsed fiber laser oscillator platform offering a straightforward and accurate control over the pulse characteristics in the time domain. The second objective was to deliver what we call "high quality photons", which means delivering pulses with high energy and excellent beam quality and narrow spectral linewidth, all at the same time and with very good stability. Oscillators with such attributes find applications in material processing fields, for example in memory repair, photovoltaic cell processing or micro-milling, to name just a few. In order to achieve the first objective, an embedded digital platform using high-speed electronics was developed. Using this platform and a computer, pulse shapes have been programmed straightforwardly in the non-volatile memory of the instrument, with an amplitude resolution of 10 bits and a time resolution of 2.5 ns. Optical pulses having tailored temporal profiles, with rise times around 1 ns and pulse energy stability levels better than ± 3% at 3σ, have been generated at high repetition rates (> 100 kHz) at a wavelength of 1064 nm. Achieving the second objective required amplifying the low power master oscillator signal (10-100 mW) to output power levels in the range of 1 to 50 W. A multi-clad, polarization maintaining, Yb-doped large mode area fiber was specially designed to allow for the amplification of high peak power optical pulses, while keeping control over the nonlinear effects and preserving an excellent beam quality. Optical pulses with tailored shapes and pulse energy levels in excess of 140 μJ have been produced for pulse durations in the range of 10 to 80 ns, with 86% of the power emitted in a 0.5-nm bandwidth. The linearly polarized beam M² parameter was smaller than 1.1, with both the astigmatism and the asymmetry below 15%. The pulse energy stability was better than ± 3% at 3σ. We conclude with a discussion about some of the applications of the developed platform.

Proceedings Article | 19 February 2009 Paper

Modeling the photodegradation of large mode area Yb-doped fiber power amplifiers

Antoine Proulx, Pierre Laperle, Mathieu Drolet, Louis Desbiens, Yves Taillon, Karine Le Foulgoc, Pascal Deladurantaye

Proceedings Volume 7195, 71952C (2009) https://doi.org/10.1117/12.808189

KEYWORDS: Fiber amplifiers, Ytterbium, Signal attenuation, Color centers, Amplifiers, Fiber lasers, Indium oxide, Signal detection, Instrument modeling

Read Abstract +

Proceedings Article | 21 February 2007 Paper

Yb-doped LMA triple-clad fiber for power amplifiers

Pierre Laperle, Huimin Zheng, Claude Paré, André Croteau

Proceedings Volume 6453, 645308 (2007) https://doi.org/10.1117/12.699075

KEYWORDS: Doping, Fiber amplifiers, Optical amplifiers, Ytterbium, Signal detection, Scattering, Acoustics, Optical filters, Refractive index, Beam propagation method

Read Abstract +

Proceedings Article | 8 September 2006 Paper

Er3+ -Yb3+ co-doped phosphate glass optical fiber for application at 1.54 microns

André Croteau, Jean-Luc Soucy, André Parent, Cynthia Desrosiers, Steeve Morency, Pierre Laperle, Jocelyne Osouf, Christophe Lafond

Proceedings Volume 6343, 63430M (2006) https://doi.org/10.1117/12.707667

KEYWORDS: Glasses, Erbium, Absorption, Ytterbium, Fiber lasers, Optical fibers, Semiconductor lasers, Cladding, Refractive index, Sensors

Read Abstract +

Proceedings Article | 8 September 2006 Paper

Improvement in the beam quality of large-mode-area fiber amplifier output through fiber tapering

Claude Paré, Pierre Laperle, Yves Taillon

Proceedings Volume 6343, 63430T (2006) https://doi.org/10.1117/12.707702

KEYWORDS: Fiber amplifiers, Refractive index, Optical filters, Transformers, Multimode fibers, Indium oxide, High power fiber amplifiers, Raman scattering, Transform theory, Doping

Read Abstract +

Proceedings Article | 8 September 2006 Paper

Fiber laser pumped tunable Cr2+:ZnSe laser

Dany Lemieux, Bruno Labranche, Dina Lozofsky, Mathieu Drolet, Pierre Laperle, Yves Taillon, Daniel Cantin, Kennedy Nyairo

Proceedings Volume 6343, 634311 (2006) https://doi.org/10.1117/12.707682

KEYWORDS: Crystals, Fiber lasers, Chromium, Laser crystals, Absorption, Continuous wave operation, YAG lasers, Erbium, Laser resonators, Tunable lasers

Read Abstract +

Proceedings Article | 8 September 2006 Paper

Yb-doped LMA triple-clad fiber laser

Pierre Laperle, Claude Paré, Huimin Zheng, Yves Taillon, André Croteau

Proceedings Volume 6343, 63430X (2006) https://doi.org/10.1117/12.707712

KEYWORDS: Fiber lasers, Ytterbium, Laser damage threshold, Refractive index, Doping, Absorption, Silica, Optical amplifiers, Aluminum, Fluorine

Read Abstract +

Proceedings Article | 22 February 2006 Paper

Bending insensitive highly Yb-doped LMA triple-clad fiber for nearly diffraction-limited laser output

Yves Taillon, Huimin Zheng, Claude Paré, Pierre Laperle, André Croteau

Proceedings Volume 6101, 61010G (2006) https://doi.org/10.1117/12.674317

KEYWORDS: Fiber lasers, Fiber amplifiers, Ytterbium, Refractive index, Doping, Polarization, Optical amplifiers, Cladding, Silica, Aluminum

Read Abstract +

Proceedings Article | 17 February 2003 Paper

Ytterbium-doped fiber laser pumping of a thulium-doped ZBLAN blue fiber laser

Pierre Laperle, Dominic Faucher, Real Vallee

Proceedings Volume 4833, (2003) https://doi.org/10.1117/12.476263

KEYWORDS: Fiber lasers, Signal attenuation, Mirrors, ZBLAN, Upconversion, Laser damage threshold, Raman spectroscopy, Reflectivity, Absorption, Thulium

Read Abstract +