Dr. Scott McWhorter Profile

Dr. Scott McWhorter

Research Scientist at Savannah River National Lab

SPIE Involvement:

Author

Publications (2)

Proceedings Article | 7 December 2004 Paper

Isotopic hydrogen analysis via conventional and surface-enhanced fiber optic Raman spectroscopy

Robert Lascola, Kristine Zeigler, C. Scott McWhorter, Eliel Villa-Aleman, Laura Tovo, April Ward

Proceedings Volume 5586, (2004) https://doi.org/10.1117/12.571898

KEYWORDS: Raman spectroscopy, Surface enhanced Raman spectroscopy, Hydrogen, Raman scattering, Fiber optics, Silver, Scattering, Chemical analysis, Palladium, Metals

Read Abstract +

Proceedings Article | 3 May 1999 Paper

Nanoliter-scale sample preparation methods directly coupled to PMMA-based microchips and gel-filled capillaries for the analysis of oligonucleotides

Steven Soper, Sean Ford, Yichuan Xu, Shize Qi, Scott McWhorter, Suzzane Lassiter, Don Patterson, Richard Bruch

Proceedings Volume 3602, (1999) https://doi.org/10.1117/12.347538

KEYWORDS: Capillaries, Connectors, Polymethylmethacrylate, Luminescence, Information operations, Silica, Scintillation, Etching, Sensors, Polymers

Read Abstract +

We are currently developing miniaturized, chip-based electrophoresis devices fabricated in plastics for the high speed separation of oligonucleotides. One of the principal advantages associated with these devices is their small sample requirements, typically in the nanoliter to sub-nanoliter range. Unfortunately, most standard sample preparation protocols, especially for oligonucleotides, are done off-chip on a microliter-scale. Our work has focused on the development of capillary nano-reactors coupled to micro-separation platforms, such as micro-electrophoresis chips, for the preparation of sequencing ladders and also, PCR reactions. These nano-reactors consist of fused silica capillary tubes (length equals 10 - 20 cm; id equals 20 - 50 micrometer) with fluid pumping accomplished using the electro-osmotic flow generated by the tubes. These reactors were situated in fast thermal cyclers to perform cycle sequencing or PCR amplification of the DNAs. The reactors were interfaced to the micro-electrophoresis chips via capillary connectors micromachined in polymethylmethacrylate (PMMA) using deep X- ray etching (width equals 50 micrometer; depth equals 50 micrometer) and were situated directly on the PMMA-based microchip. This chip also contained an injector, separation channel (length equals 6 cm; width equals 30 micrometers; depth equals 50 micrometers) and a dual fiber optic, near- infrared fluorescence detector. The sequencing nano-reactor used surface immobilized templates attached to the wall via a biotin:streptavidin:biotin linkage produced by PCR using a biotinylated forward primer. Sequencing tracks could be directly injected into gel-filled capillary tubes with minimal degradation in the efficiency of the separation process. The nano-reactor could also be configured to perform PCR reactions by filling the capillary tube with the PCR reagents and template. After thermal cycling, the PCR cocktail could be injected into a capillary tube or a micro-chip device for fractionation. In all cases, the detection of the oligonucleotides was accomplished using ultra-sensitive near- IR fluorescence detection.

View contact details

UPDATE YOUR PROFILE

Is this your profile? Update it now.

Sign into your SPIE.org account

Don’t have a profile and want one?

Create an account on SPIE.org

Keywords/Phrases

Search In:

Publication Years