In the paper, we proposed a compact Korsch-type CubeSat telescope for optical remote sensing validation. The optical payload will be mounted on a 6U CubeSat named ONGLISAT. This telescope has an aperture of 92 mm and an effective focal length of 725 mm, providing a field of view of 2.2 degrees. The optical payload is equipped with a linear TDI CMOS image sensor, capable of capturing high-resolution panchromatic images with a ground sampling distance (GSD) of 2.8 meters in a low-Earth orbit at an altitude of 406 kilometers. The Korsch telescope consists of three aspheric mirrors (primary, secondary, and tertiary mirrors) as well as a roof mirror. This paper presents details of the optical design, assembly, integration, and performance test for the compact Korsch telescope. The image quality of the Korsch telescope is evaluated by the contrast transfer function (CTF). Finally, after thermal vacuum cycling testing and vibration testing, the telescope still maintains a CTF of 0.12 at 50 lp/mm line pairs. The Korsch telescope has the characteristics of a low obstruction ratio and high stray light blocking. The design of the telescope has higher resolution, a smaller size, and lower launch costs, which are beneficial for future applications in science, agriculture, commerce, and disaster relief. Furthermore, its optical quality can be quickly validated, serving as a preliminary study for larger telescopes.
In this paper, we propose a method for rapid calibration of long effective focal length collimators by the Ronchi test. Long effective focal length collimators were often used to calibrate remote sensing optical payloads or telescopes. In order to accurately verify optical system’s collimation, the effective focal length of the collimator must be at least three times longer than the optical system under test. Traditionally, people usually used interferometer to calibrate collimator. However, this method could accurately detect the collimation of the optical system, but the inspection process was quite complex and required a high-precision 6-axis moving platform to recode the interferometer position. Therefore, we propose a method for rapid calibration of long effective focal length collimators by the Ronchi test. The Ronchi test module was composed of a light source, a Ronchi ruling and a camera. We would use the module to verify the alignment of an optical system with a focal length of 10,500mm and a f-number of approximately 14.3. If the distance between the primary mirror and the secondary mirror would be the same as the ideal optical path, the position of the focal plane didn't change. By measuring changes in focal plane position, collimation could be quickly confirmed and adjusted. According to experiment results, the measurement error of the focal plane of this module is approximately ± 55 um. The collimator of emission angle error less than 1.75E-4 mrad. Form the above experiment results, the module could perform collimation verification at lower cost and faster speed. In the future, we could further reduce the measurement error by adding multi-wavelength light sources, gratings of different period frequencies and analyzing various interference fringe characteristics.
The iridescence green band and cyan tail of the wing on Papilio blumei butterfly were investigated. The bi-color phenomenon on the scales of butterfly wings was found and analyzed. The spectral change with thickness of chitin-air layers, width of air hole, total layer numbers and incident angle of light were simulated by FDTD method. 2D photonic-crystal model was applied to explain the change of reflectance spectra and color with angle. The replica of structural color and nanostructured thin films for Papilio blumei butterflies was fabricated successfully by three main techniques, PS spheres bedding, electron-beam gun evaporation and ICP etching.
KEYWORDS: Calibration, Optical filters, Sensors, Colorimetry, Error analysis, CIE 1931 color space, Principal component analysis, Photonics, Standards development, Human vision and color perception
Currently, the most popular instrument for chromaticity measurement consists of a power detector with several
color filters of transmission spectra approaching to the color matching functions from the CIE 1931 standard
observers. Unavoidably, there exist mismatches between the transmission spectrum of color filters and color
matching functions. Therefore, the calibration process is obviously very important to the accuracy and the precision
for the chromatic tri-stimulus values measurement in the colorimeters. In spite of several methods having
been developed for the calibration procedures, the correction condition is only set to one certain illumination
condition. Two most adapted standard illuminating conditions are the CIE standard illuminant D65 under correlated
color temperature (CCT) 6504K, and the CIE standard illuminant A under CCT 2856K. However, in
the general applications, the practical illuminating conditions for measurements are very difficult to be the same
as the calibration one. In this work, the impulse response analysis has been applied for the error analysis. From
the spectral mismatches of the color filters in colorimeters. A quantitative formula has thus been developed for
the evaluation of the correction for the chromatic tri-stimulus values due the mismatch of the color filters under
various CCT illumination condition. Based on this formula, the previously unknown deviation in the chromatic
measurement under different CCT condition now can be further reduced down. In summary, the filter-type colorimeters
with the calibration procedure according to our correction formula will perform much higher precision
but still keep its simple and convenient use.
This research intends to explore with a uniform color space based on the CIE 1931 x-y chromatic coordinate
system. The goal is to improve the non-uniformity of the CIE 1931 x-y chromaticity diagram such as to approach
the human color sensation as possible; however, its simple methodology still can be kept. In spite of the existence
of various kinds of the uniform color coordinate systems built up early (CIE u'-v', CIE Lab, CIE LUV, etc.), the
establishment of a genuine uniform color space is actually still an important work both for the basic research in
color science and the practical applications of colorimetry, especially for recent growing request in illumination
engineering and in display technology. In this study, the MacAdam ellipses and the Munsell color chips are
utilized for the comparison with the human color sensation. One specific linear transformation matrix is found
for the CIE 1931 color matching functions (see manuscript) to become the novel uniform ones. With the aid
of the optimization method, the transformation matrix can be easily discovered and makes the 25 MacAdam
ellipses are similar to each other in the novel uniform color space. On the other hand, the perfectiveness of the
equal-hue curves and the equal-chroma contours from the Mnusell color chips evaluates for the best optimization
conditions among several different definitions for the similarity of all the MacAdam ellipses. Finally, the color
difference between any two colors can be simply measured by the Euclidean distance in the novel uniform color
space and is still fitted to the human color sensation.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.