Curvilinear(CL) mask shapes have showed better lithography performance, including improved process window, better PVband and MEEF compared to Manhattan mask. With the development of Multi-Beam-Mask-Writer (MBMW), the adoption of CL mask in production becomes reality.
However, there are multiple challenges associated with CL data, such as complex mask shape and large data volume. One of the most important challenges is to have a good set of Mask-Rule-Check(MRC) rules which is essential to achieve good OPC mask quality.
Calibre® OPCVerify has been developed for years to check CL shapes. Combining with existing checks, a full suite of CL MRC checks has been added. In this paper, we will present a fully integrated CL verification flow.
Traditional approaches to quantifying stochastic EUVL variability for the use in stochastic-aware OPC correction and verification algorithms are tested against the stochastic EUVL via failure probability calculation by the Calibre stochastic model. The purpose is to check if these simplified approaches, based on the image metrics (e.g., NILS) or PV band parameters may provide an accurate failure probability prediction for a broad variety of layouts typical for the via layers of modern ICs. We also present the examples of verification of the Calibre stochastic model failure probability predictions against the brute force Monte Carlo trials.
The requirement of larger common overlap process window in EUV patterning is getting stronger when the design pitch continues to shrink. The reflective optics in EUV generate various imaging issues due to mask 3-dimensional (M3D) effects. Therefore, sub-resolution assistant features (SRAFs) insertion is preferred for the resolution enhancement technology. SRAFs insertion can create a dense optical environment that will prevent strong best focus shift between semi-isolated and isolated features. From the previous study, SRAFs insertion and stochastic printing can be modeled and verified with a flow utilizing a compact resist 3D model (R3D) in conjunction with stochastic model. In this work, additional SRAFs investigations and studies extend to a better choice of alternative EUV mask absorbers that can mitigate M3D effects and have better lithography performance. In this paper, a low-n dark field EUV mask with regular hole grid design and positive tone development (PTD) is considered. The SEM (scanning electron microscope) images of through pitches with various SRAFs sizes and combination of SRAF to main space are collected. The SRAFs printing pixels can be captured and modeled with compact resist stochastic modeling. The results can be verified using average printed area (APA) metric with a R3D model and the simulation studies have proved the SRAFs printing sensitivity to the photomask biases.
The common process window of EUV patterning is being limited when the 1-dimensional (1D) pitch shrinks to 32nm or below. There are many investigations and studies that propose an alternative EUV photomask absorber to mitigate photomask 3-dimensional (3D) topology effects and can partially mitigate the contrast fading effect and reduce through pitch best focus shift.1,2,3 Another method to counter photomask 3D effects, is sub-resolution assistant features (SRAFs). SRAF insertion is one possible way to create a dense optical environment, which will prevent strong best focus shift from semi-isolated to isolated features. However, the side effect of SRAF insertion is unwanted SRAF printing occurring on the surface or bottom of the photoresist.4 In order to predict the partial removal or small residues of photoresist after the lithographic development process, a flow of compact photoresist 3D modeling (R3D) in conjunction with stochastic modeling can be adopted. In this paper, a bright field EUV photomask with regular 1D line-space grid design and positive tone development (PTD) are considered. The SEM images of through pitch 1D structures with various sizes of SRAFs are collected. To quantify SRAF printing, pixel brightness is compared to resist-opened background area, the printing SRAF regions can then be identified and clustered. Compact resist stochastic modeling is also performed by line-width roughness (LWR) sampling and used to predict SRAFs printing pixels by using Average Printing Area (APA) method with R3D modeling.5 Therefore, not only severe SRAF printing events can be predicted well, but also the accurate prediction of SRAF printing with very low probabilities can also be achieved.
Photon absorption statistics combined with a simple model of resist chemistry triggered by each absorbed photon leads to a family of stochastic models with a Gaussian Random Field deprotection. Two important aspects of such models are discussed. First, the generalizations to stochastic reaction-diffusion models, accounting for the effects of depletion, and to models accounting for both exposure-resist stochastic and other process parameter variations, are presented. Second, several options for the stochastic metrics of EUVL processes, both meaningful and useful for lithographers and fast enough to be applicable to the full chip OPC and verification, are described, and some details of their implementations for the full-chip OPC verification and the results of tests are presented. The relation of one of the introduced stochastic metrics to the stochastic-caused variability of the electrical conductance of vertical interconnects (vias) is explained.
We report here experimental result of refractive index (RI) sensing using the singly degenerate high quality (Q) factor mode in photonic crystal slab (PCS) with the incident beam close to normal incidence. Q = 3.2×104 was measured with high extinction ratio (ER > 10 dB) for the PCS in air. Q = 1.8×104 and spectral sensitivity (S) of 94.5 nm/RIU were measured in liquid for the PCS. A detection limit (DL) of 10-5 RIU has been achieved with our device. The high-Q for the singly degenerate mode close to normal incidence with relatively high S is very promising to achieve a lower DL for RI sensing.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.