SPIE Journal Paper | 16 March 2017
Irén Juhász Junger, Sarah Homburg, Thomas Grethe, Andreas Herrmann, Johannes Fiedler, Anne Schwarz-Pfeiffer, Tomasz Blachowicz, Andrea Ehrmann
KEYWORDS: Glasses, Dye sensitized solar cells, Solar cells, Absorption, Adsorption, Electrodes, Molecules, Dispersion, Natural surfaces, Particles
In recent years, the development of smart textiles has attracted great attention. Such textiles can contain small electrical devices, which need a power supply. Dye-sensitized solar cells, which can be produced from nontoxic, cheap, low-purity materials, could fill this purpose. However, to reach reasonable cell properties, sintering the TiO2 layer on the substrate is necessary. Unfortunately, only a few textile materials can withstand a sintering process at high temperatures. Therefore, it is important to find an optimal temperature leading to a reasonable improvement of the cell characteristics without damaging the textile substrate. The influence of the sintering temperature on different properties is investigated. For this, the surface properties of the TiO2 coating, such as adhesion to the substrate, dye adsorption characteristic, and film stability, are investigated on different substrates, i.e., a glass plate, a stainless steel nonwoven fabric, and a carbon woven fabric. Two commercially available TiO2 sources are used: a TiO2 dispersion obtained from Man Solar and a water-based solution of TiO2 particles purchased from Kronos. The influence of the sintering temperature on short-circuit current and open-circuit voltage of solar cells on the aforementioned substrates is also examined.
