This will count as one of your downloads.
You will have access to both the presentation and article (if available).
Here, we focus on an optical system for measuring precisely the angular position of flying objects. We designed this subunit of a beam control system exclusively from readily available commercial-off-the-shelf components. Two industrial cameras were used for angle measuring and for guiding the system to the position of the flying object. Both cameras are mounted on a modified astronomical mount with high-precision angle encoders. To achieve a high accuracy we temporally synchronize the acquisition of the angle from the pan tilt unit with the exposure of the camera. Therefore, a FPGA-based readout device for the rotary encoders was designed and implemented. Additionally, we determined and evaluated the influence of the distortion of the lenses to the measurement.
We investigated various scenarios to determine the accuracy and the limitations of our system for angular position determination of flying targets. Performance tests were taken indoor and outdoor at our test sites. A target can be mounted on a fast moving linear stage. The position of this linear stage is continuously read out by a high resolution encoder so we know the target’s position with a dynamic accuracy in the range of a few μm. With this setup we evaluated the spatial resolution of our tracking system. We showed that the presented system can determine the angular position of fast flying objects with an uncertainty of only 2 μrad RMS. With this mobile tracking system for angular position determination of flying targets we designed an accurate cost-efficient opportunity for further developments.
Defect-dominated 1.06-um laser-induced damage of antireflectance coatings designed for use at 1.3 um
High-resolution measurement of temporal and spatial properties of high-power pulsed molecular lasers
View contact details
No SPIE Account? Create one
