Two kinds of sensors were developed that can precisely measure a leaf's thickness. By an analysis of optic characteristics of the gauge head device, the actual transmission characteristic equation was established. The authors analyzed these precision instruments and carefully investigated the structural parameters related with principal error. Therefore, some schemes were proposed to reduce principal error and adjusted actual characteristic. This article also calculated the error resulting from contact deformation of the gauge head.
Two dimeric trimeric phenylenvinylene derivative 2, 5, 2', 5'-tetrakis (4'-fluorostyryl) biphenyl (P-F-TSB) and 2, 5, 2', 5'-tetra (p-trifluoromethylstyryl)-biphenyl (TFM-TSB) have been synthesized as new electroluminescent (EL) materials. P-F-TSB exhibits good color purity, high luminance of blue light-emission in organic light-emitting devices. Maximum brightness and luminous efficiency are of 1828 cd/m2 and of 1.92 cd/A, respectively. CIE coordinates are x=0.20 and y=0.22. Interestingly, we can fabricate single layer white light-emitting device using TFM-TSB as emitting layer. The broad electroluminescence emission band may attribute to long-wavelength excimer and electromer emission in addition to the blue component from singlet excited state of individual TFM-TSB molecule. Furthermore, white-light emission can also be obtained with a typical three-layer structure of ITO/ NPB (50 nm)/ TFM-TSB (50 nm)/ Alq3 (30 nm)/LiF/Al device. The maximum brightness of this device is 809 cd/m2 at 217 mA/cm2 and 13V, and the maximum luminous efficiency is 1.49 cd/A at 11 mA/ cm2 and 8V.
We report on the rough methods for transforming of external quantum
efficiency and power efficiency of organic light-emitting devices (OLEDs). The calculation system based on supposing a perfectly diffuse electroluminescent lambertian surface can be useful for appraising external quantum efficiency and power efficiency in research work. And we set up model of transform for external quantum
efficiency and power efficiency of OLEDs and develop computer program to simulate scaling modulus.
Efficient white organic light-emitting devices are demonstrated by inserting a thin layer of tris (8-hydroxyquinoline) aluminum (Alq) doped with 4-(dicyanomethylene)-2-t-butyl-6-(1,1,7,7-tetramethyljulolidyl-9-enyl) (DCJTB) into N,N'-diphenyl-N,N'-bis(1-naphthyl)-(1,1'-biphenyl)-4,4'-diamine (NPB) layer. Alq without doping is used as an electron-transporting layer and 2,9-dimethyl-4,7-diphenyl-1,10-phenanthroline (bathocuproine or BCP) as an exciton-blocking layer. NPB layers are separated by the doped Alq layer, the layer that sandwiched between BCP and doped Alq layers acts as a blue-emitting layer, and the other as a hole-transporting layer. The doped Alq layer acts as a red and green-emitting as well as chromaticity-tuning layer, whose thickness and position as well as the concentration of DCJTB in Alq permit the tuning of the device spectrum to achieve a balanced white emission with Commission Internationale De L'Eclairage coordinates of (0.33, 0.33), which are largely insensitive to the applied voltages, especially at high brightness (>1000cd/m2). The device have maximum luminance and efficiency of 6745 cd/m2 and 2.56 cd/A, respectively.
Blue and white organic light-emitting devices using a novel dimeric trimeric phenylenvinylene (TPV) derivative , 2,5,2',5'-tetrakis(4'-biphenylenevinyl)-biphenyl (TBVB) containing a biphenyl center are fabricated. Structures of these devices are simple, where tris (8-hydroxyquinoline) aluminum (Alq) and N,N'-diphenyl-N,N'-bis(1-naphthyl)-(1,1'-biphenyl)-4,4'-diamine (NPB) are used as electron-transporting and hole-transporting layers, respectively. In blue device, TBVB is used as light-emitting layer. The peak of electroluminescent (EL) spectra of the device with TBVB is at 468 nm, and its maximum efficiency is greatly higher than that of the reported oligomer poly(phenylenvinylene) (PPV) devices. By inserting an ultra thin layer of rubrene between TBVB and Alq layers, a fairy pure white OLED with CIE coordinates of (0.33, 0.34) is realized. Its maximum luminances and efficiencies are 4025 cd/m2 and 3.2 cd/A, respectively.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.