According to the difficulty of cutting the ZTC4 material, slot cutting experiments were designed and three directional dynamic milling force were obtained. Instantaneous milling force model and multiple linear regression was used to analyze three directional milling force coefficients and edge milling force coefficients. To evaluate the performance of the dynamic milling force model, a new slot cutting experiment was designed. The comparison of simulations and experiments indicates the average milling force error are 5.74%, 3.93%, 7.98%, the dynamic milling force prediction model fits well in cycle, trend and amplitude. The feasibility and accuracy of the model for predicting the instantaneous milling force is verified.
The primary mirror component is an important part of the Cassegrain system. As the first-stage imaging component, the RMS surface error directly affects the image quality of the whole optical system. In this article, taking the primary mirror component of a certain type of Cassegrain aerial camera as the research object, the factors affecting the RMS precision of the primary mirror surface are analyzed in detail from aspects of back supporting structure design, platen elastic crimping design, simulation analysis, test verification and so on. Using the finite element method to simulate the primary mirror supporting structure, analyzes the influence on the primary surface error by the three-point supporting structure in different positions. Furthermore, analyzes the variations of the primary mirror surface error under the influence of three-point supporting structure and pressure plate. The last but not the least, analyzes the primary mirror surface error under the different pressure conditions, concludes the optimal supporting point position and the excellent elastic compression. After the primary mirror assembling, through test verification, the RMS is 0.0270λ, which is better than the original design requirement of λ/35(0.0286λ). And the RMS variation between before and after assembling is less than 0.005λ. Performing the high and low temperature test on the primary component, after test, the RMS values is 0.0269λ, it proves that the primary frame structure and its axial supporting structure have little effects on the RMS precision of the primary mirror. It can also meet the requirement of the large-aperture primary mirror surface in the co-optical system under complex conditions. The feasibility of the structure design has been verified.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.