Development Of A 10-Channel Wavelength Division Multiplexer/Demultiplexer Fabricated By An X-Ray Micromachining Process

B. Anderer; W. Ehrfeld; D. Munchmeyer

doi:10.1117/12.949416

5 April 1989 Development Of A 10-Channel Wavelength Division Multiplexer/Demultiplexer Fabricated By An X-Ray Micromachining Process

B. Anderer, W. Ehrfeld, D. Munchmeyer

Author Affiliations +

Proceedings Volume 1014, Micro-Optics; (1989) https://doi.org/10.1117/12.949416
Event: 1988 International Congress on Optical Science and Engineering, 1988, Hamburg, Germany

Abstract

In fiber-optics communications wavelength division multiplexing constitutes a means of increasing the information capacity of fibers. For application in a multimode fiber-optics transmission line a passive grating multiplexer / demultiplexer is being developed using the LIGA technique (German acronym for Lithographie, Galvanoformung, Abformung), which is a combination of deep-etch synchrotron radiation lithography, galvanoforming, and moulding. The optical configuration consists of a polymer slab waveguide, structured by X-ray lithography, with an integrated selffocusing, blazed reflection grating and an integrated fiber alignment support. Optimized blaze angles over the whole grating width, varying grating constants, and a free choice of the grating curvature with an accuracy of 0.5 μm can be realized for a grating. A grating design was worked out using Fermat's principle of geometric optics, including the light path function of a noncircular, cylindric grating with varying grating constants. For the 10 spectral channels (985 nm - 1300 nm, channel spacing 35 nm) coma and spherical aberration become negligible. In addition the focal conditions were examined by a ray trace procedure. The lateral dimensions of the device are about 2 cm x 1 cm. An X-ray mask for such a device was fabricated and first X-ray exposures of a polymethylmethacrylate (PMMA) resist served to examine the quality of the grating structure. Furthermore, a 125 μm thick 3-level X-ray resist with a PMMA core was fabricated and the structure accuracy after an X-ray exposure with a test pattern was examined.

Citation Download Citation

B. Anderer, W. Ehrfeld, and D. Munchmeyer "Development Of A 10-Channel Wavelength Division Multiplexer/Demultiplexer Fabricated By An X-Ray Micromachining Process", Proc. SPIE 1014, Micro-Optics, (5 April 1989); https://doi.org/10.1117/12.949416

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available