Paper
10 April 1989 Engineering Aspects Of Long Pulse CO2 Lasers Employing Plasma Discharge Electrodes
R. A. Petr, M. J. Yoder, R. B. Schaefer
Author Affiliations +
Proceedings Volume 1046, Pulse Power for Lasers II; (1989) https://doi.org/10.1117/12.951343
Event: OE/LASE '89, 1989, Los Angeles, CA, United States
Abstract
We report on an experimental long pulse CO2 laser (25uS at 100) that employed two plasma electrodes and an impedance-matched external sustainer pulser to preionize and electrically pump the CO2 laser mixture. The plasma electrodes, each measuring 7cm wide by 100cm long, were struck on by a 1011 V/S voltage trigger wavefront, and were found to have a uniform arc distribution along the electrodes in argon, but showed severe arc striations in CO2 mixtures. These striations resulted in non-uniform laser preionization, which in turn caused the sustainer discharge to constrict. Consequently the active laser volume was not pumped uniformly and the system did not lase. However, the CO2 discharge did not collapse into a low-impedance arc at energy loading greater than 350 J/1-atm and 25uS pulse duration, indicating that by improving the arc uniformity on the plasma electrodes, this approach can be useful for high energy, long pulse lasers. Finally, important engineering issues like system life, and size and weight scaling for the plasma electrode CO2 laser are discussed.
© (1989) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
R. A. Petr, M. J. Yoder, and R. B. Schaefer "Engineering Aspects Of Long Pulse CO2 Lasers Employing Plasma Discharge Electrodes", Proc. SPIE 1046, Pulse Power for Lasers II, (10 April 1989); https://doi.org/10.1117/12.951343
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Electrodes

Plasma

Carbon dioxide lasers

Pulsed laser operation

Carbon dioxide

Laser systems engineering

Gas lasers

RELATED CONTENT


Back to Top